 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| m t a , c s t - 1 0 0 i i , s l - 1 5 6 a n d a m p e c o n o m y p o w e r ( e p ) c o n n e c t o r s not the latest revision
2 ? 1977, 1978, 1979, 1980, 1983, 1986, 1988, 1992, 1993, 1994, 1995, 1999, 2000, 2001, 2002, 2003 and 2005 by tyco electronics corporation. all international rights reserved. amp, amp -o- lectric, amp-o- matic, ampomator, certi - crimp, pro- crimper, madison cable and tyco are trademarks. teflon is a trademark of e.i. dupont de nemours and company. other products, logos, and company names mentioned herein may be trademarks of their respective owners. introduction and table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 3 connector selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .050 [1.27] centerline connectors mta-50 idc connectors and headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10 introduction and wire-to-board mateability guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 idc connector kits (feed-thru and closed end) ribbon cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6 discrete wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8 through-hole header assemblies vertical and right-angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 surface mount header assemblies vertical and right-angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 .100 [2.54] centerline connectors mta-100 idc connectors and headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-31 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 wire-to-board mateability guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13 connectors ul94v-2 and ul94v-0 closed end with and without polarizing tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 feed-thru with and without polarizing tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15 led closed end and feed-thru ul94v-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17 posted connectors mateability guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19 mta-100 posted connectors (wire-to-wire) ul94v-2 closed end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 feed-thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 headers ul94v-0 flat straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 narrow flat straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 polarized straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 friction lock straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 headers with retention peg straight posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 high profile headers right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 polarized high temperature, straight and right-angle posts . . . . . . . . . . . . . . . . .27 friction lock high temperature, straight and right-angle posts . . . . . . . . . . . . . .28 polarized surface mount, straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 friction lock surface mount, straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 shrouded straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 cst-100 ii crimp contacts, housings and shrouded headers . . . . . . . . . . . . . . . . . . . . . . . . .31, 32 .156 [3.96] centerline connectors mta-156 idc connectors and headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-57 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 wire-to-board mateability guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35 connectors ul94v-2 and ul94v-0 closed end with locking ramp, with and without polarizing tabs . . . . . . . . . . .36, 37 closed end without locking ramp, with and without polarizing tabs . . . . . . . . .36, 37 feed-thru with locking ramp, with and without polarizing tabs . . . . . . . . . . . . .38, 39 feed-thru without locking ramp, with and without polarizing tabs . . . . . . . . . . .38, 39 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-42 posted connectors mateability guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44 mta-156 posted connectors (wire-to-wire) ul94v-2 closed end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 feed-thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 mta-156 headers ul94v-0 flat straight posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 flat right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 friction lock straight posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 friction lock right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 polarized lock straight posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 polarized lock right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 friction lock high temperature, straight posts . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 shrouded straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 mta-156 quad connectors ul94v-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54, 55 closed end with locking ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 feed-thru with locking ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 introduction this catalog has been designed to assist you, our customer, iden- tify products to satisfy your con- nector needs for printed circuit board headers, mass termination connectors preloaded with con- tacts, crimp-snap contacts and housings, and card edge con- nectors with preloaded contacts. the list at right identifies by centerline the types of product available and is meant to be of assistance to you in the product selection process. idc mta-50 idc mta-100 crimp cst-100 ii idc mta-156 catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 mta, cst-100 ii, sl-156 and amp economy power (ep) connectors table of contents 3 mta-156 card edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 57 connectors ul94v-0 closed end with and without mounting ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 feed-thru with and without mounting ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 sl-156 crimp connectors and headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-62 wire-to-board mateability guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 wire-to-board crimp contacts and keying plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 wire-to-board housings ul94v-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 housings with through board latch ul94v-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 housings and contacts for large insulation diameter (lid) wire . . . . . . . . . . . . . . . . . .62 amp economy power (ep) connector system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-69 .156 [3.96] centerline connectors introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 crimp contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 plug housings, low-profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 low-profile headers straight and right-angle posts . . . . . . . . . . . . . . . . . . . . . . . . . .65 low-profile headers, high temp. straight and right-angle posts . . . . . . . . . . . . . . .66 .200 [5.08] centerline connectors plug housings and straight and right-angle post headers . . . . . . . . . . . . . . . . . . . . . .67 .312 [7.92] centerline connectors low-profile headers straight posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 single connectors 1-position plug housing and high-profile header straight post . . . . . . . . . . . . . . . . .69 mta wire selection and ribbon cable preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 idc ribbon cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-74 mta wire termination flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 mta application tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-79 part number index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-82 global contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 center- contact wire-to- no. of wire wire current voltage operating ul replace- product name line termin- wire positions size insulation rating rating temp. flammability ment approvals ation option (awg) dia. max. (a)** max. (vac) range (c) contacts .050" centerline mta-50 idc connector .050 idc planned 2C28 30C26 .039* 1 30 C55 to +105 v-0 & v-2 no kits and headers 1.27 0.99 .100" centerline mta-100 connectors .100 idc yes 2C28 28C22 .060* 5 250 C55 to +105 v-0 & v-2 yes and headers 2.54 1.52 cst-100 ii contacts .100 crimp planned 2C28 26C22 .065 4 250 C55 to +105 v-0 yes and housings 2.54 1.65 .156" centerline mta-156 connectors .156 idc yes 2C24 26C18 .095* 7 600 C55 to +105 v-0 & v-2 yes and headers 3.96 2.41 quad connectors .156 idc no 2C12 22C18 .095* 12.5 600 C55 to +105 v-0 yes 3.96 2.41 sl-156 contacts .156 1C24; 2C10 .105 and housings 3.96 crimp no w/ through 24C18 2.67 10 250 C25 to +105 v-0 yes board latch sl-156 large ins. dia. (lid) .156 crimp no 2C24 24C16 .112 10 250 C25 to +105 v-0 yes contacts and housings 3.96 2.84 .156", .200" and .312" centerlines .156 crimp no 1C12 22C18 .118 8 (1 pos.) 250 C25 to +105 v-0 yes 3.96 3.00 7.5 (2C12 pos.) amp economy power .200 crimp no 2C12 22C18 .118 250 C25 to +105 v-0 yes (ep) connector system 5.08 3.00 7.5 (2C12 pos.) .312 crimp no 2C5 22C18 .118 250 C25 to +105 v-0 yes 7.92 3.00 7.5 (2C5 pos.) * * when terminated one position at a time. ** current rating is application dependent. need more information? call technical support at the numbers listed below. technical support is staffed with specialists well versed in tyco electronics products. they can provide you with: technical support catalogs technical documents product samples authorized distributor locations r r r r r r r r r r r r r r r r r r r r connector selection guide crimp sl-156 crimp amp ep connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 mta, cst-100 ii, sl-156 and amp economy power (ep) connectors table of contents (continued) 4 mta-50 .050 [1.27] product facts 2C28 contact positions connectors terminate 26, 28 and 30 awg discrete wire or .050 [1.27] centerline rib- bon cable color-coded housings maximum cable insulation diameter of .039 [0.99] with pvc insulation only idc contacts pre-loaded in receptacle housing 30 v, 1 a contact rating contact design allows for gold-to-gold or tin-to-tin interface contacts are lubricated to prevent fretting corrosion wire feed-thru capability for daisy-chain wiring or closed end for point-to-point wiring connectors are polarized for proper mating manual and semiautomatic application tooling mating heights shown below: component recognized by underwriters laboratories inc. to us and canadian standards, file no. e28476 (connectors and headers) file no. e53793 (ribbon cable) the mta-50 idc connector system is a wire-to-printed cir- cuit board system with con- tacts in a staggered, single row on .050 [1.27] centerline. the design features wire feed- through capability for daisy- chain applications. insulation displacement contacts are used to terminate a wide range of conductor sizes. ribbon cable can also be ter- minated when the appropriate receptacle assembly and strain relief cover are used. header assemblies for board mount applications include right-angle (horizontal) and vertical mount products. these are available in through-hole and surface mount configurations. typical uses of the mta-50 idc connectors would be in the appliance, commercial and home equipment and security products industries. see the following pages for related products: ribbon cable (reels), .050 [1.27] centerline (p. 71) application tooling (p. 76) cable assemblies (p. 74) performance data voltage rating 30 vac current rating 1 amp max. low-level resistance 30 milliohms dielectric withstanding voltage 500 vac insulation resistance 1,000 megohms operating temperature C55c to +105c for connector only; cable rating may be lower technical documents application specification 114-13072 mta-50 connectors product specifications 108-2113 mta-50 connectors 100-4703 madison cable cable specification (28 awg, 7/36 tinned copper, pvc insulation) 100-6257 madison cable cable specification (28 awg, 7/36 tinned copper, tpo insulation) .503 [12.78] or .254 [6.45] max. vertical max. right-angle these matrixes have been prepared to assist you in defining the correct mating halves for the mta-50 header and connector kit combina- tion. where a y is indicated the combination is a valid mating pair. note: txbn ekdbsqnmhbr cndr not qdb- nlldmc hmsdql_shmf bnmmdbsnqr _mc gd_cdqr vhsg cheedqdms bnms_bs ok_s- hmfr. 1445120 1445121 1445169 1445172 connector kits 1445343 xx xx 1445346 xx xx 1445349 xx xx 1445352 xx xx 1445355 xx xx 1445358 xx xx 1445361 xx xx 1445364 xx xx 1445367 xx xx 1445370 xx xx 1445373 xx xx 1445376 xx xx 1445125 1445126 1445171 1445174 headers connector kits matrix for .000030 [0.00076] gold plated part numbers 1445342 xx x x 1445345 x xxx 1445348 x xxx 1445351 x xxx 1445354 x xxx 1445357 x xxx 1445360 x xxx 1445363 x xxx 1445366 x xxx 1445369 x xxx 1445372 x xxx 1445375 x xxx 1445123 1445124 1445170 1445173 connector kits matrix for .000015 [0.00038] gold plated part numbers matrix for tin plated part numbers 1445341 xxxx 1445344 xxxx 1445347 xxxx 1445350 xxxx 1445353 xxxx 1445356 xxxx 1445359 xxxx 1445362 xxxx 1445365 xxxx 1445368 xxxx 1445371 xxxx 1445374 xxxx headers headers mta-50 idc connector kit / header mateability guide mta-50 idc connectors and headers mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 5 mta-50 .050 [1.27] connector kits ribbon cable feed-thru and closed end connectors material and finish housing ul 94v-2 rated, thermo- plastic contacts phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel color coding by wire size for ul94v-0 connectors 26 awg blue 28 awg green 30 awg brown for strain relief covers see page 6. for mating headers see pages 9 and 10. for mateability guide, see matrixes on page 4. a .004 [ 0.10] (see note 1) .050 [1.27] .035 [0.89] .100 .003 [2.54 0.08 ] .190 .003 [4.83 0.08 ] ref. ref. position 1 .150 [3.81] .315 .006 [8.00 0.15 ] connector kit ordering information connector kit consists of receptacle assembly and strain relief cover. base part number prefixes and suffixes indicate the number of circuit positions, for example: base part num- ber 1445359 2 position = 0-1445359-2 and 28 position = 2-1445359-8 base part numbers connector feed-thru closed end type & connector kit no. of connector kit no. of wire size part nos. circuits part nos. circuits tin plated 26 awg 1445359 2C28 1445368 2C28 0.12C0.15 ll 2 28 awg 1445362 2C28 1445371 2C28 0.08C0.09 ll 2 30 awg 1445365 2C28 1445374 2C28 0.05C0.06 ll 2 .000030 [0.00076] gold plated 26 awg 1445361 2C28 1445370 2C28 0.12C0.15 ll 2 28 awg 1445364 2C28 1445373 2C28 0.08C0.09 ll 2 30 awg 1445367 2C28 1445376 2C28 0.05C0.06 ll 2 .000015 [0.00038] gold plated 26 awg 1445360 2C28 1445369 2C28 0.12C0.15 ll 2 28 awg 1445363 2C28 1445372 2C28 0.08C0.09 ll 2 30 awg 1445366 2C28 1445375 2C28 0.05C0.06 ll 2 notes: 1. tn cdsdqlhmd bnmmdbsnq nudq_kk kdmfsg &chl. a(, ltkshokx .050 w sgd mtladq ne bhqbthsr _mc _cc .082. ew_lokd: .050 w 10 bhqbthsr dpt_kr 0.50 * .082 ? .582 [14.78]. 2. ssq_hm qdkhde bnudqr rgnvm nm o_fd 6 _qd qdpthqdc _mc rnkc _r o_qs ne sgd cnmmdbsnq khs. 3. ssq_mcdc ul ssxkd 1061 nq dpthu- _kdms vhqd hr qdbnlldmcdc. 4. umkdrr nsgdqvhrd rs_sdc _kk snkdq- _mbdr &dwbdos ok_shmf( sn ad .005 [0.13]. 5. cnmrtks pqnctbs dq_vhmf enq rnhs cnlokh_ms hmenql_shnm. note: thm-ok_sdc bnmmdbsnqr _mc gd_cdqr hm dudm onrhshnm rhydr eqnl 2C12 _mc 18 _qd rsnbidc o_qsr; _kk nsgdq onrhshnm rhydr _mc oqnctbsr vhsg fnkc-ok_sdc bnms_bsr _qd m_id tn oqcdq. receptacle assemblies ribbon cable mta-50 idc connectors and headers (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 6 mta-50 .050 [1.27] .090 [2.29] 4 plcs. .040 [1.02] .068 [1.73] 2 plcs. 2 plcs. a .255 [6.48] .237 .008 [6.02 0.20 ] strain relief covers material and finish strain relief cover ul 94v-0 rated, thermoplastic, black closed end feed-thru and closed end no. of circuits dim. a no. of circuits dim. a 16 .960 24.38 17 1.010 25.65 18 1.060 26.92 19 1.110 28.19 20 1.160 29.46 21 1.210 30.73 22 1.260 32.00 23 1.310 33.27 24 1.360 34.54 25 1.410 35.81 26 1.460 37.08 27 1.510 38.35 28 1.560 39.62 2 .260 6.60 3 .310 7.87 4 .360 9.14 5 .410 10.41 6 .460 11.68 7 .510 12.95 8 .560 14.22 9 .610 15.49 10 .660 16.76 11 .710 18.03 12 .760 19.30 13 .810 20.57 14 .860 21.84 15 .910 23.11 closed end .123 .006 [3.12 0.15 ] .237 .008 [6.02 0.20 ] a feed-thru feed-thru connector kits ribbon cable (continued) mta-50 idc connectors and headers (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 7 mta-50 .050 [1.27] connector kits discrete wire feed-thru and closed end connectors material and finish housing ul 94v-2 rated, thermo- plastic contacts phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel color coding by wire size for ul94v-0 connectors 26 awg blue 28 awg green 30 awg brown for strain relief covers see page 8. for mating headers see pages 9 and 10. for mateability guide, see matrixes on page 4. a .004 [ 0.10] (see note 1) .050 [1.27] .035 [0.89] .100 .003 [2.54 0.08 ] .190 .003 [4.83 0.08 ] ref. ref. position 1 .150 [3.81] .315 .006 [8.00 0.15 ] base part numbers connector feed-thru closed end type & connector kit no. of connector kit no. of wire size part nos. circuits part nos. circuits tin plated 26 awg 1445341 2C28 1445350 2C28 0.12C0.15 ll 2 28 awg 1445344 2C28 1445353 2C28 0.08C0.09 ll 2 30 awg 1445347 2C28 1445356 2C28 0.05C0.06 ll 2 .000030 [0.00076] gold plated 26 awg 1445343 2C28 1445352 2C28 0.12C0.15 ll 2 28 awg 1445346 2C28 1445355 2C28 0.08C0.09 ll 2 30 awg 1445349 2C28 1445358 2C28 0.05C0.06 ll 2 .000015 [0.00038] gold plated 26 awg 1445342 2C28 1445351 2C28 0.12C0.15 ll 2 28 awg 1445345 2C28 1445354 2C28 0.08C0.09 ll 2 30 awg 1445348 2C28 1445357 2C28 0.05C0.06 ll 2 notes: 1. tn cdsdqlhmd bnmmdbsnq nudq_kk kdmfsg &chl. a(, ltkshokx .050 w sgd mtladq ne bhqbthsr _mc _cc .082. ew_lokd: .050 w 10 bhqbthsr dpt_kr 0.50 * .082 ? .582 [14.78]. 2. ssq_hm qdkhde bnudqr rgnvm nm o_fd 8 _qd qdpthqdc _mc rnkc _r o_qs ne sgd cnmmdbsnq khs. 3. ssq_mcdc ul ssxkd 1061 nq dpthu- _kdms vhqd hr qdbnlldmcdc. 4. umkdrr nsgdqvhrd rs_sdc _kk snkdq- _mbdr &dwbdos ok_shmf( sn ad .005 [0.13]. 5. cnmrtks pqnctbs dq_vhmf enq rnhs cnlokh_ms hmenql_shnm. connector kit ordering information connector kit consists of receptacle assembly and strain relief cover. base part number prefixes and suffixes indicate the number of circuit positions, for example: base part num- ber 1445341 2 position = 0-1445341-2 and 28 position = 2-1445341-8 note: thm-ok_sdc bnmmdbsnqr _mc gd_cdqr hm dudm onrhshnm rhydr eqnl 2C12 _mc 18 _qd rsnbidc o_qsr; _kk nsgdq onrhshnm rhydr _mc oqnctbsr vhsg fnkc-ok_sdc bnms_bsr _qd m_id tn oqcdq. receptacle assemblies discrete wire mta-50 idc connectors and headers (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 8 mta-50 .050 [1.27] strain relief covers material and finish strain relief cover ul 94v-0 rated, thermoplastic, black closed end no. of circuits dim. a no. of circuits dim. a 16 .960 24.38 17 1.010 25.65 18 1.060 26.92 19 1.110 28.19 20 1.160 29.46 21 1.210 30.73 22 1.260 32.00 23 1.310 33.27 24 1.360 34.54 25 1.410 35.81 26 1.460 37.08 27 1.510 38.35 28 1.560 39.62 2 .260 6.60 3 .310 7.87 4 .360 9.14 5 .410 10.41 6 .460 11.68 7 .510 12.95 8 .560 14.22 9 .610 15.49 10 .660 16.76 11 .710 18.03 12 .760 19.30 13 .810 20.57 14 .860 21.84 15 .910 23.11 feed-thru and closed end feed-thru .040 [1.02] .068 [1.73] .090 [2.29] 4 plcs. 2 plcs. 2 plcs. .255 [6.48] .237 .008 [6.02 0.20 ] a closed end .123 .006 [3.12 0.15 ] .237 .008 [6.02 0.20 ] a feed-thru connector kits discrete wire (continued) mta-50 idc connectors and headers (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 9 mta-50 .050 [1.27] right-angle a .035 [0.89] .125 [3.18] .016 [0.41] .050 [1.27] ref. ref. ref. ref. circuit #1 .180 [4.57] .220 .003 [5.59 0.08 ] .035 [0.89] ref. vertical material and finish housing ul 94v-0 rated, thermo- plastic, black contacts brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder legs; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel .035 [0.89] ref. circuit #1 .060 [1.52] .125 [3.18] a ref. .050 [1.27] .016 [0.41] ref. ref. .035 [0.89] .170 [4.32] .220 .003 [5.59 0.08 ] ref. base part numbers through-hole header no. of part nos. posts standard ul 94v-0, tin plated 1445120 2C28 standard ul 94v-0 .000030 [0.00076] gold plated 1445125 2C28 standard ul 94v-0 .000015 [0.00038] gold plated 1445123 2C28 note: to determine header overall length (dim. a), multiply .050 x the number of circuits and add .150. example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .100 [2.54] .035 [0.89] .210 [5.33] .050 [1.27] .250* [6.35] .031 .00 2 [0.78 0.0 5 ] circuit #1 typ. dia. typ. recommended mounting hole size and pattern for .062 [1.57] thick pc board * 6-circuit dim. shown, refer to product drawing for actual pcb dimensions and rohs compliant information. base part numbers through-hole header no. of part nos. posts standard ul 94v-0, tin plated 1445169 2C28 standard ul 94v-0 .000030 [0.00076] gold plated 1445171 2C28 standard ul 94v-0 .000015 [0.00038] gold plated 1445170 2C28 .100 [2.54] .250* [6.35] .035 [0.89] .068 [1.73] .0705 [1.90] * 6-circuit dim. shown, refer to product drawing for actual pcb dimensions and rohs compliant information. .050 [1.27] .031 .0 02 [0.78 0. 05 ] .060 .003 [1.52 0. 08 ] circuit #1 typ. dia. typ. dia. typ. recommended mounting hole size and pattern for .062 [1.57] thick pc board header ordering information :vm] ivln gofw]l il]_cr]m vg[ mo__cr]m cg[cxvn] nb] gofw]l h_ xclxocn ihmcnchgm( _hl ]rvfie]6 :vm] ivln gof) w]l -001-., . ihmcnchg 8 ,)-001-.,). vg[ .4 ihmcnchg 8 .)-001-.,)4 bhl fvncga ;hgg]xnhl fcnm m]] iva]m 1 nblhoab 4* bhl fvn]vwcecns hinchgm( m]] fvnlcr]m hg iva] 0* note: tin-plated connectors and headers in even position sizes from 2C12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are make to order. through-hole header assemblies mta-50 idc connectors and headers (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 10 mta-50 .050 [1.27] right-angle vertical material and finish housing ul 94v-0 rated, thermo- plastic, black contacts brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder pads; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel boardlock phosphor bronze, tin plated .000100 [0.000254] min. over .000050 [0.00127] min. nickel .035 [0.89] ref. circuit #1 a .170 [4.32] .249 [6.32] .220 .003 [5.59 0.08 ] ref. for mating connector kits see pages 5 through 8. for mateability options, see matrixes on page 4. note: to determine header overall length (dim. a), multiply .050 x the number of circuits and add .150. example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .162 [4.11] .128 [3.25] .100 [2.54] * 6-circuit dim. shown, refer to product drawing for actual pcb dimensions and rohs compliant information. .050 [1.27] circuit #1 typ. .028 .001 [0.71 0.03 ] .075 .001 [1.91 0.03 ] .070 .003 [1.78 0.08 ] 2 plcs. .145 .003 [3.68 0.08 ] 2 plcs. .574* [14.58] recommended pc board layout for use with .010 [0.25] thick stencil typ. base part numbers surface mount header no. of part nos. posts standard ul 94v-0, tin plated 1445172 2C28 standard ul 94v-0 .000030 [0.00076] gold plated 1445174 2C28 standard ul 94v-0 .000015 [0.00038] gold plated 1445173 2C28 base part numbers surface mount header no. of part nos. posts standard ul 94v-0, tin plated 1445121 2C28 standard ul 94v-0 .000030 [0.00076] gold plated 1445126 2C28 standard ul 94v-0 .000015 [0.00038] gold plated 1445124 2C28 note: all smt product is pre- packaged in standard tape and reel format. .162 [4.11] .574* [14.58] .100 [2.54] .100 [2.54] * 6-circuit dim. shown, refer to product drawing for actual pcb dimensions and rohs compliant information. .050 [1.27] circuit #1 typ. .100 [2.54] typ. typ. typ. .028 .001 [0.71 0.03 ] .065 .001 [1.65 0.03 ] .070 .003 [1.78 0.08 ] 2 plcs. .145 .003 [3.68 0.08 ] 2 plcs. recommended pc board layout for use with .010 [0.25] thick stencil header ordering information base part number prefixes and suffixes indicate the number of circuit positions, for example: base part num- ber 1445121 2 position = 0-1445121-2 and 28 position = 2-1445121-8 a .050 [1.27] .035 [0.89] ref. ref. circuit #1 .180 [4.57] .270 [6.86] .220 .003 [5.59 0.08 ] ref. note: tin-plated connectors and headers in even position sizes from 2C12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are make to order. surface mount header assemblies mta-50 idc connectors and headers (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 11 mta-100 .100 [2.54] product facts connectors and headers for 2 through 28 positions; wire sizes of 22, 24, 26 and 28 awg [0.4-0.08 mm 2 ] wire-to-post connectors preloaded with dual beam contacts connectors and headers, except shrouded headers, are end-to-end stackable connector styles include both closed end and feed- thru connectors with locking ramps, with and without polarizing tabs molded ribs on housing do not allow reverse mating posted connectors for 2 through 19 positions connectors preloaded with idc contacts all contacts are slotted for insulation displacement (idc) terminal technique contacts are lubricated for fretting corrosion protection benefits derived from the mta-100 system include increased quality and ease of handling such a s one-step assembly no wire stripping no contact damage reduced wiring errors simpler tooling simple maintenance and repair meets the material require- ments of table 23.1 of ul1410 standards for television receiver and video products (wire-to- post connectors only) recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 r r technical documents product specification 108-1050 mta-100 connectors application specifications 114-1019 mta-100 connectors 114-1031 mta-100 ribbon cable assembly mta-100 connectors accept discrete and ribbon cable wire sizes ranging from 22 C 28 awg [0.4 C 0.08 mm 2 ] with maximum insulation outside diameter of .060 [1.52] for terminat- ing single wire and .050 [1.27] for mass termination of wires. tin plated solid, fused stranded, or stranded (7 strands) wire with pvc insulation can be used on 22 C 28 awg [0.4 C 0.9 mm 2 ] mta-100 connectors and 19 stranded wire on 22C24 awg [0.4C 0.2 mm 2 ] mta-100 connectors. only performance data* voltage rating 250 vac current rating 5 amp max. low-level resistance 6 m max. initial dielectric withstanding voltage 750 vac/1 min. insulation resistance 5000 m min. initial operating temperature 55 c to 105 c note: refer to page 70 for approved wire listings. one wire to be terminated into an idc contact slot. the wire-to-post connector housing material is flame retardant thermoplastic, either ul94v-2 or ul94v-0 rated. a full line of .100 [2.54] centerline headers com- pletes the system. headers are available with straight or right-angle posts, in flat, polarized or friction lock styles. headers are avail- able in 2 through 28 positions. shrouded headers are available in 2 through 14 positions. *refer to the product specification for additional electrical, mechanical and environmental performance tests and requirements. .100 [2.54] centerline mta-100 idc connectors and headers mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 647532 1744075 647609 12 mta-100 .100 [2.54] this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-100 header and connector combination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not acceptable for mating. 640440 yyyyyyyyyyyyyyyyyyn 640441 yyyyyyyyyyyyyyyyyyn 640442 yyyyyyyyyyyyyyyyyyn 640443 yyyyyyyyyyyyyyyyyyn 640468 yyyyyyyyyyyyyyyyyyn 640469 yyyyyyyyyyyyyyyyyyn 640470 yyyyyyyyyyyyyyyyyyn 640471 yyyyyyyyyyyyyyyyyyn 640620 yyyyyyyyyyyyyyyyyyn 640621 yyyyyyyyyyyyyyyyyyn 640622 yyyyyyyyyyyyyyyyyyn 640623 yyyyyyyyyyyyyyyyyyn 641311 yyyyyyyyyyyyyyyyyyn 641312 yyyyyyyyyyyyyyyyyyn 641313 yyyyyyyyyyyyyyyyyyn 641314 yyyyyyyyyyyyyyyyyyn 641534 yyyyyyyyyyyyyyyyyyn 641535 yyyyyyyyyyyyyyyyyyn 641536 yyyyyyyyyyyyyyyyyyn 641537 yyyyyyyyyyyyyyyyyyn 641653 yyyyyyyyyyyyyyyyyyn 641654 yyyyyyyyyyyyyyyyyyn 641655 yyyyyyyyyyyyyyyyyyn 641656 yyyyyyyyyyyyyyyyyyn 643498 yyyyyyyyyyyyyyyyyyn 643813 yyyyyyyyyyyyyyyyyyn 643814 yyyyyyyyyyyyyyyyyyn 643815 yyyyyyyyyyyyyyyyyyn 643816 yyyyyyyyyyyyyyyyyyn 643828 yyyyyyyyyyyyyyyyyyn 644083 yyyyyyyyyyyyyyyyyyn 644312 yyyyyyyyyyyyyyyyyyn 644313 yyyyyyyyyyyyyyyyyyn 644497 yyyyyyyyyyyyyyyyyyn 644511 yyyyyyyyyyyyyyyyyyn 644512 yyyyyyyyyyyyyyyyyyn 644513 yyyyyyyyyyyyyyyyyyn 644514 yyyyyyyyyyyyyyyyyyn 644540 yyyyyyyyyyyyyyyyyyn 644563 yyyyyyyyyyyyyyyyyyn 644564 yyyyyyyyyyyyyyyyyyn 644565 yyyyyyyyyyyyyyyyyyn 644574 yyyyyyyyyyyyyyyyyyn 644575 yyyyyyyyyyyyyyyyyyn 644576 yyyyyyyyyyyyyyyyyyn 644577 yyyyyyyyyyyyyyyyyyn 644578 yyyyyyyyyyyyyyyyyyn 644579 yyyyyyyyyyyyyyyyyyn 644795 yyyyyyyyyyyyyyyyyyn *1375820 yyyyyyyynnyynnyyyyy *select contact plating to match header plating. nnyyy yyyyyyy yy nnyyy yyyyyyy yy n nyyy yy yy yyy y y nnyyy yyyyyyy yy nnyyy yyyyyyy yy n nyyy yy yy yyy y y n nyyy yy yy yyy y y nnyyy yyyyyyy yy nnyyy yyyyyyy yy n nyyy yy yy yyy y y nnyyy yyyyyyy yy nnyyy yyyyyyy yy n nyyy yy yy yyy y y n nyyy yy yy yyy y y nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy nnyyy yyyyyyy yy yyyyyyyyyyyyyy 640452 640453 640454 640455 640456 640457 644456 644457 644486 644488 644694 644695 644803 644861 644874 644875 644876 644877 644892 644893 644894 647047 647048 647050 647051 647106 647166 headers connectors matrix for tin plated part numbers 647502 647531 647623 mta-100 connector/header mateability guide mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 13 mta-100 .100 [2.54] 641237 yyyyyyyy yyyynnnyyy 641238 yyyyyyyy yyyynnnyyy 641239 yyyyyyyy yyyynnnyyy 641240 yyyyyyyy yyyynnnyyy 641241 yyyyyyyy yyyynnnyyy 641242 yyyyyyyy yyyynnnyyy 641243 yyyyyyyy yyyynnnyyy 641244 yyyyyyyy yyyynnnyyy 644020 yyyyyyyy yyyynnnyyy 644042 yyyyyyyy yyyynnnyyy 644043 yyyyyyyy yyyynnnyyy 644044 yyyyyyyy yyyynnnyyy 644702 yyyyyyyy yyyynnnyyy 644726 yyyyyyyy yyyynnnyyy *1375820 yyyyyynnyyyyyyyyyy yyyyyyyy yyyyyyyy y yyyyyyy yyyyyyyy yyyyyyyy y yyyyyyy y yyyyyyy yyyyyyyy yyyyyyyy y yyyyyyy yyyyyyyy yyyyyyyy y yyyyyyy y yyyyyyy yyyyyyyy 641211 641212 641213 641214 641215 641216 644487 644489 644884 644885 644886 644887 644896 644897 644898 647108 647109 647114 647116 647117 647168 headers connectors this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-100 header and connector combination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not acceptable for mating. matrix for .000030 [0.00076] gold plated part numbers 641190 yyyyyyyy yyyyy yyyyyyy y 641191 yyyyyyyy yyyyy yyyyyyy y 641192 yyyyyyyy yyyyy yyyyyyy y 641193 yyyyyyyy yyyyy yyyyyyy y 641198 yyyyyyyy yyyyy yyyyyyy y 641199 yyyyyyyy yyyyy yyyyyyy y 641200 yyyyyyyy yyyyy yyyyyyy y 641201 yyyyyyyy yyyyy yyyyyyy y 644038 yyyyyyyy yyyyy yyyyyyy y 644040 yyyyyyyy yyyyy yyyyyyy y 647477 yyyyyyyy yyyyy yyyyyyy y 647480 yyyyyyyy yyyyy yyyyyyy y *1375820 nnnnnnnn nnnnn nnnnnny y 1744020 yyyyyyyy yyyyy yyyyyyy y 641122 641123 641124 641125 641126 641127 644888 644889 644890 644891 647075 647076 647078 647079 647107 647167 headers connectors matrix for .000015 [0.00038] gold plated part numbers *select contact plating to match header plating. 647626 647624 647534 1744047 647625 647627 647533 1744074 mta-100 connector/header mateability guide (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 1744163 647467 14 mta-100 .100 [2.54] material and finish housing ul94v-2 rated, nylon, see below for color; or ul94v-0 rated, nylon, black contacts phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold-plated over nickel closed end connectors .520 [13.21] .275 [6.99] .075 [1.91] .245 [6.22] .275 [6.99] .184 [4.67] .100 [2.54] typ. a .056 [1.42] without polarizing tabs with polarizing tabs .075 [1.91] .228 [5.80] .520 [13.21] .275 [6.99] .075 [1.91] .245 [6.22] .305 [7.75] .184 [4.67] .100 [2.54] typ. a .056 [1.42] without polarizing tabs with polarizing tabs .075 [1.91] .228 [5.80] feed-thru connectors color coding by wire size for ul94v-2 connectors 28 awg green 26 awg blue 24 awg white 22 awg red all wire sizes in ul94v-0 black for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 20 thru 30. notes: 1. refer to pages 70-74 for approved wire listing. 2. for strain reliefs and dust covers, see page 16. 3. for keying plugs, see page 17. 4. other circuit sizes are available upon request. minimums may apply. 5. connector circuits can be molded closed for keying purposes. minimums may apply. 6. where no part numbers appear in the chart, parts can be made available upon request. minimums may apply. 7. to determine connector overall length (dim. a), multiply .100 x the number of circuits. example: .100 x 10 circuits equals 1.000 inch [25.4 mm]. mta-100 idc connectorsclosed end and feed-thru mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 15 mta-100 .100 [2.54] connector ordering information the base part numbers chart at right shows the base part number, and their rohs (restrictions on certain hazardous substances) compliant (lead free) equivalent avail- able for the described con- nectors. prefixes and suffixes are determined by the number of circuit positions in the connector. for example, the complete part number for a 10-position closed end con- nector without polarizing tabs for 22 awg wire would be: base number 640440 plus prefix-and-suffix 4- -0 the correct ordering num- ber is 4-640440-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-640440-2 3 3-640440-3 4 3-640440-4 5 3-640440-5 6 3-640440-6 7 3-640440-7 8 3-640440-8 9 3-640440-9 10 4-640440-0 11 4-640440-1 12 4-640440-2 13 4-640440-3 14 4-640440-4 15 4-640440-5 16 4-640440-6 17 4-640440-7 18 4-640440-8 19 4-640440-9 20 5-640440-0 21 5-640440-1 22 5-640440-2 23 5-640440-3 24 5-640440-4 25 5-640440-5 26 5-640440-6 27 5-640440-7 28 5-640440-8 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. base part numbers closed end feed-thru without tabs with tabs without tabs with tabs connector type & wire size connector rohs connector rohs connector rohs connector rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-2, tin plated 22 awg 640440 32C58 643813 32C58 640620 32C58 644540 1 32C45 0.3C0.4 mm 2 24 awg 640441 32C58 643814 32C58 640621 32C58 644563 1 32C54 0.2 mm 2 26 awg 640442 32C58 643815 32C58 640622 32C58 644564 1 32C45 0.12C0.15 mm 2 28 awg 640443 32C58 643816 32C58 640623 32C58 644565 1 32C45 0.08C0.09 mm 2 tape mounted on reel ul94v-2, tin plated 22 awg 640468 32C58 644511 42C68 641311 32C58 0.3C0.4 mm 2 24 awg 640469 32C58 644512 32C58 641312 32C58 0.2 mm 2 26 awg 640470 32C58 644513 32C58 641313 32C58 0.12C0.15 mm 2 28 awg 640471 32C58 644514 32C58 641314 32C58 0.08C0.09 mm 2 standard ul94v-2, .000030 [0.00076] gold plated 22 awg 641237 32C58 644042 32C58 641241 32C58 644702 1 32C45 0.3C0.4 mm 2 24 awg 641238 32C58 644020 32C58 641242 32C58 0.2 mm 2 26 awg 641239 32C58 644043 1 32C44 641243 32C58 644726 1 32C45 0.12C0.15 mm 2 28 awg 641240 32C58 644044 1 32C44 641244 32C58 0.8C0.9 mm 2 standard ul94v-2, .000015 [0.00038] gold plated 22 awg 641190 32C58 644038 1 32C44 641198 32C58 647477 32C46 0.3C0.4 mm 2 24 awg 641191 32C58 1744020 1 32C44 641199 32C58 0.2 mm 2 26 awg 641192 32C58 644040 1 32C44 641200 32C58 647480 32C43 0.12C0.15 mm 2 28 awg 641193 32C58 641201 32C58 0.08C0.09 mm 2 led*, ul94v-2, tin plated (see note 1) 22 awg 641534 32C33 641653 32C33 0.3C0.4 mm 2 24 awg 641535 32C33 644795 32C33 641654 32C33 0.2 mm 2 26 awg 641536 32C33 641655 32C33 0.12C0.15 mm 2 28 awg 641537 32C33 641656 32C33 0.08C0.09 mm 2 standard ul94v-0, tin plated (gold is available, minimums may apply.) (black in color) 22 awg 643498 1 32C45 644083 1 32C45 644575 1 32C45 644578 1 32C45 0.3C0.4 mm 2 24 awg 644574 1 32C45 644312 1 32C45 644576 1 32C45 644579 1 32C45 0.2 mm 2 26 awg 643828 1 32C45 644313 1 32C45 644577 1 32C45 644497 1 32C45 0.12C0.15 mm 2 *led connectors are designed to mate with .014C.020 [0.36C0.51] diameter posts or square leads. 1 other circuit sizes are available upon request. minimums may apply. 2 tape mounted. note: blocked circuit configurations are available. contact product engineer or product manager for details. minimums may apply. mta-100 idc connectorsclosed end and feed-thru (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 16 mta-100 .100 [2.54] covers material (rohs compliant) strain relief cover ul94v-2 rated, nylon, white dust covers ul94v-0 rated, polyester, white closed end strain relief covers feed-thru strain relief covers closed end dust covers feed-thru dust covers .340 [8.64] .345 [8.76] .127 [3.23] note: this portion of the front locking bar may or may not be present. a a .130 [3.3] .105 [2.67] .360 [9.14] retention dimple .335 [8.51] .360 [9.14] note: this portion of the front locking bar may or may not be present. a .127 [3.23] a .130 [3.3] .245 [6.22] .395 [10.03] retention dimple cover ordering information the base part numbers chart at right shows the base part number and number of circuits available for the described cover. prefixes and suffixes are determined by the number of circuit positions in the cover. for example, the complete part number for a 10-position closed end strain relief cover would be: base number 643075 plus prefix-and-suffix 1- -0 the correct ordering num- ber is 1-643075-0 base part numbers closed end feed-thru strain relief dust strain relief dust covers covers covers covers cover no. of cover no. of cover no. of cover no. of part nos. circuits part nos. circuits part nos. circuits part nos. circuits 643075 2C28 640550 2C28 643077 2C28 640642 3-28 cover length no. of dim. prefix/ circuits a suffix 2 .200 -2 5.08 3 .300 -3 7.62 4 .400 -4 10.16 5 .500 -5 12.7 6 .600 -6 15.24 7 .700 -7 17.78 8 .800 -8 20.32 9 .900 -9 22.86 10 1.00 1- -0 25.4 11 1.100 1- -1 27.94 12 1.200 1- -2 30.48 13 1.300 1- -3 33.02 14 1.400 1- -4 35.56 15 1.500 1- -5 38.1 16 1.600 1- -6 40.64 17 1.700 1- -7 43.18 18 1.800 1- -8 45.72 19 1.900 1- -9 48.26 20 2.000 2- -0 50.8 21 2.100 2- -1 53.34 22 2.200 2- -2 55.88 no. of dim. prefix/ circuits a suffix no. of dim. prefix/ circuits a suffix no. of dim. prefix/ circuits a suffix 23 2.300 2- -3 58.42 24 2.400 2- -4 60.96 25 2.500 2- -5 63.5 26 2.600 2- -6 66.04 27 2.700 2- -7 68.58 28 2.800 2- -8 71.12 mta-100 idc connector accessories mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 17 mta-100 .100 [2.54] replacement idc contacts material and finish phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel note: tyco electronics does not rec- ommend terminating an mta contact more than one time. use replacement contacts when required for field repairs or wire changes. wire size part numbers awg mm 2 standard .000030 [0.00076] .000015 [0.00038] led tin plated gold plated gold plated tin plated 22 0.3C0.4 640636-3 641186-4 641186-3 641643-2 24 0.2 640637-3 641187-4 641187-3 641644-2 26 0.12C0.15 640638-3 641188-4 641188-3 641645-2 28 0.08C0.09 640639-2 641189-4 641189-3 641646-2 crimp snap-in contacts material and finish phosphor bronze, tin plated wire size part nos. awg mm 2 loose piece* strip** 26-22 0.12C0.4 640709-2 640708-2 **hand tool no. 59836-1 (is 408-6527) **applicator no. 466747-1 (is 408-8040) special applications for crimp snap-in contacts are: 1. double wire per contact 2. coax or shielded wire 3. mixed wire size in same connector note: only one crimp snap-in contact per connector. .125 [3.18] .038 [0.97] .077 [1.96] .065 [1.65] .300 [7.62] .500 [12.7] .027 [0.69] sq. ref. 1.800 [45.72] ref. 2 .452 [11.48] .075 [1.91] .070 [1.78] .070 [1.78] .142 [3.61] max. .425 [10.8] keying plug with carrier strip (10 plugs per strip) part no. 641994-1 material (rohs compliant) ul94v-2 rated, nylon, natural color note: removal of contact is not necessary when using keying plug. mta-100 idc connector accessories (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 18 mta-100 .100 [2.54] this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-100 posted connector and connector combination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not accept- able for mating. 640440 yyyyyyyy 640441 yyyyyyyy 640442 yyyyyyyy 640443 yyyyyyyy 640468 yyyyyyyy 640469 yyyyyyyy 640470 yyyyyyyy 640471 yyyyyyyy 640620 yyyyyyyy 640621 yyyyyyyy 640622 yyyyyyyy 640623 yyyyyyyy 641311 yyyyyyyy 641312 yyyyyyyy 641313 yyyyyyyy 641314 yyyyyyyy 641534 yyyyyyyy 641535 yyyyyyyy 641536 yyyyyyyy 641537 yyyyyyyy 641653 yyyyyyyy 641654 yyyyyyyy 641655 yyyyyyyy 641656 yyyyyyyy 643498 yyyyyyyy 643813 y* y* y* y* y* y* y* y* 643814 y* y* y* y* y* y* y* y* 643815 y* y* y* y* y* y* y* y* 643816 y* y* y* y* y* y* y* y* 643828 yyyyyyyy 644083 y* y* y* y* y* y* y* y* 644312 y* y* y* y* y* y* y* y* 644313 y* y* y* y* y* y* y* y* 644497 y* y* y* y* y* y* y* y* 644511 y* y* y* y* y* y* y* y* 644512 y* y* y* y* y* y* y* y* 644513 y* y* y* y* y* y* y* y* 644514 y* y* y* y* y* y* y* y* 644540 y* y* y* y* y* y* y* y* 644563 y* y* y* y* y* y* y* y* 644564 y* y* y* y* y* y* y* y* 644565 y* y* y* y* y* y* y* y* 644574 yyyyyyyy 644575 yyyyyyyy 644576 yyyyyyyy 644577 yyyyyyyy 644578 y* y* y* y* y* y* y* y* 644579 y* y* y* y* y* y* y* y* 644795 y* y* y* y* y* y* y* y* 1375820 nnnnnnnn 647000 647001 647002 647003 647004 647005 647006 647007 posted connectors connectors matrix for tin plated part numbers *2 & 3 position mta-100 posted connectors can not mate with mta-100 connectors with polarizing tabs. mta-100 posted connector/connector mateability guide mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 19 mta-100 .100 [2.54] 641237 yyyyyyyy 641238 yyyyyyyy 641239 yyyyyyyy 641240 yyyyyyyy 641241 yyyyyyyy 641242 yyyyyyyy 641243 yyyyyyyy 641244 yyyyyyyy 644020 y* y* y* y* y* y* y* y* 644042 y* y* y* y* y* y* y* y* 644043 y* y* y* y* y* y* y* y* 644044 y* y* y* y* y* y* y* y* 644702 y* y* y* y* y* y* y* y* 644726 y* y* y* y* y* y* y* y* 1375820 nnnnnnnn 647008 647009 647010 647011 647012 647013 647014 647015 posted connectors connectors this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-100 posted connector and connector combination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not accept- able for mating. matrix for .000030 [0.00076] gold plated part numbers 641190 yyyyyyyy 641191 yyyyyyyy 641192 yyyyyyyy 641193 yyyyyyyy 641198 yyyyyyyy 641199 yyyyyyyy 641200 yyyyyyyy 641201 yyyyyyyy 644038 y* y* y* y* y* y* y* y* 644040 y* y* y* y* y* y* y* y* 647477 y* y* y* y* y* y* y* y* 647480 y* y* y* y* y* y* y* y* 1375820 nnnnnnnn 1744020 y* y* y* y* y* y* y* y* 647008 647009 647010 647011 647012 647013 647014 647015 posted connectors connectors matrix for .000015 [0.00038] gold plated part numbers *2 & 3 position mta-100 posted connectors can not mate with mta-100 connectors with polarizing tabs. *2 & 3 position mta-100 posted connectors can not mate with mta-100 connectors with polarizing tabs. mta-100 posted connector/connector mateability guide (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 base part numbers connector type closed end connector feed-thru connector & wire size part nos. rohs equiv. part nos. no. of circuits standard ul 94v-2, tin plated 22 awg 647000 647004 2 0.3C0.4 mm 2 32C49 1 24 awg 647001 32C49 1 647005 2 0.2 mm 2 26 awg 647002 32C49 1 647006 2 0.12C0.15 mm 2 28 awg 647003 32C49 1 647007 2 0.08C0.09 mm 2 standard ul 94v-2, .000030 [0.00076] gold plated 22 awg 647008 32C49 1 647012 2 0.3C0.4 mm 2 24 awg 647009 32C49 1 647013 2 0.2 mm 2 26 awg 647010 32C49 1 647014 2 0.12C0.15 mm 2 28 awg 647011 32C49 1 647015 2 0.08C0.09 mm 2 standard ul 94v-2, .000015 [0.00038] gold plated 22 awg 647016 32C49 1 647020 2 0.3C0.4 mm 2 24 awg 647017 32C49 1 647021 2 0.2 mm 2 26 awg 647018 32C49 1 647022 2 0.12C0.15 mm 2 28 awg 647019 32C49 1 647023 2 0.08C0.09 mm 2 1 2 and 3 position mta-100 posted connectors (closed end) can not mate with mta-100 connectors with polarizing tabs. 2 parts may be manufactured upon request. minimums may apply. contact product engineer or product manager for details. 20 mta-100 .100 [2.54] material and finish housing ul 94v-2 rated, nylon, see chart for color contacts copper alloy, post tin or gold plated over nickel (see chart) notes: 1. mating half visuals - pages 14 & 15. 2. use feed thru strain relief covers & feed thru dust covers (if needed) - page 16. 3. approved wire listing - pages 70 thru 74. closed end feed-thru connector ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are determined by the number of circuit positions in the connec- tor. for example, the complete part number for a 12-position closed end connector for 22 awg wire would be: base number 647000 plus prefix-and-suffix 4- -2 the correct ordering number is 4-647000-2 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-647000-2 thru 19 4-647000-9 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part numbers may not be available upon catalog release. if the number you need is not available, please contact product engineering to expedite your request. color coding by wire size for ul 94v-2 connectors 22 awg red 24 awg white 26 awg blue 28 awg green performance data voltage rating 250 vac current rating 4 amp max. low-level resistance 16 m ? max. initial dielectric withstanding voltage 750 vac/1 min. insulation resistance 5000 m ? min. initial operating temperature C55c to +105c technical documents product specification 108-1050-1 mta-100 posted connector application specification 114-1019 mta-100 connectors replacement idc contacts material and finish contacts copper alloy, post tin or gold plated over nickel no. of dim. circuits ab 2 .300 .227 [7.62] [5.77] 3 .400 .327 [10.16] [8.31] 4 .500 .427 [12.70] [10.85] 5 .600 .527 [15.24] [13.39] no. of dim. circuits ab 6 .700 .627 [17.78] [15.93] 7 .800 .727 [20.32] [18.47] 8 .900 .827 [22.86] [21.01] 9 1.000 .927 [25.40] [23.55] no. of dim. circuits ab 10 1.100 1.027 [27.94] [26.09] 11 1.200 1.127 [30.48] [28.63] 12 1.300 1.227 [33.02] [31.17] 13 1.400 1.327 [35.56] [33.71] no. of dim. circuits ab 14 1.500 1.427 [38.10] [36.25] 15 1.600 1.527 [40.64] [38.79] 16 1.700 1.627 [43.18] [41.33] 17 1.800 1.727 [45.72] [43.87] 18 1.900 1.827 [48.26] [46.41] 19 2.000 1.927 [50.80] [48.95] part numbers wire size tin .000030 awg mm 2 plated [.00076] gold plated 22 0.3C0.4 3-647030-1 3-647030-2 24 0.2 3-647031-1 3-647031-2 26 0.12C0.15 3-647032-1 3-647032-2 28 0.8C0.9 3-647033-1 3-647033-2 .843 [21.40] b dim. .303 [7.70] .079 [2.00] .415 [10.54] .025 [0.54] sq. .100 [2.54] typ. a dim. .843 [21.40] b dim. .303 [7.70] .079 [2.00] .415 [10.54] .025 [0.54] sq. .100 [2.54] ty p. a dim. .083 [2.10] .770 [19.55] .075 [1.91] .025 [0.64] mta-100 idc posted connectors (wire-to-wire)closed end, feed-thru mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 21 mta-100 .100 [2.54] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts would be: base number 641211 plus prefix-and-suffix 4- -0 the correct ordering number is 4-641211-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-641211C2 thru 28 5-641211-8 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. straight post (.025 [0.64] square) .200 [5.08] a .025 [0.64] sq. .100 [2.54] typ. .050 [1.27] typ. post no. 1 .295 [7.49] .100 [2.54] .140 [3.56] ref. .535 [13.59] .200 [5.08] a .100 [2.54] .025 [0.64] sq. .050 [1.27] typ. .100 [2.54] typ. .140 [3.56] ref. .295 [7.49] .062 [1.57] post no. 1 recommended mounting hole pattern for .062 [1.57] thk. pc board recommended mounting hole pattern for .062 [1.57] thk. pc board x = .120 [3.05] min., .240 [6.1] max. when mated with mta-100 connector. x = .120 [3.05] min., when mated with cst-100 ii connector. right-angle post (.025 [0.64] square) base part numbers straight posts right-angle posts header no. of posts/ header no. of posts/ part nos. rohs equiv. part nos. rohs equiv. standard ul94v-0, tin plated 640452 2C28 640453 2C28 standard ul94v-0, .000030 [0.00076] gold plated 641211 2C28 641212 2C28 32C58 32C58 standard ul94v-0, .000015 [0.00038] gold plated 641122 2C28 641123 2C28 32C58 32C58 .100 [2.54] typ. .050/.040 [1.27/1.02] edge of board .120 [3.05] min. dia. .100 [2.54] typ. .050/.040 [1.27/1.02] edge of board x dia. note: consult product drawing for details on placing headers onto pc boards. mta-100 flat headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 22 mta-100 .100 [2.54] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. headers without retentive legs are suitable for breakaway application. 3. 2 or 3 retentive leg(s) per header, depending upon number of positions. 4. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 5. to determine header overall length (dim. a) multiply .100 x the number of posts minus (C) .012. example: .100 x 10 posts C .012 = .988 inches [25.1 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. connector ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts and without retentive legs would be: base number 644456 plus prefix-and-suffix 4- -0 the correct ordering number is 4-644456-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-644456-2 thru 28 5-644456-8 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. .044 [1.12] typ. .100 [2.54] .100 [2.54] typ. a .092 [2.34] .150 [3.81] .260 [6.6] .110 [2.79] ref. .025 [0.64] sq. post no. 1 straight post (.025 [0.64] square) right-angle post (.025 [0.64] square) straight and right-angle post with retentive legs .044 [1.12] typ. .100 [2.54] post no. 1 .100 [2.54] typ. .295 [7.49] .505 [12.83] .110 [2.79] ref. a .092 [2.34] .025 [0.64] sq. recommended mounting hole pattern for .062 [1.57] thk. pc board recommended mounting hole pattern for .062 [1.57] thk. pc board .110 [2.79] ref. .0335 [0.85] base part numbers straight posts right-angle posts without with without with retentive legs retentive legs retentive legs retentive legs header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 644456 32C58 644695 32C58 644457 32C58 644694 32C58 standard ul94v-0, .000030 [0.00076] gold plated 644884 2C28 644886 2C28 644885 2C28 644887 2C28 standard ul94v-0, .000015 [0.00038] gold plated 644888 2C28 644890 2C28 644889 2C28 644891 2C28 .100 [2.54] typ. .050/.040 [1.27/1.02] edge of board .060 [1.52] min. dia. for straight leg headers dia. for retentive leg headers .037 [0.94 ] .002 0.05 .100 [2.54] typ. edge of board .060 [1.52] min. .050/.040 [1.27/1.02] dia. for straight leg headers dia. for retentive leg headers .037 [0.94 ] .002 0.05 note: consult product drawing for details on placing headers onto pc boards. mta-100 narrow flat headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 high temperature product available. please contact sales engineer or product information center. 23 mta-100 .100 [2.54] .125 [3.18] a .025 [0.64] sq. .100 [2.54] typ. .050 [1.27] typ. post no. 1 .295 [7.49] .100 [2.54] .535 [13.59] .290 [7.37] .035 [0.89] min. .140 [3.56] ref. .225 [5.72] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. all posts on retentive leg headers are bent. 4. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts would be: base number 641213 plus prefix-and-suffix 4- -0 the correct ordering number is 4-641213-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-641213-2 thru 28 5-641213-8 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. straight post (.025 [0.64] square) right-angle post (.025 [0.64] square) .125 [3.18] a .025 [0.64] sq. .100 [2.54] typ. .050 [1.27] typ. post no. 1 .295 [7.49] .290 [7.37] .100 [2.54] .140 [3.56] .140 [3.56] max. .035 [0.89] min. .225 [5.72] recommended mounting hole pattern for .062 [1.57] thk. pc board recommended mounting hole pattern for .062 [1.57] thk. pc board base part numbers straight posts right-angle posts without with without with retentive legs retentive legs retentive legs retentive legs header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 640454 2C28 644876 2C28 640455 2C28 644877 2C28 standard ul94v-0, .000030 [0.00076] gold plated 641213 32C58 641214 32C58 standard ul94v-0, .000015 [0.00038] gold plated 641124 32C58 641125 32C58 .100 [2.54] typ. edge of board .130 [3.30] min. .050/.040 [1.27/1.02] dia. for straight leg headers dia. for retentive leg headers .037 [0.94 ] .002 0.05 .100 [2.54] typ. edge of board x .050/.040 [1.27/1.02] dia. for straight leg headers dia. for retentive leg headers .037 [0.94 ] .002 0.05 .125 [3.18] ref. 34 .135 [3.43] ref. 34 retentive leg retentive leg x = .110 [2.79] min., .160 [4.06] max. when mated with mta-100 connector. x = .110 [2.79] min., .120 [3.05] max. when mated with cst-100 ii connector. note: consult product drawing for details on placing headers onto pc boards. mta-100 polarized headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 24 mta-100 .100 [2.54] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. all posts on retentive leg headers are bent. 4. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts would be: base number 641215 plus prefix-and-suffix 4- -0 the correct ordering number is 4-641215-0 all part numbers are the rohs equivalent version. example: no. of standard lead free pos. prefix/suffix rohs prefix/suffix 2 641215-2 3-641215-2 thru 28 2-641215-8 5-641215-8 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. straight post (.025 [0.64] square) right-angle post (.025 [0.64] square) .050 [1.27] typ. post no. 1 .295 [7.49] .100 [2.54] .140 [3.56] ref. .535 [13.59] .310 [7.87] .125 [3.18] a .100 [2.54] typ. .040 [1.02] max. .025 [0.64] sq. .225 [5.72] .125 [3.18] a .025 [0.64] sq. .100 [2.54] typ. .050 [1.27] typ. .295 [7.49] .310 [7.87] .100 [2.54] .140 [3.56] max. .140 [3.56] .040 [1.02] max. .225 [5.72] post no. 1 base part numbers straight posts right-angle posts without with without with retentive legs retentive legs retentive legs retentive legs header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 640456 2C28 644874 2C28 640457 2C28 644875 2C28 standard ul94v-0, .000030 [0.00076] gold plated 641215 32C58 641216 32C58 standard ul94v-0, .000015 [0.00038] gold plated 641126 32C58 641127 32C58 .125 [3.18] ref. 34 .135 [3.43] 34 retentive leg retentive leg recommended mounting hole pattern for .062 [1.57] thk. pc board recommended mounting hole pattern for .062 [1.57] thk. pc board .100 [2.54] typ. edge of board .130 [3.30] min. .050/.040 [1.27/1.02] dia. for straight leg headers dia. for retentive leg headers .037 [0.94 ] .002 0.05 .100 [2.54] typ. edge of board x .050/.040 [1.27/1.02] dia. for straight leg headers dia. for retentive leg headers .037 [0.94 ] .002 0.05 x = .110 [2.79] min., .160 [4.06] max. when mated with mta-100 connector. x = .110 [2.79] min., .120 [3.05] max. when mated with cst-100 ii connector. note: consult product drawing for details on placing headers onto pc boards. mta-100 friction lock headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 25 mta-100 .100 [2.54] page_head (continued) material and finish housing ul94v-0 rated, thermo- plastic, black posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts would be: base number 647609 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647609-0 all part numbers are the rohs equivalent version. example: no. of standard lead free pos. prefix/suffix rohs prefix/suffix 2 647609-2 3-647609-2 3 647609-3 3-647609-3 4 647609-4 3-647609-4 5 647609-5 3-647609-5 6 647609-6 3-647609-6 7 647609-7 3-647609-7 8 647609-8 3-647609-8 9 647609-9 3-647609-9 10 1-647609-0 4-647609-0 11 1-647609-1 4-647609-1 12 1-647609-2 4-647609-2 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. friction lock polarized recommended mounting hole pattern for .062 [1.57] thk. pc board .070 [1.78] min. ? .052 .002 [1.32 0.05 ] .100 [2.54] .090 [2.29] ? .040 .003 [1.02 0.07 ] typ. .025 .001 [0.64 0.03 ] square typ . .113 [2.87] a .250 [6.35] .025-.040 [0.64-1.01] .070 [1.78] .135 [3.43] .290 .010 [7.37 0.25 ] .347 .010 [8.81 0.25 ] .550 .010 [13.97 0.25 ] .125 [3.18] .050 [1.27] .100 [2.54] typ. post no . 1 .025 .001 [0.64 0.03 ] square typ. .113 [2.87] a .250 [6.35] .055 [1.39] .055 [1.40] .070 [1.78] .135 [3.43] .290 .010 [7.37 0.25 ] .347 .010 [8.81 0.25 ] .550 .010 [13.97 0.25 ] .125 [3.18] .050 [1.27] typ. .100 [2.54] post no. 1 min. note: consult product drawing for details on placing headers onto pc boards. base part numbers friction lock polarized header rohs header rohs part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647609 32-42 647623 32-42 standard ul94v-0, .000030 [0.00076] gold plated 647626 32-42 647624 32-42 standard ul94v-0, .000015 [0.00038] gold plated 647627 32-42 647625 32-42 note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-100 headers with retention pegstraight mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 26 mta-100 .100 [2.54] material and finish housing ul94v-0 rated, thermo- plastic, black posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. 4. this product can be mounted in the middle of the pc board as shown in the pcb layout. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with right-angle posts would be: base number 647630 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647630-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-647630-2 3 3-647630-3 4 3-647630-4 5 3-647630-5 6 3-647630-6 7 3-647630-7 8 3-647630-8 9 3-647630-9 10 4-647630-0 11 4-647630-1 12 4-647630-2 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. .250 [6.35] .113 [2.87] a .025 [0.64] sq. .050 [1.27] .100 [2.54] .347 [8.81] .290 [7.37] .112 [2.84] .040 [1.02] max. .125 [3.18] post no. 1 .113 [2.87] .025 [0.64] sq. .100 [2.54] .050 [1.27] post no. 1 .290 [7.37] .125 [3.18] .070 [1.78] .112 [2.84] .250 [6.35] .347 [8.81] .140 [3.56] a recommended mounting hole pattern for .062 [1.57] thk. pc board .100 [2.54] typ. .040 .003 [1.02 0.07 ] dia. note: consult product drawing for details on placing headers onto pc boards. base part numbers friction lock polarized right-angle posts right-angle posts header rohs header rohs part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647630 32-42 647651 32-42 standard ul94v-0, .000030 [0.00076] gold plated 647629 32-42 647653 32-42 standard ul94v-0, .000015 [0.00038] gold plated 647628 32-42 647652 32-42 friction lock right-angle post (.025 [0.64] square) polarized right-angle post (.025 [0.64] square) note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-100 high profile headersright-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 27 mta-100 .100 [2.54] page_head (continued) material and finish housing 2C12 position ul94v-0 rated, nylon, black 13C18 position ul94v-0 rated, lcp, black posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts would be: base number 647047 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647047-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-647047-2 thru 12 4-647047-2 13 na thru 18 na see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. straight post (.025 [0.64] square) .113 [2.87] a .025 [0.64] sq. .100 [2.54] .050 [1.27] post no. 1 .290 [7.37] .135 [3.43] .550 [13.97] .070 [1.78] .125 [3.18] .250 [6.35] .347 [8.81] right-angle post (.025 [0.64] square) .113 [2.87] .025 [0.64] sq. .100 [2.54] .050 [1.27] post no. 1 .290 [7.37] .125 [3.18] .070 [1.78] .112 [2.84] .250 [6.35] .347 [8.81] .140 [3.56] a recommended mounting hole pattern for .062 [1.57] thick pc board .300 [7.62] .150 [3.81] .100 [2.54] typ. .040 [1.02] pre-tinned plated thru hole typ. .060 [1.52] pre-tinned land both sides typ. .008 [0.20] min. thk. solder paste in area shown .065 [1.65] .0325 [0.826] post no. 1 for use with infrared reflow process maximum temperature rating: 2C12 position: 280c 13C18 position: 235c note: consult product drawing for details on placing headers onto pc boards. base part numbers straight posts straight posts (tube loaded) right-angle posts header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647047 32C42 647298 32C42 647048 32C42 standard ul94v-0, .000030 [0.00076] gold plated 647109 32C42 647300 32C42 647114 32C42 standard ul94v-0, .000015 [0.00038] gold plated 647075 32C42 647299 32C42 647076 32C42 note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-100 polarized high temperature headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 28 mta-100 .100 [2.54] material and finish housing 2C12 position ul94v-0 rated, nylon, black 13C18 position ul94v-0 rated, lcp, black posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts would be: base number 647050 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647050-0 all part numbers are the rohs equivalent version. example: no. of standard lead free pos. prefix/suffix rohs prefix/suffix 2 647050-2 3-647050-2 thru 12 1-647050-2 4-647050-2 13 1-647050-3 na thru 18 1-647050-8 na see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. straight post (.025 [0.64] square) right-angle post (.025 [0.64] square) base part numbers straight posts straight posts (tube loaded) right-angle posts header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647050 32-42 647295 32-42 647051 32-42 standard ul94v-0, .000030 [0.00076] gold plated 647116 32-42 647297 32-42 647117 32-42 standard ul94v-0, .000015 [0.00038] gold plated 647078 32-42 647296 32-42 647079 32-42 recommended mounting hole pattern for .062 [1.57] thick pc board .300 [7.62] .150 [3.81] .100 [2.54] typ. .040 [1.02] pre-tinned plated thru hole typ. .060 [1.52] pre-tinned land both sides typ. .008 [0.20] min. thk. solder paste in area shown .065 [1.65] .0325 [0.826] post no. 1 .250 [6.35] .113 [2.87] a .025 [0.64] sq. .050 [1.27] .100 [2.54] .130 [3.30] .550 [13.97] .347 [8.81] .290 [7.37] .040 [1.02] max. .125 [3.18] post no. 1 .250 [6.35] .113 [2.87] a .025 [0.64] sq. .050 [1.27] .100 [2.54] .347 [8.81] .290 [7.37] .112 [2.84] .040 [1.02] max. .125 [3.18] post no. 1 for use with infrared reflow process maximum temperature rating: 2C12 position: 280c 13C18 position: 235c note: consult product drawing for details on placing headers onto pc boards. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-100 friction lock high temperature headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 29 mta-100 .100 [2.54] material and finish housing 2C12 position ul94v-0 rated, nylon, black 13C18 position ul94v-0 rated, lcp, black posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. to determine header overall length (dim. a) multiply .100 x the number of posts. example: .100 x 10 posts equals 1.000 inch [25.4 mm]. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14, 15 and 31. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position sur- face mount polarized header would be: base number 647106 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647106-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-647106-2 12 4-647106-2 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. polarized header friction lock header recommended pc board layout for use with .010 [0.25] thick stencil .250 [6.35] .318 [8.08] ref. .113 [2.87] .025 [0.64] sq. .050 [1.27] .100 [2.54] .347 [8.81] .290 [7.37] .070 [1.78] .125 [3.18] .159 [4.04] typ. post no. 1 .250 [6.35] .318 [8.08] ref. .113 [2.87] .025 [0.64] sq. .050 [1.27] .100 [2.54] .347 [8.81] .290 [7.37] .040 [1.02] max. .125 [3.18] .159 [4.04] post no. 1 .235 [5.97] .100 [2.54] typ. .060 [1.52] .070 [1.78] post no. 1 note: consult product drawing for details on placing headers onto pc boards. for use with infrared reflow process maximum temperature rating: 2C12 position: 280c 13C18 position: 235c base part numbers polarized headers friction lock headers header rohs header rohs part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647106 32-42 647166 32-42 standard ul94v-0, .000030 [0.00076] gold plated 647108 32-42 647168 32-42 standard ul94v-0, .000015 [0.00038] gold plated 647107 32-42 647167 32-42 note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-100 polarized and friction lock surface mount headersstraight mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 tape mount part numbers polarized headers friction lock headers header rohs header rohs part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647531 32-42 647502 32-42 standard ul94v-0, .000030 [0.00076] gold plated 1744163 32-42 standard ul94v-0, .000015 [0.00038] gold plated 647467 32-42 30 mta-100 .100 [2.54] straight post (.025 [0.64] square) right-angle (.025 [0.64] square) material and finish housing ul94v-0 rated, polyester, black posts copper alloy, tin plated; or .000030 [0.00076] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. headers with .000015 [0.00038] gold plated post are available upon request. minimums may apply. 3. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 14 and 15. header ordering information the base part numbers chart at right shows the base part number. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts and with pegs would be: base number 644486 plus prefix-and-suffix 4- -0 the correct ordering number is 4-644486-0 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. notes: 1. select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. 2. mta-100 shrouded headers do not mate with cst-100 ii hous- ings. a .025 [0.64] typ. .100 [2.54] .092 [2.34] typ. ref. post no. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] ref. .107 [2.72] ref. .125 [3.18] .200 [5.08] .440 [11.18] recommended mounting hole pattern for .062 [1.57] thk. pc board (solder side of board shown) polarized retention peg .042 [1.07] .100 [2.54] typ. .081/.075 [2.06/1.91] .124 [3.15] edge of board .125 [3.18] min. .050/.040 [1.27/1.02] dia. dia. a .025 [0.64] typ. .100 [2.54] .092 [2.34] typ. ref. post no. 1 .313 [7.95] .410 [10.41] .176 [4.47] ref. .130 [3.30] .200 [5.08] .050 [1.27] max. .137 [3.48] ref. .100 [2.54] typ. edge of board .300 [7.62] max. .050/.040 [1.27/1.02] dia. recommended mounting hole pattern for .062 [1.57] thk. pc board (solder side of board shown) header length no. of dim. prefix/ circuits a suffix 2 .284 3- -2 7.21 3 .384 3- -3 9.75 4 .484 3- -4 12.29 5 .584 3- -5 14.83 6 .684 3- -6 17.37 7 .784 3- -7 19.91 8 .884 3- -8 22.45 9 .984 3- -9 24.99 no. of dim. prefix/ circuits a suffix 10 1.084 4- -0 27.53 11 1.184 4- -1 30.07 12 1.284 4- -2 32.61 13 1.384 4- -3 35.15 no. of dim. prefix/ circuits a suffix 14 1.484 4- -4 37.69 no. of dim. prefix/ circuits a suffix .206 [5.23] ref. .130 [3.30] ref. rear bend front bend note: consult product drawing for details on placing headers onto pc boards. base part numbers straight posts right-angle posts with without without pegs only pegs pegs front bend rear bend header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 644486 22-34 644861 22-34 644488 22-34 644803 22-34 standard ul94v-0, .000030 [0.00076] gold plated 644487 22-34 644489 22-34 mta-100 shrouded headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 31 cst-100 ii .100 [2.54] product facts low cost wire-to-board interconnections wide wire range for single contact tin and gold plated contacts mates with specified mta and similar competitive notched headers plastic latching feature in housing helps prevent con- tact backout locking ramps and polariz- ing tabs are standard for keying purposes use keying plug 641994-1 (page 17) recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 for mateability options, see matrix on pages 12 and 13. for mating half visuals, see pages 21 thru 29 and 32. see page 15 for an explanation of rohs lead free equivalents. ? .260 [6.60] ref. .510 [12.95] .190 [4.83] a .100 [2.54] typ. .060 [1.52] typ. performance data voltage rating 250 vac current rating 4 amp max. low-level resistance 6 m max. initial; 10 m max. final insulation resistance 1000 m min. initial; 100 m min. final operating temperature 55 c to 105 c technical documents product specification 108-1948 application specification 114-13036 instruction sheet 408-8493 no. of dim. part pos. a numbers 2 .220 1375820-2 5.59 3 .320 1375820-3 8.13 4 .420 1375820-4 10.67 5 .520 1375820-5 13.21 6 .620 1375820-6 15.75 7 .720 1375820-7 18.29 8 .820 1375820-8 20.83 9 .920 1375820-9 23.37 10 1.020 1-1375820-0 25.91 11 1.120 1-1375820-1 28.45 12 1.220 1-1375820-2 30.99 13 1.320 1-1375820-3 33.53 14 1.420 1-1375820-4 36.07 15 1.520 1-1375820-5 38.61 no. of dim. part pos. a numbers 16 1.620 1-1375820-6 41.15 17 1.720 1-1375820-7 43.69 18 1.820 1-1375820-8 46.23 19 1.920 1-1375820-9 48.77 20 2.020 2-1375820-0 51.31 21 2.120 2-1375820-1 53.85 22 2.220 2-1375820-2 56.39 23 2.320 2-1375820-3 58.93 24 2.420 2-1375820-4 61.47 25 2.520 2-1375820-5 64.01 26 2.620 2-1375820-6 66.55 27 2.720 2-1375820-7 69.09 28 2.820 2-1375820-8 71.63 application tooling loose piece contacts hand tool no. 58517-3 (408-4064) strip contacts amp-o-lectric model g termination machine* applicator no. 567373-3 (request catalog 65828) amp-o-matic stripper-crimper machine* applicator no. 567910-1 or 567827-1 (with cqm) (request catalog 65004) ampomator cls iiig lead making machine* (request catalog 82659) *requires applicators. for part numbers, call technical support. contacts part numbers tin plated 15 au gold plated 30 au gold plated 1375819-1 (strip) 1375819-2 (strip) 1375819-3 (strip) 1445336-1 (loose piece) 1445336-2 (loose piece) 1445336-3 (loose piece) material and finish (rohs compliant) phosphor bronze, pretinned or .000015 [.00038] gold, over nickel .000030 [0.00076] gold over nickel wire range 22C26 awg [0.35C0.13 mm 2 ] max. ins. dia. .065 [1.65] housing* material (rohs compliant) ul94v-0 rated, nylon, white .195 [4.95] .440 [11.17] .016.002 [.406.051] *housings without polarizing tabs may be manufactured upon request. minimums may apply. contact product engineering or product manager for details. .100 [2.54] centerline cst-100 ii crimp contacts and housings mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 base part numbers straight posts with without right-angle posts pegs pegs without pegs only header no. of header no. of header no. of part nos. posts/ part nos. posts/ part nos. posts/ rohs equiv. rohs equiv. rohs equiv. standard ul94v-0, tin plated 644893 32-44 644892 32-44 644894 32-44 standard ul94v-0, .000030 [0.00076] gold plated 644897 32-44 644896 32-44 644898 32-44 32 cst-100 ii .100 [2.54] straight post (.025 [0.64] square) right-angle (.025 [0.64] square) material and finish housing ul94v-0 rated, polyester, black posts copper alloy, tin plated; or .000030 [0.00076] gold over nickel a .025 [0.64] typ. .100 [2.54] .092 [2.34] ref. post no. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] ref. .107 [2.72] ref. .125 [3.18] .280 [7.11] .520 [13.21] recommended mounting hole pattern for .062 [1.57] thk. pc board (solder side of board shown) .042 [1.07] .100 [2.54] typ. .081/.075 [2.06/1.91] .124 [3.15] edge of board .125 [3.18] min. .050/.040 [1.27/1.02] dia. dia. notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. headers with .000015 [0.00038] gold plated posts are available upon request. minimums may apply. 3. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. for mateability options, see matrix on pages 12 and 13. for mating half visuals, see page 31. a .025 [0.64] typ. .100 [2.54] .036 [0.91] max. .092 [2.34] typ. post no. 1 .313 [7.95] .176 [4.47] ref. .107 [2.72] ref. .140 [3.56] .280 [7.11] .100 [2.54] typ. edge of board .450 [11.43] max. .050/.040 [1.27/1.02] dia. recommended mounting hole pattern for .062 [1.57] thk. pc board (solder side of board shown) header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight posts and with pegs would be: base number 644893 plus prefix-and-suffix 4- -0 the correct ordering number is 4-644893-0 all part numbers are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-644893-2 thru 14 4-644893-4 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: cst-100 ii shrouded headers only mate with cst-100 ii housings. all the mta-100 headers except the mta-100 shrouded headers mate with cst-100 ii housings. header length no. of dim. prefix/ circuits a suffix 2 .284 3- -2 7.21 3 .384 3- -3 9.75 4 .484 3- -4 12.29 5 .584 3- -5 14.83 6 .684 3- -6 17.37 7 .784 3- -7 19.91 no. of dim. prefix/ circuits a suffix 8 .884 3- -8 22.45 9 .984 3- -9 24.99 10 1.084 4- -0 27.53 no. of dim. prefix/ circuits a suffix note: consult product drawing for details on placing headers onto pc boards. polarized retention peg cst-100 ii shrouded headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 33 mta-156 .156 [3.96] product facts connectors and headers for 2 through 24 positions; wire sizes of 18, 20, 22, 24 and 26 awg [0 .9C 0.12 mm 2 ] connectors and headers, except shrouded headers, are end-to-end stackable quad connectors for higher current rating (page 54) posted connectors for 2, 3, 4, 6, 9,12,15 and 24 posi- tions card edge connectors for 3, 6, 9,12,15,18 and 20 through 24 positions connectors preloaded with idc contacts all contacts are slotted for insulation displacement (idc) termination technique connector styles include both closed end and feed- thru, with and without lock- ing ramps and polarizing tabs molded ribs on housing do not allow reverse mating contacts are lubricated for fretting corrosion protection benefits derived from the mta-156 system include increases quality and ease of handling such a s one-step assembly no wire stripping no contact damage reduced wiring errors simpler tooling simple maintenance and repair meets the material require- ments of table 23.1 of ul 1410 standards for television receiver and video products (wire-to- post connectors only) recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 r r mta-156 connectors accept discrete and ribbon cable wire sizes ranging from 18 C 26 awg [0.9C 0.12 mm 2 ] with maxi- mum insulation outside diameter.095 [2.41] for sin- gle wire and .070 [1.78] for mass termination of wires. tin plated solid, fused stranded or stranded (7, 16, and 19 strands) wire with pvc insulation can be used on 18 awg [0.8 C 0.9 mm 2 ] mta-156 connectors; 7, 10, and 19 stranded wire on 20 awg [0.5 C 0.6 mm 2 ] mta-156 connectors; and 7 and 19 stranded wire on 22 C 26 awg [0.4 C 0. 12 mm 2 ] mta-156 connectors. only one wire to be termi- nated into an idc contact slot. mass termination of wire provides the lowest applied cost because it drastically reduces the labor content of virtually any cable or har- ness assembly required. technical documents product specification 108-1051 mta-156 connectors application specifications 114-1020 mta-156 connectors, posted connectors and card edge connectors 114-1032 mta-156 ribbon cable assembly note: refer to page 70 for approved wire listings. performance data* voltage rating 600 vac current rating 7 amp max. for mta-156 connector low-level resistance 3.0 m max. initial dielectric withstanding voltage 2200 vac/1 min. insulation resistance 5000 m min. initial operating temperature 55 c to 105 c *refer to the product specification for additional electrical, mechanical and environmental performance tests and requirements. the wire-to-post connector housing material is flame retardant thermoplastic, either ul94v-2 or ul94v-0 rated. a full line of .156 [3.96] centerline headers com- pletes the system. headers are available with straight or right-angle posts, in flat friction lock and shrouded styles. headers are available in 2 through 24 positions. .156 [3.96] centerline mta-156 idc connectors and headers mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 34 mta-156 .156 [3.96] mta-156 connector/ header mateability guide matrix for tin plated part numbers this matrix has been prepared to assist you, our customer, in defin- ing the correct mating halves for the mta-156 header and connector combination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not acceptable for mating. headers connectors 640426 yyynyyyyyynyyyyyy 640427 yyynyyyyyynyyyyyy 640428 yyynyyyyyynyyyyyy 640429 yyynyyyyyynyyyyyy 640430 yyynyyyyyynyyyyyy 640431 yyyyyyyyyyyyyyyyy 640432 yyyyyyyyyyyyyyyyy 640433 yyyyyyyyyyyyyyyyy 640434 yyyyyyyyyyyyyyyyy 640435 yyyyyyyyyyyyyyyyy 640472 yyynyyyyyynyyyyyy 640473 yyynyyyyyynyyyyyy 640474 yyynyyyyyynyyyyyy 640475 yyynyyyyyynyyyyyy 640476 yyynyyyyyynyyyyyy 640477 yyyyyyyyyyyyyyyyy 640478 yyyyyyyyyyyyyyyyy 640479 yyyyyyyyyyyyyyyyy 640480 yyyyyyyyyyyyyyyyy 640481 yyyyyyyyyyyyyyyyy 640595 yyynyyyyyynyyyyyy 640599 yyynyyyyyynyyyyyy 640600 yyynyyyyyynyyyyyy 640601 yyynyyyyyynyyyyyy 640602 yyynyyyyyynyyyyyy 640604 yyyyyyyyyyyyyyyyy 640605 yyyyyyyyyyyyyyyyy 640606 yyyyyyyyyyyyyyyyy 640607 yyyyyyyyyyyyyyyyy 640608 yyyyyyyyyyyyyyyyy 641301 yyynyyyyyynyyyyyy 641302 yyynyyyyyynyyyyyy 641303 yyynyyyyyynyyyyyy 641304 yyynyyyyyynyyyyyy 641305 yyynyyyyyynyyyyyy 641306 yyyyyyyyyyyyyyyyy 641307 yyyyyyyyyyyyyyyyy 641308 yyyyyyyyyyyyyyyyy 641309 yyyyyyyyyyyyyyyyy 641310 yyyyyyyyyyyyyyyyy 643817 yyynyyyyyynyyyyyy 643818 yyynyyyyyynyyyyyy 643819 yyynyyyyyynyyyyyy 643820 yyynyyyyyynyyyyyy 643821 yyynyyyyyynyyyyyy 644082 yyyyyyyyyyyyyyyyy 644461 yyyyyyyyyyyyyyyyy 644462 yyyyyyyyyyyyyyyyy 644463 yyyyyyyyyyyyyyyyy 644464 yyyyyyyyyyyyyyyyy 644465 yyynyyyyyynyyyyyy 644466 yyynyyyyyynyyyyyy 644467 yyynyyyyyynyyyyyy 644468 yyynyyyyyynyyyyyy 644469 yyyyyyyyyyyyyyyyy 644470 yyyyyyyyyyyyyyyyy 644471 yyyyyyyyyyyyyyyyy 644472 yyyyyyyyyyyyyyyyy 644501 yyyyyyyyyyyyyyyyy 644502 yyyyyyyyyyyyyyyyy 644566 yyyyyyyyyyyyyyyyy 644567 yyyyyyyyyyyyyyyyy 644569 yyyyyyyyyyyyyyyyy 644570 yyyyyyyyyyyyyyyyy 644572 yyyyyyyyyyyyyyyyy 644783 yyynyyyyyynyyyyyy 644791 yyyyyyyyyyyyyyyyy 644860 yyynyyyyyynyyyyyy 644878 yyynyyyyyynyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyyyyyyyyyyy yyynyyyyyyyy yyynyyyyyyyy 640383 640384 640385 640387 640388 640389 640445 644611 644612 644613 644614 644615 644616 644617 644749 644750 644751 644752 644753 644754 644755 647123 647124 647125 647126 647127 647128 647129 647130 647210 647211 647212 647227 647228 647229 647230 647646 647648 1744017 y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y ynyyynyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y ynyyynyyy y yyyyyyyyy y ynyyynyyy y ynyyynyyy mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 35 mta-156 .156 [3.96] 644763 this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-156 header and connector combination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not acceptable for mating. headers 641202 641203 641204 641207 641208 641209 641210 644627 644628 644629 644630 644631 644632 644633 644756 644757 644758 644759 644760 644761 644762 647131 647132 647133 647134 647135 647136 641217 yyynyyyyyynyyyyyy 641218 yyynyyyyyynyyyyyy 641219 yyynyyyyyynyyyyyy 641220 yyynyyyyyynyyyyyy 641221 yyynyyyyyynyyyyyy 641222 yyyyyyyyyyyyyyyyy 641223 yyyyyyyyyyyyyyyyy 641224 yyyyyyyyyyyyyyyyy 641225 yyyyyyyyyyyyyyyyy 641226 yyyyyyyyyyyyyyyyy 641227 yyynyyyyyynyyyyyy 641228 yyynyyyyyynyyyyyy 641229 yyynyyyyyynyyyyyy 641230 yyynyyyyyynyyyyyy 641231 yyynyyyyyynyyyyyy 641232 yyyyyyyyyyyyyyyyy 641233 yyyyyyyyyyyyyyyyy 641234 yyyyyyyyyyyyyyyyy 641235 yyyyyyyyyyyyyyyyy 641236 yyyyyyyyyyyyyyyyy 644460 yyynyyyyyynyyyyyy 644662 yyynyyyyyynyyyyyy 644663 yyynyyyyyynyyyyyy 644687 yyyyyyyyyyyyyyyyy 644718 yyynyyyyyynyyyyyy 644720 yyynyyyyyynyyyyyy connectors headers 641113 641114 641115 641118 641119 641120 641121 644764 644765 644766 644767 644768 644769 647139 647140 647141 647142 647143 647144 647649 connectors matrix for .000030 [0.00076] gold plated part numbers matrix for .000015 [0.00038] gold plated part numbers y yynyyyyyy y yynyyyyyy y yynyyyyyy y yynyyyyyy y yynyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yynyyyyyy y yynyyyyyy y yynyyyyyy y yynyyyyyy y yynyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yyyyyyyyy y yynyyyyyy y yynyyyyyy y yynyyyyyy y yyyyyyyyy y yynyyyyyy y yynyyyyyy 641148 yyynyyyyyyyyynyyyyyyy 641149 yyynyyyyyyyyynyyyyyyy 641150 yyynyyyyyyyyynyyyyyyy 641151 yyynyyyyyyyyynyyyyyyy 641152 yyynyyyyyyyyynyyyyyyy 641153 yyyyyyyyyyyyyyyyyyyyy 641154 yyyyyyyyyyyyyyyyyyyyy 641155 yyyyyyyyyyyyyyyyyyyyy 641156 yyyyyyyyyyyyyyyyyyyyy 641157 yyyyyyyyyyyyyyyyyyyyy 641168 yyynyyyyyyyyynyyyyyyy 641169 yyynyyyyyyyyynyyyyyyy 641170 yyynyyyyyyyyynyyyyyyy 641171 yyynyyyyyyyyynyyyyyyy 641172 yyynyyyyyyyyynyyyyyyy 641173 yyyyyyyyyyyyyyyyyyyyy 641174 yyyyyyyyyyyyyyyyyyyyy 641175 yyyyyyyyyyyyyyyyyyyyy 641176 yyyyyyyyyyyyyyyyyyyyy 641177 yyyyyyyyyyyyyyyyyyyyy 644284 yyynyyyyyyyyynyyyyyyy 647478 yyynyyyyyyyyynyyyyyyy 647479 yyynyyyyyyyyynyyyyyyy 647496 yyyyyyyyyyyyyyyyyyyyy mta-156 connector/header mateability guide (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 36 mta-156 .156 [3.96] material and finish housing ul94v-2 rated, nylon, see below for color; or ul94v-0 rated, nylon, black contacts phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [.00038] post gold plated over nickel closed end with locking ramp closed end without locking ramp without polarizing tabs with polarizing tabs without polarizing tabs with polarizing tabs color coding by wire size for ul94v-2 connectors 26 awg blue 24 awg white 22 awg red 20 awg yellow 18 awg orange all wire sizes in ul94v-0 black .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .355 [9.02] .230 [5.84] .156 [3.96] typ. a .050 [1.27] .097 [2.46] .100 [2.54] .258 [6.56] .050 [1.27] .725 [18.42] .245 [6.22] .325 [8.26] .355 [9.02] .180 [4.57] .050 [1.27] .156 [3.96] typ. a .047 [1.19] .100 [2.54] .258 [6.56] .050 [1.27] for mateability options, see matrix on pages 34 and 35. mating half visuals for closed end connectors with locking ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 front bend headers only). for mateability options, see matrix on pages 34 and 35. mating half visuals for closed end connectors without locking ramp, see pages 46 thru 53. notes: 1. only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. refer to pages 70 thru 74 for approved wire listing. 3. for strain reliefs and dust covers, see pages 40 and 41. 4. for keying plugs and panel mount end caps, see page 42. 5. other circuit sizes are available upon request. minimums may apply. 6. connector circuits can be molded closed for keying pur- poses. minimums may apply. 7. where no part numbers appear in the chart, parts can be made available upon request. minimums may apply. 8. to determine connector overall length (dim. a), multiply .156 x the number of circuits. example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. mta-156 idc connectorsclosed end mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 37 mta-156 .156 [3.96] base part numbers closed end with locking ramp closed end without locking ramp without tabs with tabs without tabs with tabs connector type connector connector connector connector & wire size part rohs part rohs part rohs part rohs nos. equiv. nos. equiv. nos. equiv. nos. equiv. standard ul94v-2, tin plated 18 awg 640426 32C54 643817 32C54 640431 32C54 644461 1 32C44 0.8C0.9 mm 2 20 awg 640427 32C54 643818 32C54 640432 32C54 644462 1 32C44 0.5C0.6 mm 2 22 awg 640428 32C54 643819 32C54 640433 32C54 644463 1 32C44 0.3C0.4 mm 2 24 awg 640429 32C54 643820 32C54 640434 32C54 644464 1 32C44 0.2 mm 2 26 awg 640430 32C54 643821 32C54 640435 32C54 0.12C0.15 mm 2 tape mounted on reel ul94v-2, tin plated 18 awg 640472 32C54 644878 32C54 640477 32C54 0.8C0.9 mm 2 20 awg 640473 32C54 640478 32C54 0.5C0.6 mm 2 22 awg 640474 32C54 644783 32C54 640479 32C54 644791 1 32C44 0.3C0.4 mm 2 24 awg 640475 32C54 640480 32C54 0.2 mm 2 26 awg 640476 32C54 640481 32C54 0.12C0.15 mm 2 standard ul94v-2, .000030 [0.00076] gold plated 18 awg 641217 32C54 644460 1 32C42 641222 32C54 0.8C0.9 mm 2 20 awg 641218 32C54 644663 1 32C42 641223 32C54 0.5C0.6 mm 2 22 awg 641219 32C54 644662 1 32C42 641224 32C54 644687 1 32C44 0.3C0.4 mm 2 24 awg 641220 32C54 641225 32C54 0.2 mm 2 26 awg 641221 32C54 641226 32C54 0.12C0.15 mm 2 standard ul94v-2, .000015 [0.00038] gold plated 18 awg 641148 32C54 644284 1 32C42 641153 32C54 0.8C0.9 mm 2 20 awg 641149 32C54 641154 32C54 0.5C0.6 mm 2 22 awg 641150 32C54 647478 1 32C42 641155 32C54 0.3C0.4 mm 2 24 awg 641151 32C54 641156 32C54 0.2 mm 2 26 awg 641152 32C54 641157 32C54 0.12C0.15 mm 2 standard ul94v-0, tin plated (black in color) 18 awg 644860 1 32C42 644502 1 32C42 644082 1 32C42 0.8C0.9 mm 2 22 awg 644501 1 32C42 644566 1 32C42 0.3C0.4 mm 2 1 other circuit sizes are available upon request. minimums may apply. note: blocked circuit configurations are available upon request. contact product engineer or product manager for details. minimums may apply. connector ordering information the base part numbers chart at right shows the base part number and number of circuits available for the described connec- tors. prefixes and suffixes are determined by the number of circuit positions in the connector. for example, the complete part number for a 10-position closed end con- nector with locking ramp and without polarizing tabs for 18 awg wire would be: base number 640426 plus prefix-and-suffix 4- -0 the correct ordering number is 4-640426-0 all part numbers in bold face are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-640426-2 3 3-640426-3 4 3-640426-4 5 3-640426-5 6 3-640426-6 7 3-640426-7 8 3-640426-8 9 3-640426-9 10 4-640426-0 11 4-640426-1 12 4-640426-2 13 4-640426-3 14 4-640426-4 15 4-640426-5 16 4-640426-6 17 4-640426-7 18 4-640426-8 19 4-640426-9 20 5-640426-0 21 5-640426-1 22 5-640426-2 23 5-640426-3 24 5-640426-4 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. mta-156 idc connectorsclosed end (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 38 mta-156 .156 [3.96] material and finish housing ul94v-2 rated, nylon, see below for color; or ul94v-0 rated, nylon, black contacts phosphor bronze; post tin plated, .000030 [.00076] or .000015 [.00038] post gold plated over nickel feed-thru with locking ramp feed-thru without locking ramp without polarizing tabs with polarizing tabs without polarizing tabs with polarizing tabs .725 [18.42] .245 [6.22] .325 [8.26] .385 [9.78] .180 [4.57] .156 [3.96] typ. a .050 [1.27] .047 [1.19] .258 [6.56] .050 [1.27] .100 [2.54] .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .385 [9.78] .230 [5.84] .156 [3.96] typ. a .050 [1.27] .097 [2.46] .100 [2.54] .258 [6.56] .050 [1.27] for mateability options, see matrix on pages 34 and 35. mating half visuals for feedCthru connectors with locking ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 front bend headers only). for mateability options, see matrix on pages 34 and 35. mating half visuals for feedCthru connectors without locking ramp, see pages 46 thru 53. color coding by wire size for ul94v-2 connectors 26 awg blue 24 awg white 22 awg red 20 awg yellow 18 awg orange all wire sizes in ul94v-0 black notes: 1. only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. refer to pages 70 thru 74 for approved wire listing. 3. for strain reliefs and dust covers, see pages 40 and 41. 4. for keying plugs and panel mount end caps, see page 42. 5. other circuit sizes are available upon request. minimums may apply. 6. connector circuits can be molded closed for keying pur- poses. minimums may apply. 7. where no part numbers appear in the chart, parts can be made available upon request. minimums may apply. 8. to determine connector overall length (dim. a), multiply .156 x the number of circuits. example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. mta-156 idc connectorsfeed-thru mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 39 mta-156 .156 [3.96] connector ordering information the base part numbers chart at right shows the base part number and num- ber of circuits available for the described connectors. prefixes and suffixes are determined by the number of circuit positions in the connector. for example, the complete part number for a 10-position feed-thru con- nector with locking ramp and without polarizing tabs for 18 awg wire would be: base number 640599 plus prefix-and-suffix 4- -0 the correct ordering number is 4-640599-0 the part numbers in bold face are the rohs equiva- lent version. example: no. of lead free pos. rohs prefix/suffix 2 3-640599-2 3 3-640599-3 4 3-640599-4 5 3-640599-5 6 3-640599-6 7 3-640599-7 8 3-640599-8 9 3-640599-9 10 4-640599-0 11 4-640599-1 12 4-640599-2 13 4-640599-3 14 4-640599-4 15 4-640599-5 16 4-640599-6 17 4-640599-7 18 4-640599-8 19 4-640599-9 20 5-640599-0 21 5-640599-1 22 5-640599-2 23 5-640599-3 24 5-640599-4 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. base part numbers feed-thru with locking ramp feed-thru without locking ramp without tabs with tabs without tabs with tabs connector type connector connector connector connector & wire size part rohs part rohs part rohs part rohs nos. equiv. nos. equiv. nos. equiv. nos. equiv. standard ul94v-2, tin plated 18 awg 640599 32C54 644465 1 32C44 640604 32C54 644469 1 32C44 0.8C0.9 mm 2 20 awg 640600 32C54 644466 1 32C44 640605 32C54 644470 1 32C44 0.5C0.6 mm 2 22 awg 640601 32C54 644467 1 32C44 640606 32C54 644471 1 32C44 0.3C0.4 mm 2 24 awg 640602 32C54 644468 1 32C44 640607 32C54 644472 1 32C44 0.2 mm 2 26 awg 640595 32C54 640608 32C54 0.12C0.15 mm 2 tape mounted on reel ul94v-2, tin plated 18 awg 641302 32C54 641306 32C54 0.8C0.9 mm 2 20 awg 641303 32C54 641307 32C54 0.5C0.6 mm 2 22 awg 641304 32C54 641308 32C54 0.3C0.4 mm 2 24 awg 641305 32C54 641309 32C54 0.2 mm 2 26 awg 641301 32C54 641310 32C54 0.12C0.15 mm 2 standard ul94v-2, .00003 [.00076] gold plated 18 awg 641227 32C54 644718 1 32C44 641232 32C54 0.8C0.9 mm 2 20 awg 641228 32C54 641233 32C54 0.5C0.6 mm 2 22 awg 641229 32C54 644720 1 32C44 641234 32C54 0.3C0.4 mm 2 24 awg 641230 32C54 641235 32C54 0.2 mm 2 26 awg 641231 32C54 641236 32C54 0.12C0.15 mm 2 standard ul94v-2, .000015 [.00038] gold plated 18 awg 641168 32C54 647479 1 32C42 641173 32C54 0.8C0.9 mm 2 20 awg 641169 32C54 641174 32C54 0.5C0.6 mm 2 22 awg 641170 32C54 647496 1 32C42 641175 32C54 0.3C0.4 mm 2 24 awg 641171 32C54 641176 32C54 0.2 mm 2 26 awg 641172 32C54 641177 32C54 0.12C0.15 mm 2 standard ul94v-0, tin plated 18 awg 644567 1 32C42 644570 1 32C42 0.8C0.9 mm 2 22 awg 644569 1 32C42 644572 1 32C42 0.3C0.4 mm 2 1 other circuit sizes are available upon request. minimums may apply. note: blocked circuit configurations are available upon request. contact product engineer or product manager for details. minimums may apply. mta-156 idc connectorsfeed-thru (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 40 mta-156 .156 [3.96] a .130 [3.30] .105 [2.67] .440 [11.18] .335 [8.51] retention dimple .127 [3.23] .440 [11.18] note: this portion of front locking bar may or may not be present a .335 [8.51] closed end covers material (rohs compliant) strain relief covers ul94v-2 rated, nylon, white dust covers ul94v-0 rated, polyester, white strain relief covers dust covers base part numbers closed end strain relief dust covers covers cover no. of cover no. of part nos. circuits part nos. circuits 643067 2C24 640551 2C24 cover length no. of dim. prefix/ circuits a suffix 2 .312 -2 7.92 3 .468 -3 11.89 4 .624 -4 15.85 5 .780 -5 19.81 6 .936 -6 23.77 7 1.092 -7 27.74 8 1.248 -8 31.7 9 1.404 -9 35.66 10 1.560 1- -0 39.62 11 1.716 1- -1 43.59 12 1.872 1- -2 47.55 13 2.028 1- -3 51.51 14 2.184 1- -4 55.47 15 2.340 1- -5 59.44 16 2.496 1- -6 63.4 17 2.652 1- -7 67.36 no. of dim. prefix/ circuits a suffix no. of dim. prefix/ circuits a suffix 18 2.808 1- -8 71.32 19 2.964 1- -9 75.29 20 3.120 2- -0 79.25 21 3.276 2- -1 83.21 22 3.432 2- -2 87.17 23 3.588 2- -3 91.14 24 3.744 2- -4 95.1 cover ordering information the base part numbers chart at right shows the base part number and number of circuits available for the described cover. prefixes and suffixes are determined by the number of circuit positions in the cover. for example, the complete part number for a 10-position closed-end strain relief cover would be: base number 643067 plus prefix-and-suffix 1- -0 the correct ordering number is 1-643067-0 feed-thru covers material (rohs compliant) strain relief covers ul94v-2 rated, nylon, white dust covers ul94v-0 rated, polyester, white strain relief covers dust covers .127 [3.23] .470 [11.94] note: this portion of front locking bar may or may not be present a a .325 [8.26] .475 [12.07] .130 [3.3] retention dimple base part numbers feed-thru strain relief dust covers covers cover no. of cover no. of part nos. circuits part nos. circuits 643071 2C24 640643 2C24 mta-156 connector accessories mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 41 mta-156 .156 [3.96] crimp snap-in contacts material and finish contacts phosphor bronze, tin plated .110 [2.79] .105 [2.67] .580 [14.73] .165 [4.19] max. wire size part nos. awg mm 2 loose piece* strip** 26C22 .12C0.3 640557-3 640556-3 22C18 0.3C0.9 640559-3 640558-3 * *hand tool no. 59837-1 (408-6528) **amp-o-lectric model g termination machine (request catalog 65828) note: requires applicator. for part number, call technical support. special applications for crimp snap-in contacts are: 1. double wire per contact 2. coax or shielded wire 3. mixed wire size in same connector note: only one crimp snap-in contact per connector. wire size part numbers awg mm 2 tin plated .000030 [0.00076] .000015 [0.00038] gold plated gold plated 18 0.8C0.9 640631-3 641143-4 641143-3 20 0.5C0.6 640632C3 641144-4 641144-3 22 0.3C0.4 640633-3 641145-4 641145-3 24 0.2 640634-3 641146-4 641146-3 26 0.12C0.15 640635-3 641147-4 641147-3 replacement idc contacts material and finish contacts phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel note: tyco electronics does not rec- ommend terminating an mta contact more than one time. use replacement contacts when required for field repairs or wire changes. .637 [16.18] .125 [3.18] mta-156 connector accessories (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 42 mta-156 .156 [3.96] .375 [9.52] .300 [7.62] .065 [1.65] .051 [1.30] .066 [1.68] .070 [1.78] dia. .300 [7.62] .085 [2.16] .065 [1.65] .051 [1.30] .066 [1.68] .453 [11.5] .578 [14.7] .010 [.254] max. r. typ. at min. tolerance cutout keying plugs material (rohs compliant) ul94v-2 rated, nylon, natural color note: removal of contact is not necessary when using keying plug. loose piece part no. 640629-1 (flush) used with keyed headers on carrier strip part no. 641623-1 (flush) (10 per strip) long nose flush .125 [3.18] .500 [12.70] ref. 2.525 [64.14] ref. .300 [7.62] ref. panel mount end caps part no. 641440-1 part no. 641533-1 (2-position only) material (rohs compliant) ul94v-2 rated, nylon, black notes: 1. both left-hand and right-hand end caps are attached by a con- necting tab. this tab must be broken off prior to installing on connector. 2. for best results attach panel mount end caps to the mta-156 (idc) connectors shown on pages 36 thru 39. while not preferred, panel mount end caps can be attached to mta-156 (idc) posted connector on page 45. .440 [11.18] .520 [13.2] .410 [10.41] .550 [13.97] two-position only 641533-1 3- thru 24-position 641440-1 see note 1 .453 [11.5] a .010 [.254] max. r. typ. at min. tolerance cutout no. of dim. pos. a 3 .736 18.69 4 .892 22.66 6 1.204 30.58 9 1.672 42.47 12 2.140 54.36 15 2.608 66.24 24 4.012 101.9 recommended panel cutout (recommended panel thickness .062 [1.57] to .067 [1.70] max.) .564 [14.33] .520 [13.2] .440 [11.18] part no. 640630-1 (long nose) used with staked post mta-156 connector accessories (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 43 mta-156 .156 [3.96] mta-156 posted connector/connector mateability guide posted connectors connectors 640426 yyyyyyyyyy 640427 yyyyyyyyyy 640428 yyyyyyyyyy 640429 yyyyyyyyyy 640430 yyyyyyyyyy 640431 nnnnnnnnnn 640432 nnnnnnnnnn 640433 nnnnnnnnnn 640434 nnnnnnnnnn 640435 nnnnnnnnnn 640472 yyyyyyyyyy 640473 yyyyyyyyyy 640474 yyyyyyyyyy 640475 yyyyyyyyyy 640476 yyyyyyyyyy 640477 nnnnnnnnnn 640478 nnnnnnnnnn 640479 nnnnnnnnnn 640480 nnnnnnnnnn 640481 nnnnnnnnnn 640595 yyyyyyyyyy 640599 yyyyyyyyyy 640600 yyyyyyyyyy 640601 yyyyyyyyyy 640602 yyyyyyyyyy 640604 nnnnnnnnnn 640605 nnnnnnnnnn 640606 nnnnnnnnnn 640607 nnnnnnnnnn 640608 nnnnnnnnnn 641301 yyyyyyyyyy 641302 yyyyyyyyyy 641303 yyyyyyyyyy 641304 yyyyyyyyyy 641305 yyyyyyyyyy 641306 nnnnnnnnnn 641307 nnnnnnnnnn 641308 nnnnnnnnnn 641309 nnnnnnnnnn 641310 nnnnnnnnnn 643817 nnnnnnnnnn 643818 nnnnnnnnnn 643819 nnnnnnnnnn 643820 nnnnnnnnnn 643821 nnnnnnnnnn 644082 nnnnnnnnnn 644461 nnnnnnnnnn 644462 nnnnnnnnnn 644463 nnnnnnnnnn 644464 nnnnnnnnnn 644465 nnnnnnnnnn 644466 nnnnnnnnnn 644467 nnnnnnnnnn 644468 nnnnnnnnnn 644469 nnnnnnnnnn 644470 nnnnnnnnnn 644471 nnnnnnnnnn 644472 nnnnnnnnnn 644501 nnnnnnnnnn 644502 nnnnnnnnnn 644566 nnnnnnnnnn 644567 nnnnnnnnnn 644569 nnnnnnnnnn 644570 nnnnnnnnnn 644572 nnnnnnnnnn 644783 nnnnnnnnnn 644791 nnnnnnnnnn 644860 yyyyyyyyyy 644878 nnnnnnnnnn 641435 641436 641437 641438 641439 641522 641523 641524 641525 641526 matrix for tin plated part numbers this matrix has been pre- pared to assist you, our customer, in defining the correct mating halves for the mta-156 posted con- nector and connector com- bination. where a y is indicated the combination is a valid mating pair. where an n is indicated the combination is not acceptable for mating. mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 44 mta-156 .156 [3.96] this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-156 posted connector and connector combination. where a y is indi- cated the combination is a valid mating pair. where an n is indicated the combination is not acceptable for mating. posted connectors posted connectors 644807 644809 644812 644814 641217 yyyy 641218 yyyy 641219 yyyy 641220 yyyy 641221 yyyy 641222 nnnn 641223 nnnn 641224 nnnn 641225 nnnn 641226 nnnn 641227 yyyy 641228 yyyy 641229 yyyy 641230 yyyy 641231 yyyy 641232 nnnn 641233 nnnn 641234 nnnn 641235 nnnn 641236 nnnn 644460 nnnn 644662 nnnn 644663 nnnn 644687 nnnn 644718 nnnn 644720 nnnn connectors 643995 647476 647481 647497 connectors matrix for .000030 [0.00076] gold plated part numbers matrix for .000015 [0.00038] gold plated part numbers 641148 yyyy 641149 yyyy 641150 yyyy 641151 yyyy 641152 yyyy 641153 nnnn 641154 nnnn 641155 nnnn 641156 nnnn 641157 nnnn 641168 yyyy 641169 yyyy 641170 yyyy 641171 yyyy 641172 yyyy 641173 nnnn 641174 nnnn 641175 nnnn 641176 nnnn 641177 nnnn 644284 nnnn 647478 nnnn 647479 nnnn 647496 nnnn mta-156 posted connector/connector mateability guide (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 45 mta-156 .156 [3.96] closed end feed-thru .840 [21.34] .126 [3.20] .100 [2.54] .045 [1.14] sq. 9 1.560 1.408 -9 39.62 35.76 12 2.028 1.876 1- -2 51.51 47.65 15 2.496 2.344 1- -5 63.40 59.54 24 3.900 3.748 2- -4 99.06 95.20 no. of dim. prefix/ circuits ab suffix 1 2 3 4 a dim. .045 [1.14] sq. .370 [9.4] .105 [2.67] .355 [9.02] .487 [12.37] ref. 1.010 [25.65] b dim. .156 [3.96] [ ] .010 0.25 a dim. .045 [1.14] sq. .370 [9.4] .105 [2.67] .385 [9.78] .487 [12.37] ref. 1.010 [25.65] b dim. p .156 [3.96] [ ] .010 0.25 performance data voltage rating 600 vac current rating 7 amp max. low-level resistance 7 m max. initial dielectric withstanding voltage 1500 vac/1 min. insulation resistance 5000 m min. initial operating temperature -55 c to 105 c wire size part awg mm 2 numbers 18 0.8-0.9 3-641425-1 20 0.5-0.6 3-641426-1 22 0.3-0.4 3-641427-1 24 0.2 3-641428-1 26 0.12-0.15 3-641429-1 technical documents product specification 108-1065 mta-156 posted connector application specification 114-1020 mta-156 connectors, posted connectors and card edge connectors replacement idc contacts material and finish contacts copper alloy, post tin plated over nickel base part numbers connector type closed end connector 1 feed-thru connector 1 & wire size part nos. rohs equiv. part nos. rohs equiv. standard ul 94v-2, tin plated 18 awg 641435 32, 33, 34, 36, 39, 42, 45, 54 641522 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm 2 20 awg 641436 32, 33, 34, 36, 39, 42, 45, 54 641523 32, 33, 34, 36, 39, 42, 45, 54 0.5-0.6 mm 2 22 awg 641437 32, 33, 34, 36, 39, 42, 45, 54 641524 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm 2 24 awg 641438 32, 33, 34, 36, 39, 42, 45, 54 641525 32, 33, 34, 36, 39, 42, 45, 54 0.2 mm 2 26 awg 641439 32, 33, 34, 36, 39, 42, 45, 54 641526 32, 33, 34, 36, 39, 42, 45, 54 0.12-0.15 mm 2 standard ul 94v-2, .000030 [0.00076] gold plated 18 awg 644807 32, 33, 34, 36, 39, 42, 45, 54 644812 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm 2 20 awg 2 2 0.5-0.6 mm 2 22 awg 644809 32, 33, 34, 36, 39, 42, 45, 54 644814 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm 2 24 awg 2 2 0.2 mm 2 26 awg 2 2 0.12-0.15 mm 2 standard ul 94v-2, .000015 [0.00038] gold plated 18 awg 647476 32, 33, 34, 36, 39, 42, 45, 54 647481 32, 33, 34, 36, 39, 42, 45, 54 0.8-0.9 mm 2 22 awg 643995 32, 33, 34, 36, 39, 42, 45, 54 647497 32, 33, 34, 36, 39, 42, 45, 54 0.3-0.4 mm 2 1 mta-156 posted connectors (closed end and feed-thru) will only mate with mta-156 connectors with locking ramp and without polarizing tabs. they will not mate with mta-156 quad connectors. 2 parts can be made available upon request. minimums may apply. no. of dim. circuits ab suffix 2 .468 .316 -2 11.89 8.03 3 .624 .472 -3 15.85 11.99 4 .780 .628 -4 19.81 15.95 6 1.092 .940 -6 27.74 23.88 material and finish housing ul 94v-2 rated, nylon, see chart for color contacts copper alloy, post tin or .000030 [.00076] gold plated over nickel notes: 1. mating half visuals - pages 36 thru 39. 2. strain relief & dust covers - pages 40 & 41. 3. approved wire listing - page 70. connector ordering information the base part numbers chart at right shows the base part number and number of circuits available for the described connectors. prefixes and suffixes are deter- mined by the number of circuit positions in the connector. for example, the complete part number for a 12-position closed end connector for 18 awg wire would be: base number 641435 plus prefix-and-suffix 4- -2 the correct ordering number is 4-641435-2 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. color coding by wire size for ul 94v-2 connectors 18 awg orange 20 awg yellow 22 awg red 24 awg white 26 awg blue mta-156 idc posted connectors (wire-to-wire)closed end, feed-thru mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 46 mta-156 .156 [3.96] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick printed circuit boards. 4. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, see pages 36 thru 39, 55, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: base number 640383 plus prefix-and-suffix 4- -0 the correct ordering number is 4-640383-0 the part numbers in bold face are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-640383C2 thru 24 5-640383-4 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. .250 [6.35] a .045 [1.14] .156 [3.96] typ. .078 [1.98] typ. .450 [11.43] .125 [3.18] solder tail length (see chart) .156 [3.96] edge of board .140 [3.56] min. .125 [3.18] post no. 1 ref. recommended mounting hole pattern for .062 [1.57] thk. pc board base part numbers square posts round posts .125 [3.18] .175 [4.45] .125 [3.18] .175 [4.45] solder tail solder tail solder tail solder tail header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 640383 2C24 644749 2C24 640384 2C24 644750 2C24 standard ul94v-0, .000030 [0.00076] gold plated 641202 32C54 644756 32C54 641203 32C54 644757 32C54 standard ul94v-0, .000015 [0.00038] gold plated 641113 32C54 644763 32C54 641114 32C54 644764 32C54 pc board hole diameters square round post post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] pc board hole diameters square round post post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] note: consult product drawing for details on placing headers onto pc boards. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-156 flat headersstraight mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 47 mta-156 .156 [3.96] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick printed circuit boards. 4. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, see pages 36 thru 39, 55, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: base number 641204 plus prefix-and-suffix 4- -0 the correct ordering number is 4-641204-0 the part numbers in bold face are the rohs equivalent ver- sion. example: no. of lead free pos. rohs prefix/suffix 2 3-641204C2 thru 24 5-641204-4 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. .125 [3.18] a a .045 [1.14] sq. .156 [3.96] typ. .078 [1.98] typ. .250 [6.35] .156 [3.96] .080/.070 [2.03/1.78] solder tail length (see chart) .390 [9.91] edge of board x post no. 1 .125 [3.18] .100 [2.54] recommended mounting hole pattern for .062 [1.57] thk. pc board recommended mounting hole pattern for .063 [1.60] thk. pc board for retentive leg header y = .140 [3.56] min., .430 [10.92] max. when mated with mta connector. retentive leg x = .140 [3.56] min., .430 [10.92] max. when mated with mta connector. x = .140 [3.56] min. when mated with sl-156 wire-to-board connector. note: consult product drawing for details on placing headers onto pc boards. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. base part numbers square posts retentive leg .125 [3.18] solder tail .175 [4.45] solder tail header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647646 2C12 640385 2C24 644751 2C24 standard ul94v-0, .000030 [0.00076] gold plated 641204 32C54 644758 32C54 standard ul94v-0, .000015 [0.00038] gold plated 641115 32C54 644765 32C54 .390 .015 [9.91 0.38 ] .125 [3.18] 16 edge of board .156 [3.96] y typ. ? .063 .002 [1.60 0.05 ] typ. mta-156 flat headersright-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 48 mta-156 .156 [3.96] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick printed circuit boards. 4. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. for polarizing purposes only use connectors without a lock- ing ramp. see pages 36 thru 39, 55, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: base number 641208 plus prefix-and-suffix 4- -0 the correct ordering number is 4-641208-0 the part numbers in bold face are the rohs equivalent version. example: no. of standard lead free pos. prefix/suffix rohs prefix/suffix 2 641208C2 3-641208C2 thru 24 2-641208-4 5-641208-4 see page 15 for an explanation of rohs lead free equivalents. .156 [3.96] .125 [3.18] .450 [11.43] solder tail length (see chart) .300 [7.62] a .156 [3.96] .045 [1.14] .180 [4.57] .078 [1.98] post no. 1 .175 [4.45] min. edge of board y .425 [10.8] ref. typ. typ. recommended mounting hole pattern for .062 [1.57] thk. pc board y = .068 [1.73] max. 2-8 position tin plated and 2C24 position gold plated headers. y = .073 [1.85] 9-24 position tin plated headers. pc board hole diameters square round post post .080/.070 .070/.060 [2.03/1.78] [1.78/1.52] note: consult product drawing for details on placing headers onto pc boards. note: all rohs equivalent part numbers may not be available upon catalog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) and tube loaded product are available upon request. please contact product engineer or product manager for details. base part numbers square posts round posts retentive .125 [3.18] .175 [4.45] .125 [3.18] .175 [4.45] leg solder tail solder tail solder tail solder tail header rohs header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 1744017 2-12 640445 2C24 644752 2C24 640388 2C24 644753 2C24 standard ul94v-0, .000030 [0.00076] gold plated 641208 32C54 644759 32C54 641209 32C54 644760 32C54 standard ul94v-0, .000015 [0.00038] gold plated 641119 32C54 644766 32C54 641120 32C54 644767 32C54 .068 [1.7] .400 [10.16] 16 3 retentive leg mta-156 friction lock headersstraight mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 49 mta-156 .156 [3.96] material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying pur- poses. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36-3.18] thick printed circuit boards. 4. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. when using front bend headers for mating half visuals use connectors with a locking ramp for polarization/ retention purposes. when using rear bend headers for mating half visuals use connectors with- out a locking ramp. for polariza- tion purposes only see pages 36 thru 39, 55, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are determined by the number of post positions in the header. for example, the complete part number for a 10-position header with square posts, front bend, and a .125 [3.18] solder tail length would be: base number 641210 plus prefix-and-suffix 4- -0 the correct ordering number is 4-641210-0 the part numbers in bold face are the rohs equivalent version. example: no. of standard lead free pos. prefix/suffix rohs prefix/suffix 2 641210C2 3-641210C2 thru 24 2-641210-4 5-641210-4 see page 15 for an explanation of rohs lead free equivalents. .125 [3.18] .450 [11.43] .212 [5.38] .425 [10.8] .156 [3.96] y .045 [1.14] sq. .180 [4.57] a .300 [7.62] .078 [1.98] typ. typ. .156 [3.96] .080/.070 [2.03/1.78] edge of board post no. 1 x solder tail length (see chart) .425 [10.8] .157 [3.99] y recommended mounting hole pattern for .062 [1.57] thk. pc board front bend x = .325 [8.26] min., .400 [10.16] max., when mated with mta connector. x = .325 [8.26] min., .345 [8.76] max., when mated with sl-156 connector. rear bend x = .500 [12.7] min., .650 [16.51] max., when mated with mta connector. x = .500 [12.7] min., when mated with sl-156 connector. y = .068 [1.73] max. 2-8 position tin plated and 2C24 position gold plated headers. y = .073 [1.85] 9-24 position tin plated headers. note: consult product drawing for details on placing headers onto pc boards. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. base part numbers square posts front bend rear bend .125 [3.18] .175 [4.45] .125 [3.18] .175 [4.45] solder tail solder tail solder tail solder tail header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 640389 2C24 644754 2C24 640387 2C24 644755 2C24 standard ul94v-0, .000030 [0.00076] gold plated 641210 32C54 644761 32C54 641207 32C54 644762 32C54 standard ul94v-0, .000015 [0.00038] gold plated 641121 32C54 644768 32C54 641118 32C54 644769 32C54 mta-156 friction lock headersright-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 50 mta-156 .156 [3.96] recommended mounting hole pattern for .062 [1.57] thk. pc board .210 [5.33] a .125 [3.18] .156 [3.96] .076 [1.93] .045 [1.14] .425 [10.80] .100 [2.54] .125 [3.18] .450 [11.43] .545 [13.84] .073 [1.85] .156 [3.96] .066/.062 [1.68/1.57] edge of board dia. .167 [4.24] .225 [5.72] min. .078 [1.98] 90 ref. typ. retention tabs 4 plc. post no. 1 polarized retention peg typ. peg hole polarized retention peg material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated or .000030 [0.00076] gold over nickel notes: 1. post(s) can be omitted for keying pur- poses. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. peg holes are not required in pc boards when headers without pegs are used. 3. one peg only on a 2 position header, other position sizes have two pegs. 4. headers with .00015 [0.00038] gold plated post are available upon request. minimums may apply. 5. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. for polarizing purposes only use connectors without a lock- ing ramp. see pages 36 thru 39, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with square posts with pegs would be: base number 644615 plus prefix-and-suffix 4- -0 the correct ordering number is 4-644615-0 the part numbers in bold face are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-644615C2 thru 18 4-644615-8 see page 15 for an explanation of rohs lead free equivalents. pc board hole diameters square round post post .069/.065 .054/.050 [1.75/1.65] [1.37/1.27] note: consult product drawing for details on placing headers onto pc boards. base part numbers square posts round posts without pegs with pegs without pegs with pegs header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 644611 32C48 644615 32C48 644612 32C48 644616 32C48 standard ul94v-0, .000030 [0.00076] gold plated 644627 32C48 644631 32C48 644628 32C48 644632 32C48 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. mta-156 polarized lock headersstraight mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 51 mta-156 .156 [3.96] polarized retention peg material and finish housing ul94v-0 rated, polyester, white posts copper alloy, tin plated or .000030 [0.00076] gold over nickel notes: 1. post(s) can be omitted for keying purposes. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. peg holes are not required in pc boards when headers without pegs are used. 3. one peg only on a 2 position header, other position sizes have two pegs. 4. headers with .00015 [0.00038] gold plated post are available upon request. minimums may apply. 5. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, use only connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. for polarizing purposes only use connectors without a lock- ing ramp. see pages 36 thru 39, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with front bend and with pegs would be: base number 644617 plus prefix-and-suffix 4- -0 the correct ordering number is 4-644617-0 the part numbers in bold face are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-644617C2 thru 18 4-644617-8 see page 15 for an explanation of rohs lead free equivalents. recommended mounting hole pattern for .062 [1.57] thk. pc board .125 [3.18] .156 [3.96] .076 [1.93] typ. .045 [1.14] .210 [5.33] typ. ref. .450 [11.43] .545 [13.84] .156 [3.96] edge of board dia. .239 [6.07] reg. hole .066/.062 [1.68/1.57] .078 [1.98] .069/.065 [1.75/1.65] 90 ref. typ. retention tabs 4 plc. post no. 1 a .100 [2.54] .425 [10.80] front bend rear bend .205 [5.21] typ. .073 [1.85] typ. .125 [3.18] .200 [5.08] typ. .125 [3.18] x typ. sq. front bend x = .350 [8.89] min., .825 [20.96] max., when mated with mta connector. x = .350 [8.89] min. when mated with sl-156 connector. rear bend x = .500 [12.7] min., .700 [17.78] max., when mated with mta connector. x = .500 [12.7] min., when mated with sl-156 connector. note: consult product drawing for details on placing headers onto pc boards. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. base part numbers square posts front bend rear bend without pegs with pegs without pegs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 644613 32C48 644617 32C48 644614 32C48 standard ul94v-0, .000030 [0.00076] gold plated 644629 32C48 644633 32C48 644630 32C48 mta-156 polarized lock headersright-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 52 mta-156 .156 [3.96] material and finish housing ul94v-0 rated, nylon, black posts copper alloy, tin plated, .000015 [0.00038] gold over nickel temperature maximum temperature rating: 280c notes: 1. post(s) can be omitted for keying pur- poses. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin-lead on the solder tail. 3. headers with straight and right-angle square posts are available upon request. minimums may apply. 4. to determine header overall length (dim. a), multiply .156 x the number of posts. example: .156 x 10 posts equals 1.560 inches [39.62 mm]. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. for polarizing purposes only use connectors without a lock- ing ramp. see pages 36 thru 39, 60 and 62. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with round tin plated posts: base number 647648 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647648-0 the part numbers in bold face are the rohs equivalent version. example: no. of lead free pos. rohs prefix/suffix 2 3-647648C2 12 4-647648-2 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. recommended mounting hole pattern for .062 [1.57] thick pc board base part numbers round post header rohs part nos. equiv. standard ul94v-0, tin plated 647648 32C42 standard ul94v-0, .000015 [0.00038] gold plated 647649 32C42 for use with infrared reflow process .650 .010 [16.51 0.25 ] solder paste area .057 .003 [1.45 0.08 ] pretinned plated thru hole typ. .100 [2.54] pretinned land (both sides) typ. .008 [0.20] min. thick solder paste in area shown .120 typ. [3.05] .156 typ. [3.96] .070 typ. [1.78] position no. 1 .120 typ. [3.05] note: consult product drawing for details on placing headers onto pc boards. note: select load headers (omitted pin headers) are available upon request. please contact product engineer or product manager for details. ? .045 .001 [1.14 0.03 ] .076 .003 [1.93 0.08 ] 2 plcs. .210 [5.33] .450 [11.43] .125 [3.18] mating end solder tail post no. 1 a ref. .156 [3.96] typ. .425 [10.80] .335 [8.51] .700 .010 [17.78 0.25 ] .125 .010 [3.18 0.25 ] ref. ref. typ. + .005 C .010 +0.13 C0.25 .073 [1.85 ] .545 .010 [13.84 0.25 ] typ. mta-156 friction lock high temperature headersstraight mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 53 mta-156 .156 [3.96] material and finish housing ul94v-0 rated, polyester, black posts copper alloy, tin plated; or .000030 [0.00076] or .000015 [0.00038] gold over nickel notes: 1. post(s) can be omitted for keying pur- poses. specify the desired post(s) to be omitted using the figure to identify post no. 1. 2. gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. peg holes are not required in pc boards when headers without pegs are used. 4. one peg only on a 2 position header, other position sizes have two pegs. 5. right-angle front and rear bend headers with retention pegs can be made avail- able upon request. minimums may apply. for mateability options, see matrix on pages 34, 35, 54 and 58. for mating half visuals, see pages 36 thru 39 and 55. header ordering information the base part numbers chart at right shows the base part number and number of posts available for the described headers. prefixes and suffixes are deter- mined by the number of post positions in the header. for example, the complete part number for a 10-position header with straight, square posts and with pegs would be: base number 647127 plus prefix-and-suffix 4- -0 the correct ordering number is 4-647127-0 no. of dim. rohs pos. a prefix/ suffix 2 .406 2--2 10.31 3 .562 2--3 14.27 4 .718 2--4 18.24 5 .874 2--5 22.20 6 1.030 2--6 26.16 7 1.186 2--7 30.12 8 1.342 2--8 34.09 9 1.498 2--9 38.05 10 1.654 3--0 42.01 11 1.810 3--1 45.97 12 1.966 3--2 49.94 note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. straight post (.045 [1.14] square or round) right-angle (.045 [1.14] square) a .455 [11.56] polarized retention peg .125 [3.18] .045 [1.14] post no. 1 .156 [3.96] .550 [13.97] .525 [13.34] .300 [7.62] .125 [3.18] .100 [2.54] .167 [4.24] .210 [5.33] .066/062 [1.68/1.58] dia. .156 [3.96] .078 [1.98] .167 [4.24] .245 [6.22] edge of board min. .066/062 [1.68/1.58] dia. .156 [3.96] .078 [1.98] .239 [6.07] .350/.700 [8.89/17.78] .069/.065 [1.75/1.65] edge of board dia. recommended mounting hole pattern for .062 [1.57] thick pc board using a straight post header recommended mounting hole pattern for .062 [1.57] thick pc board using a right-angle header front bend rear bend post no. 1 .156 [3.96] typ. .045 [1.14] .525 [13.34] ref. .300 [7.62] ref. .455 [11.56] .210 [5.33] .205 [5.21] .125 [3.18] post no. 1 .156 [3.96] typ. .045 [1.14] .525 [13.34] ref. .300 [7.62] ref. .455 [11.56] .210 [5.33] .205 [5.21 ] .002 0.05 .125 [3.18 ] .010 0.25 pc board hole diameters square post round post .069/.065 .054/.050 [1.75/1.65] [1.37/1.27] base part numbers straight square posts straight round posts without pegs with pegs without pegs with pegs header rohs header rohs header rohs header rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647123 22C32 647127 22C32 647124 22C32 647128 22C32 standard ul94v-0, .000030 [0.00076] gold plated 647131 22C32 647135 22C32 647132 22C32 647136 22C32 standard ul94v-0, .000015 [0.00038] gold plated 647139 22C32 647143 22C32 647140 22C32 647144 22C32 square posts right-angle posts, front bend right-angle posts, rear bend without pegs without pegs header rohs header rohs part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 647125 22C32 647126 22C32 standard ul94v-0, .000030 [0.00076] gold plated 647133 22C32 647134 22C32 standard ul94v-0, .000015 [0.00038] gold plated 647141 22C32 647142 22C32 note: select load headers (omitted pin headers) are available upon request. please contact product engineer or prod- uct manager for details. note: consult product drawing for details on placing headers onto pc boards. mta-156 shrouded headersstraight and right-angle mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 54 mta-156 .156 [3.96] 644329 644370 644371 644375 644376 644377 644381 644382 644383 644387 644388 644389 640389 y y y y y y y y y y y y 640385 y y y y y y y y y y y y 640383 y y y y y y y y y y y y 640445 y y y y y y y y y y y y 644611 y y y y y y y y y y y y 644613 y y y y y y y y y y y y connectors headers 644615 y y y y y y y y y y y y 644617 y y y y y y y y y y y y 644749 y y y y y y y y y y y y 644751 y y y y y y y y y y y y 644752 y y y y y y y y y y y y 644754 y y y y y y y y y y y y 647123 y y y y y y y y y y y y 647125 y y y y y y y y y y y y 647126 y y y y y y y y y y y y 647127 y y y y y y y y y y y y product facts provides four points of contact greater current carrying capability than standard mta-156 connectors connector styles include both closed end and feed- thru with locking ramp, with and without polarizing tabs in 2 through 12 positions available for wire ranges of 18 C 22 awg [0.9C 0.3 mm ] contacts are lubricated for fretting corrosion protection complies with tyco electronics quality specification 102-6, preparation of design objectives uses existing mta applica- tion tooling for termination quad connectors preloaded with contacts all contacts are slotted for insulation displacement (idc) termination technique connectors and headers are end-to-end stackable awg size is frosted on the side of the connector recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 satisfies the vde require- ments according to vde 110, insulation group b, 250 vac for air and creep- age paths r r the mta-156 quad con- nector provides a connec- tion with four points of contact. the ul94v-0 rated connector with multi-point contacts provides greater current carrying capability than the standard mta-156 connector. these connec- tors comply with tyco electronics quality specification 102-6* and satisfy the vde requirements according to vde 110. the connectors are avail- able for wire ranges of 18 C 22 awg [0.9C 0.3 mm 2 ] and in a variety of styles including closed end and feed-thru with locking ramp, with and without polarizing tabs. only one wire to be termin- ated into an idc contact slot. *the 102-6 quality specification is the new procedure for preparation of design objectives. its purpose is to provide a means for verifying the maximum current carrying capacity of the device. note: refer to pages 70 through 74 for approved wire listings. the mta-156 quad connectors only mate with standard mta- 156 square post headers and use existing mta application tooling for termination. performance data voltage rating 600 vac current rating 12.5 amp max. on a single circuit. for multiple circuit loading refer to product specification for current rating chart. low-level resistance 3.0 m max. initial dielectric withstanding voltage 1500 vac/1 min. insulation resistance 5000 m min. initial operating temperature -55 c to 105 c technical documents product specifications 108-1219 mta-156 quad connector system application specifications 114-1048 mta-156 quad connector this matrix has been prepared to assist you, our customer, in defining the correct mating halves for the mta-156 header and connector combination. where a y is indi- cated the combination is a valid mating pair. mta-156 idc quad connectors mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 55 mta-156 .156 [3.96] closed end with locking ramp without polarizing tabs with polarizing tabs with polarizing tabs .156 [3.96] typ. a .097 [2.46] .100 [2.54] .308 [7.82] .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .355 [9.02] .280 [7.11] .180 [4.57] .230 [5.84] .090 [2.29] without polarizing tabs .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .385 [9.78] .230 [5.84] .180 [4.57] .090 [2.29] .280 [7.11] feed-thru with locking ramp .156 [3.96] typ. a .097 [2.46] awg .100 [2.54] .308 [7.82] base part numbers closed end with locking ramp feed-thru with locking ramp without tabs with tabs without tabs with tabs connector type & wire size connector rohs connector rohs connector rohs connector rohs part nos. equiv. part nos. equiv. part nos. equiv. part nos. equiv. standard ul94v-0, tin plated 18 awg 644329 32C42 644381 32C42 644375 32C42 644387 32C42 0.8-0.9 mm 2 20 awg 644370 32C42 644382 32C42 644376 32C42 644388 32C42 0.5-0.6 mm 2 22 awg 644371 32C42 644383 32C42 644377 32C42 644389 32C42 0.3-0.4 mm 2 material and finish housing ul94v-0 rated, nylon, black contacts high conductivity copper alloy, post tin plated for mateability options, see matrix on page 54. for strain relief and dust covers, see pages 40 and 41. for mating half visuals, see pages 46 thru 48 and 50, 52 and 53, (49 and 51 front bend headers only). mates with tin-plated square posts only. refer to pages 70 thru 74 for approved wire listing. note: to determine connector overall length (dim. a), multiply .156 x the number of circuits. example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. note: tyco electronics does not rec- ommend terminating an mta contact more than one time. use replace- ment contacts when required for field repairs or wire gage changes. wire size part awg mm 2 numbers 18 0.8-0.9 3-644508-1 20 0.5-0.6 3-644509-1 22 0.3-0.4 3-644510-1 .562 [14.27] .116 [2.95] awg awg awg connector ordering information the base part numbers chart above shows the base part number and number of circuits available for the described connectors. prefixes and suffixes are deter- mined by the number of circuit positions in the connector. for example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 awg wire would be: base number 644329 plus prefix-and-suffix 1- -0 the correct ordering number is 1-644329-0 the set of numbers in bold face are the rohs equivalent ver- sion of the standard product. example: no. of standard lead free pos. prefix/suffix rohs prefix/suffix 2 644329C2 3-644329C2 thru 12 1-644329-2 4-644329-2 see page 15 for an explanation of rohs lead free equivalents. note: all rohs equivalent part num- bers may not be available upon cat- alog release. if the number you need is not available, please contact product engineering to expedite your request. replacement idc contacts material and finish contacts high conductivity copper alloy post tin plated mta-156 idc quad connectorsclosed end and feed-thru mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 56 mta-156 .156 [3.96] .170 [4.32] .156 [3.96] typ. a b c .161 [4.09] .094 [2.39] .380 [9.65] .075 [1.91] .677 [17.2] .440 [11.18] ref. .300 [7.62] .125 [3.18] dia. .312 [7.92 ] .005 0.13 .015 [0.38 ] .005 0.13 .100 [2.54] min. .100 [2.54] min. circuitry side .090 [2.29] min. .156 [3.96] typ. x 45 cham. both sides d [ ] .005 0.13 recommended pc board layout for .062 [1.57] thk. pc board b e .145 [3.68] .375 [9.53] .138 [3.51] .075 [1.91] r. .130 [3.3] typ. recommended panel cutout material and finish housing ul94v-0 rated, polyester, see chart for color contacts phosphor bronze, post tin plated note: refer to pages 70 thru 74 for approved wire listings. color coding by wire size for ul94v-0 connectors 26 awg blue 24 awg white 22 awg red 20 awg yellow 18 awg orange connector ordering information the base part numbers chart at right shows the base part number and num- ber of circuits available for the described connectors. prefixes and suffixes are determined by the number of circuit positions in the connector. for example, the complete part number for a 12-position closed end con- nector without mounting ears for 18 awg wire would be: base number 640859 plus prefix-and-suffix 1- -2 the correct ordering num- ber is 1-640859-2 see page 15 for an explanation of rohs lead free equivalents. performance data voltage rating 600 vac current rating 5 amp max. low-level resistance 7 m max. initial dielectric withstanding voltage 1250 vac/1 min. insulation resistance 5000 m min. initial operating temperature 55 c to 105 c technical documents product specification 108-1058 mta-156 card edge connectors application specification 114-1020 mta-156 connectors, posted connectors and card edge connectors base part numbers closed end feed-thru connector type without with without with & wire size mounting ears mounting ears mounting ears mounting ears no. of no. of no. of no. of connector circuits/ connector circuits/ connector circuits/ connector circuits/ part nos. rohs part nos. rohs part nos. rohs part nos. rohs equiv. equiv. equiv. equiv. standard ul94v-0, tin plated 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 18 awg 640859 15,18, 20-24 640864 15,18, 20-24 641283 15,18, 20-24 641288 15,18, 20-24 0.8-0.9 mm 2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 20 awg 640860 15,18, 20-24 640865 15,18, 20-24 641284 15,18, 20-24 641289 15,18, 20-24 0.5-0.6 mm 2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 22 awg 640861 15,18, 20-24 640866 15,18, 20-24 641285 15,18, 20-24 641290 15,18, 20-24 0.3-0.4 mm 2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 24 awg 640862 15,18, 20-24 640867 15,18, 20-24 641286 15,18, 20-24 641291 15,18, 20-24 0.2 mm 2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 3, 6, 9, 12, 26 awg 640863 15,18, 20-24 640868 15,18, 20-24 641287 15,18, 20-24 641292 15,18, 20-24 0.12-0.15 mm 2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 no. of dimensions prefix/ circuits abcde suffix 3 .500 [12.70] .926 [23.52] 1.248 [31.70] .484 [12.29] .650 [16.51] -3 6 .968 [24.59] 1.394 [35.41] 1.716 [43.59] .952 [24.18] 1.118 [28.40] -6 9 1.436 [36.47] 1.862 [47.29] 2.184 [55.47] 1.420 [36.07] 1.586 [40.28] -9 12 1.904 [48.36] 2.330 [59.18] 2.652 [67.36] 1.888 [47.96] 2.054 [52.17] 1- -2 15 2.372 [60.25] 2.798 [71.07] 3.120 [79.25] 2.356 [59.84] 2.522 [64.06] 1- -5 18 2.840 [72.14] 3.266 [82.96] 3.588 [91.14] 2.824 [71.73] 2.990 [75.95] 1- -8 20 3.152 [80.06] 3.578 [90.88] 3.900 [99.06] 3.136 [79.65] 3.302 [83.87] 2- -0 21 3.308 [84.02] 3.734 [94.84] 4.056 [103.02] 3.292 [83.62] 3.458 [87.83] 2- -1 22 3.464 [87.99] 3.890 [98.81] 4.212 [106.98] 3.448 [87.58] 3.614 [91.80] 2- -2 23 3.620 [91.95] 4.046 [102.77] 4.368 [110.95] 3.604 [91.54] 3.770 [95.76] 2- -3 24 3.776 [95.91] 4.202 [106.73] 4.524 [114.91] 3.760 [95.50] 3.926 [99.72] 2- -4 mta-156 idc card edge connectorsclosed end and feed-thru mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 57 mta-156 .156 [3.96] dust cover material (rohs compliant) ul94v-0 rated, polyester, white cover is for both closed end and feed-thru connectors cover ordering information the base part numbers chart at right shows the base part number and number of circuits available for the described cover. prefixes and suffixes are determined by the number of circuit positions in the cover. for example, the complete part number for a 12-position dust cover would be: base number 641106 plus prefix-and-suffix 1- -2 the correct ordering number is 1-641106-2 .130 [3.3] .609 [15.47] .126 [3.2] .100 [2.54] locking plugs material (rohs compliant) ul94v-2 rated, nylon, white part number 641101-1 a .130 [3.3] .530 [13.46] retention dimple no. of dim. prefix/ circuits a suffix 3 .504 -3 12.80 6 .972 -6 24.69 9 1.440 -9 36.58 12 1.908 1- -2 48.46 15 2.376 1- -5 60.35 18 2.844 1- -8 72.24 20 3.156 2- -0 80.16 21 3.312 2- -1 84.12 22 3.468 2- -2 88.09 23 3.624 2- -3 92.05 24 3.780 2- -4 96.01 .195 [4.95] .075 [1.91] .074 [1.88] 1.150 [29.21] note: contact can remain during locking plug installation. material (rohs compliant) ul94v-2 rated, nylon, white part number 641293-1 .900 [22.86] .170 [4.32] .100 [2.54] note: contact must be removed to install locking plug. base part number cover part no. no. of circuits 641106 3, 6, 9, 12, 15, 18, 20-24 replacement idc contacts material and finish phosphor bronze; post tin plated part numbers 3-640991-1 (18 awg [0.8-0.9 mm 2 ]) 3-640992-1 (20 awg [0.5-0.6 mm 2 ]) 3-640993-1 (22 awg [0.3-0.4 mm 2 ]) 3-640994-1 (24 awg [0.2 mm 2 ]) 3-640995-1 (26 awg [0.12-0.15 mm 2 ]) mta-156 idc card edge accessories mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 58 sl-156 .156 [3.96] the amp sl-156 connec- tors shown on the following pages are designed to mate with .045 [1.14] square or round post headers or staked posts on .156 [3.96] centers. the wire-to-board connector is a two-piece connector system with the wire crimped to the contact, then inserted into the hous- ing. this product mates with the mta-156 flat, polarized and friction lock header, or staked posts ( not mta-156 shrouded headers). performance data voltage rating 250 vac current rating 10 amp max. at 250 vac low-level resistance 3.0 m max. initial dielectric withstanding voltage 2000 vac/1 min. insulation resistance 1000 m min. initial operating temperature 55 c to 105 c the large insulation diameter (lid) contacts and housings are for use in applications where wire insulation is up to .112 [2.84] in diameter. technical documents product specification 108-1049, 108-1049-1, 108-1049-2 application specification 114-1021 product facts rugged wire-to-board interconnection to mate with .045 square or round post headers or staked posts on .156 centers standard connectors accept wire range of 18C24 awg [0.9C0.2 mm ] and lid connectors accept wire range of 18C24 awg [0.9C0.2 mm ] and a lim- ited 16 awg [1.29C1.42 mm ] (2550C2800 cma) two-piece interconnection system (connector/header) housing made of flame retardant nylon available in 1- through 24-position connector configurations connectors are end-to-end stackable wire-to-board system offers polarization with friction lock for positive mating meets the material requirements of table 23.1 of ul1410 standard for high-voltage television receivers and video productions recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 r r y 647230 n y n yy y yy y yy 647227 647228 647229 647260 y y n 644769 647262 n y y 647261 y y y y y y 644751 yy yyn yy yyy yy yyn 644752 644753 644754 644755 yyyy yyyy yyyy yn y y ny yy 644756 644757 644758 644759 644760 644761 644762 y 641113 647401 yy yyy 647400 yy yyy 647402 yy yyy y yyy y yyy y yyy yy y y yy yy 641114 641115 n y n 641118 641119 641120 641121 644763 644764 644765 644766 644767 644768 headers 640383 647401 yy yny 647400 lid lid lid yy yyy 647402 yy yny yy yy yy y y y 640384 640385 640387 640388 640389 640445 644611 644612 644613 644614 644615 644616 644617 y y y y y y n y n y y y y y y y y y 644750 y y y headers 644749 y 644322 y y y y y n 647401 647400 647402 yy yy yy y yyy y y y nyy y yyy yyy 640250 640251 770849 housings 640250 640251 standard standard standard 770849 housings 640250 640251 770849 housings 641202 641203 641204 641207 641208 641209 641210 644627 644628 644629 644630 644631 644632 y y y y y y y y y n y n y y y y y y headers 644633 y y y y these matrixes represent only the housing and header combinations. you also need to consider the plating on the contacts and headers. gold contacts with gold headers and tin contacts with tin headers. matrix for tin plated part numbers matrix for .000030 [0.00076] gold plated part numbers matrix for .000015 [0.00038] gold plated part numbers .156 [3.96] centerline sl-156 crimp contacts and housings mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 59 sl-156 .156 [3.96] for housings, see pages 60 and 61. contacts material and finish .012 [0.3] bright tin plated brass or phosphor bronze; .012 [0.3] pre-tin brass; or .012 [0.3] brass or phosphor bronze with .000030 [0.00076] gold over nickel (see chart) all tin-plated contacts are post lubricated to resist fretting corrosion maximum insulation diameter is .105 [2.67] wire range is 18-30 awg [0.9-0.06 mm 2 ] application note part no. 640252 has a higher mating and un- mating force than part no. 350980 and is recom- mended to be used only in housings with 1 through 12 positions. part no. 350980 can be used in any size housing but is recommended to be used in housings with 13 through 24 positions. part no. 770476 is recom- mended for use in any size housing. its mating force is similar to part no. 350980 while unmating force is similar to 640252. .115 [2.92] .121/.115 [3.07/2.92] .145/.140 [3.68/3.56] .230 [5.84] .180 [4.57] .131 ?004 [3.33 ?.10 ] a high force (6.5 amp max. current rating) b low force (6.5 amp max. current rating) c hooded (dual wipe) (10 amp. max. current rating) wire size contact material and finish part numbers awg mm 2 strip loose piece 24C30 a brass, pre-tin plated 641550-1 0.2-0.06 brass, bright tin plated 640252-1 640706-1 a brass, pre-tin plated 640252-2 640706-2 brass, rohs compliant 3-640252-1 3-640706-1 brass, bright tin plated 350980-1 640707-1 18C24 brass, pre-tin plated 350980-2 0.9-0.2 b brass, gold plated 350980-3 770258-1 brass, rohs compliant 3-350980-1 3-640707-1 phosphor bronze, bright tin plated 770476-1 770522-1 c phosphor bronze, gold plated 770476-2 770522-2 phosphor bronze, rohs compliant 3-770476-1 3-770522-1 keying plugs material (rohs compliant) ul94v-2 rated, nylon, natural color .300 [7.62] .225 [5.72] .300 [7.62] keying plug part no. 640254-1 keying pin part no. 640255-1 application tooling extraction tool part no. 90471-1 loose piece contacts pro-crimper ii hand tool part no. 58614-1 (408-4228) [for field service use only] for certi-crimp hand tool, contact technical support. strip contacts amp-o-lectric model g termination machine* applicator 680211-3 (request catalog 65828) amp-o-lectric model k termination machine* applicator 466468-2 amp-o-matic stripper-crimper machine* sca 466947-1 or 567828-1 (with cqm) (request catalog 65004) ampomator cls iv+ lead making machine* applicator 466468-1 (request catalog 82659) *requires applicators. for part numbers, call technical support. sl-156 crimp contacts and keying plugs mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 60 sl-156 .156 [3.96] housings material (rohs compliant) ul94v-0 rated, nylon, white notes: 1. accepts either .045 [1.14] square or round posts. housings mate with flat and friction lock headers, or staked posts on .156 [3.96] centers. 2. housings without ramp, with polarizing tab, available upon request. minimums may apply. 3. recommend contact: part no. 640252 for 1 thru 12 positions; part no. 350980 for 13 thru 24 positions; part no. 770476 for 1 thru 24 positions. (a) with locking ramp/with polarizing tabs (b) with locking ramp/without polarizing tabs (c) without locking ramp/without polarizingtabs .660 [16.76] .100 [2.54] .019 [0.48] .250 [6.35] 12 22 3 4 .156 [3.96] typ. .076 [1.93] typ. a .097 [2.46] .037 [0.93] ref. 12 22 3 4 .660 [16.76] .250 [6.35] .100 [2.54] .156 [3.96] typ. .076 [1.93] typ. a .037 [0.93] .097 [2.46] ref. 12 22 3 4 .660 [16.76] .250 [6.35] .156 [3.96] typ. .076 [1.93] a typ. .060 [1.52] for contacts, see page 59. for mateability options, see matrix on page 58. for mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 front bend headers only.) for mating half visuals, for connectors without lock- ing ramp, see pages 46 thru 52. no. of housing description part numbers* positions* 2C24 a with locking ramp and polarizing tabs 770849 1C24 b with locking ramp and without polarizing tabs 640250 c without locking ramp or polarizing tabs 640251 *base part number prefixes and suffixes indicate number of contact positions, e.g. 2 position = 0-xxxxxx-2 and 12 position = 1-xxxxxx-2. note: housings not for use with lid contacts. shown on page 62. note: dim. a = 0.156 (no. of positions C 1) 0.152 sl-156 housingswire-to-board mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 61 sl-156 .156 [3.96] housings material (rohs compliant) ul94v-2 rated, nylon, white .078 [1.98] .105 [2.67] pc board posts .156 [3.96] 1234 78910 1 2 3 4 7 8 9 10 [4.14 .163 + .005 C .000 + 0.13 C 0.00 .052 [1.32 ] .002 0.05 b .105 [2.67] latch cutout .015 [0.38] 4 plc. max. r. a .078 [1.98] typ. .156 [3.96] typ. .063 [1.60 ] .003 0.08 .063 [1.60 ] .003 0.08 .050 [1.27 ] .007 0.18 .075 [1.91] .250 [6.35] .125 [3.18] .660 [16.76] no. of dimensions latch location part pos. ab centered between pos. number 2 .312 1 and 2 1-770894-21 7.92 3 .468 1 and 2 1-770894-31 11.89 4 .624 2 and 3 1-770894-41 15.85 5 .780 2 and 3 1-770894-51 19.81 6 .936 3 and 4 1-770894-61 23.77 7 1.092 3 and 4 1-770894-71 27.74 8 1.248 4 and 5 1-770894-81 31.70 9 1.404 1.092 1 and 2 & 8 and 9 1-770894-91 35.66 27.74 10 1.560 1.248 1 and 2 & 9 and 10 1-770894-01 39.62 31.70 note: not for use with lid contacts. shown on page 62. recommended pc board cutout for .062 [1.57] thick pc board mates with .045 square or round staked posts only. for contacts, see page 59 . sl-156 housings with through board latch mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 62 sl-156 .156 [3.96] .054 [1.37] .095 [2.41] t yp. .156 [3.96] t yp. .054 [1.37] t yp. .0365 [.927] ref. .100 [2.54] .250 [6.35] .660 [16.76] a contacts material and finish .012 [0.3] bright tin plated phosphor bronze; .012 [0.3] phosphor bronze with .000030 [0.00076] gold over nickel (see chart) all tin-plated contacts are post lubricated to resist fretting corrosion maximum insulation diameter is .112 [2.85] wire range is 18-24 awg [0.9-0.2 mm 2 ] and a limited 16 awg [1.29-1.42 mm 2 ] (2550-2800 cma) product specifications 108-1049-1 and 108-1049-2 application specification 114-1021 application tooling extraction tool part no. 90471-1 loose piece contacts pro-crimper ii hand tool part no. 91368-1 [18-24 awg] part no. 91369-1 [16 awg] (for field service use only.) for certi-crimp hand tool, contact technical support. strip contacts amp-o-lectric model g termination machine* applicator 1385048-3 [18-24 awg] applicator 1385219-3 [16 awg] amp-o-lectric model k termination machine* applicator 1385048-2 [18-24 awg] applicator 1385219-2 [16 awg] housings material (rohs compliant) ul 94v-0 rated, nylon, white notes: 1. accepts standard and lid contacts. 2. larger opening in housings eases contact insertion when using wires that have large insulation diameters (.100-.112 [2.54-2.84]). 3. housings are not end-to-end stackable. for mateability options, see matrix on page 58. for mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 front bend headers only.) for mating half visuals, for connectors without locking ramp, see pages 46 thru 52. part numbers* no. of description housings positions* with larger openings for oversize wire 1-24 without locking ramp 647400 or polarizing tabs with locking ramp and 647401 without polarizing tabs (shown above) 2C24 with locking ramp and 647402 polarizing tabs *base part number prefixes and suffixes indicate number of contact positions, e.g. 2 position = 0-xxxxxx-2 and 12 position = 1-xxxxxx-2. wire part numbers size material plating for lid* wire strip loose piece phosphor tin 647406-1 647409-1 18-24 awg bronze gold 647406-2 647409-2 rohs compliant 3-647406-1 3-647409-1 16 awg phosphor tin 647466-1 647485-1 (2550-2800 cma only) bronze gold 647466-2 647485-2 rohs compliant 3-647466-1 3-647485-1 *large insulation diameter (.100-.112 [2.54-2.84]) notes: 1. for information on application tooling, call technical support. 2. can not be used with standard sl-156 housings, must be used with lid housings only. .160 [4.06] .112 [2.84] .108 [2.74] .524 [13.30] .143 hooded (dual wipe) (10 amp max. current rating) *for additional part numbers and information contact technical support. note: dim. a = 0.156 (no. of positions C 1) 0.19 sl-156 housings and contacts for large insulation diameter (lid) wire mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 63 amp ep .156 [3.96], .200 [5.08] and .312 [7.92] product facts .156 [3.96], .200 [5.08] and .312 [7.92] centerline wire-to-board connectors comprised of plug housings, receptacle contacts for discrete wire, and mating post headers hooded contact designed to accept wire with insulation diameters up to .118 [3.00] positive locking feature built into header back wall locking mechanism on connector housing maximizes retention number of positions: 1 to 11 for .156 [3.96] centerline; 2 to 12 for .200 [5.08] centerline; and 2 to 5 for .312 [7.92] centerline straight, through-hole headers positive latch design for easier mating and unmating polarization tabs help prevent post misalignment and mismating low-profile mating height of .641 [16.3] for 2 to 11 positions straight headers are end-to- end stackable to conserve pcb space header packaging: bulk pack and tube loaded plug housings and post headers intermateable with jst vh connectors directive 2002/95/ec (rohs compliant recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 applications household appliances, garage door openers, power supplies, power connections, or other areas requiring additional connector retention r r amp economy power (ep) connectors are designed for secondary power circuit applications. they consist of wire-to-pc board plug housings (for receptacle contacts) and mating post headers. three contact centerline spacings are available: .156 [3.96], .200 [5.08] and .312 [7.92]. during mating, the positive locking lever on the outside of the plug housing engages the mating header housing to provide for greater retention. this helps maintain reliable connections, when other non-locking type connec- tors could vibrate apart. this same locking lever must be depressed to unmate the connectors. the locking mechanism is also located high enough to help avoid interference with pc board clear plastic coating (potting), which is a common treatment for many home appliances. headers with .156 [3.96] centerline are offered in 2 through 11 positions; 2 through 12 positions for .200 [5.08] centerline; and .312 [7.92] centerline are available in 2 through 5 positions. both versions are provided in bulk pack or in tubes for automatic machines. the slim, straight, post headers are stackable end- to-end for greater flexibility when designing pc board configurations. the mating height of a low-profile plug and vertical header is .642 [16.3]; even the 1-position high-profile style measures only .732 [18.6] above the pc board. compact dimensions like these are well suited for most applications in con- fined spaces. performance characteristics voltage rating 250 vac current rating 7.5 amp max. (2 to 11 pos.), 8 amp max. (1 pos.) low level overall resistance C initial 10 m ? max. final 20 m ? max. dielectric withstanding voltage 1.5 kv ac, 1 min. insulation resistance initial 1000 m ? min. final 500 m ? min. durability 50 mating and unmating cycles operating temperature -13?f to +221?f [-25c to +105c] wire size range 18-22 awg [0.89-0.30 mm 2 ] insulation diameter .118 [3.00] max. technical documents product specification 108-5609 application specification 114-5253 instruction sheet 411-5899 amp economy power (ep) wire-to-board connector system mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 64 amp ep .156 [3.96] contacts and plug housings, low-profile crimp, snap-in receptacle contacts material and finish (rohs compliant) see chart. related product data plug housings pages 64, 67 and 69 plug housings, low-profile material and finish (rohs compliant) housing ul 94v-0 rated nylon, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. related product data contacts see above mating post headers pages 65 and 66 .083 [2.11] .055 [1.40] .08 [2.1 .362 [9.19] .382 [9.70] .154 [3.91] .039 [1.00] .524 [13.31] .284 [7.21] .224 [5.69] .156 [3.96] .150 [3.81] (3-11 pos.) .295 [7.49] .039 [1.00] .059 [1.50] a (2 pos.) .142 [3.61] section x-x circuit no. 1 number of dimension part positions a number 2 .310 [ 7.86] 1-1123722-2 3 .465 [11.82] 1-1123722-3 4. 621 [15.78] 1-1123722-4 5. 777 [19.74] 1-1123722-5 6 .933 [23.70] 1-1123722-6 7 1.089 [27.66] 1-1123722-7 8 1.245 [31.62] 1-1123722-8 9 1.401 [35.58] 1-1123722-9 10 1.557 [39.54] 1-1123722-0 11 1.713 [43.50] 1-1123722-1 12 1.878 [47.70] 1-647690-2* * consult product drawing for dimensional detail. applicator part number wire size wire material part ampomator amp-o-lectric range insulation and number cls iv+ terminator awg mm 2 diameter finish strip loose lead maker model k model g form piece base part no. part no. part no. 356500 1-471273-3 354500-1 phos. brz., 1123721-1 1318912-1* 18C22 0.89-0.30 .067-.118 pre-tin 1385286-1 1385286-2 1385286-3 1.70-3.00 brass, 1123721-2 pre-tin * for 18C20 awg, use straight action hand tool (saht) part number 91579-1. amp economy power (ep) wire-to-board connector system (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 65 amp ep .156 [3.96] straight and right-angle low-profile post headers .156 [3.96] centerline material and finish (rohs compliant) housing ul 94v-0 rated natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. post tin-plated brass related product data mating plug housings page 64 number of dimension part number positions a bulk pack tube loaded (pcs. per tube) bulk pack with pegs 2 .310 [ 7.86] 1-1123723-2 1-1318300-2 (61) 1744057-2 3 .465 [11.82] 1-1123723-3 1-1318300-3 (40) 1744057-3 4. 621 [15.78] 1-1123723-4 1-1318300-4 (30) 1744057-4 5. 777 [19.74] 1-1123723-5 1-1318300-5 (24) 1744057-5 6 .933 [23.70] 1-1123723-6 1-1318300-6 (20) 1744057-6 7 1.089 [27.66] 1-1123723-7 1-1318300-7 (17) 1744057-7 8 1.245 [31.62] 1-1123723-8 1-1318300-8 (15) 1744057-8 9 1.401 [35.58] 1-1123723-9 1-1318300-9 (13) 1744057-9 10 1.557 [39.54] 1-1123723-0 1-1318300-0 (12) 1-1744057-0 11 1.713 [43.50] 1-1123723-1 1-1318300-1 (11) 1-1744057-1 12 1.871 [47.52] 1-647689-2* 1-1744057-2 * consult product drawing for dimensional detail. p ost no. 1 .028 [0.7] .244 [6.2] .118 [3.0] .146 [3.7] .303 [7.7] .077 [1.95] .045 [1.14] sq. post .077 [1.95] .156 [3.96] centerline .268 [6.8] .335 [8.5] a straight .156 [3.96] centerline material and finish (rohs compliant) housing ul 94v-0 rated nylon, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. post tin-plated brass related product data mating plug housings page 64 number of dimension part number positions a 2 .312 [ 7.92] 647676-2 3 .468 [11.88] 647676-3 4. 624 [15.84] 647676-4 5. 780 [19.80] 647676-5 6 .935 [23.76] 647676-6 7 1.091 [27.72] 647676-7 8 1.247 [31.68] 647676-8 9 1.403 [35.64] 647676-9 10 1.559 [39.60] 1-647676-0 11 1.715 [43.56] 1-647676-1 12 1.871 [47.52] 1-647676-2 a .339 [8.60] .272 [6.90] .020 [0.50] .126 [3.20] .142 [3.60] .323 [8.20] .339 [8.60] .370 [9.40] .126 .004 [3.20 0.10 ] .079 .004 [2.00 0.10 ] .045 [1.14] ref. .156 [3.96] .045 [1.14] post no. 1 sq. post right-angle edge of board . .350 [8.89] ? .065/.069 [1.65/1.75] typ. .156 [3.96] . recommended pc board layout amp economy power (ep) wire-to-board connector system (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 edge of board .190 [4.82] .125 [3.18] typ. .156 [3.96] .069/.065 [1.75/1.65] .066/.062 [1.68/1.57] typ. .078 [1.98] recommended mounting hole pattern for .063 [1.6] thick pc board 66 amp ep .156 [3.96] straight and right-angle low-profile post headers, high temperature .156 [3.96] centerline material and finish (rohs compliant) housing ul 94v-0 rated nylon, high temperature, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. post tin-plated brass related product data mating plug housings page 64 .156 [3.96] centerline material and finish (rohs compliant) housing ul 94v-0 rated nylon, high temperature, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. post tin-plated brass related product data mating plug housings page 64 straight right-angle number of dimension part number positions a 2 .312 [ 7.92] 1744055-2 3 .468 [11.88] 1744055-3 4. 624 [15.84] 1744055-4 5 .780 [19.80] 1744055-5 6 .935 [23.76] 1744055-6 7 1.091 [27.72] 1744055-7 8 1.247 [31.68] 1744055-8 9 1.403 [35.64] 1744055-9 10 1.559 [39.60] 1-1744055-0 11 1.715 [43.56] 1-1744055-1 number of dimension part number positions a 2 .312 [ 7.92] 1744056-2 3 .468 [11.88] 1744056-3 4. 624 [15.84] 1744056-4 5. 780 [19.80] 1744056-5 6 .935 [23.76] 1744056-6 7 1.091 [27.72] 1744056-7 8 1.247 [31.68] 1744056-8 9 1.403 [35.64] 1744056-9 10 1.559 [39.60] 1-1744056-0 11 1.715 [43.56] 1-1744056-1 12 1.871 [47.52] 1-1744056-2 maximum temperature rating: 280c a .339 [8.60] edge of board .575 [14.60] .156 [3.96] typ. .045 [1.14] sq. post typ. .059 [1.51] .323 [8.21] .156 [3.96] .225 [5.72] ? .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] .145 [3.69] post no. 1 a .339 [8.60] edge of board .617 [15.68] .059 [1.51] .323 [8.21] .142 [3.60] .350 [8.89] ? .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] post no. 1 .156 [3.96] typ. typ. .156 [3.96] .045 [1.14] sq. post recommended pc board layout recommended pc board layout amp economy power (ep) wire-to-board connector system (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 amp ep .200 [5.08] 67 plug housings and post headers plug housings .200 [5.08] centerline material and finish (rohs compliant) housing ul 94v-0 rated nylon, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. related product data contacts page 64 mating post headers see below a .406 [10.30] .263 [8.88] .051 [1.30] .200 [5.08] .051 [1.30] .053 [1.35] typ. typ. circuit no. 1 number of dimension part positions a number 2 .353 [ 8.98] 1744036-2 3 .553 [14.06] 1744036-3 4 .753 [19.14] 1744036-4 5. 953 [24.22] 1744036-5 6 1.153 [29.30] 1744036-6 7 1.353 [34.38] 1744036-7 8 1.553 [39.46] 1744036-8 9 1.753 [44.54] 1744036-9 10 1.953 [49.62] 1-1744036-0 11 2.153 [54.70] 1-1744036-1 12 2.353 [59.78] 1-1744036-2 post headers .200 [5.08] centerline material and finish (rohs compliant) housing ul 94v-0 rated nylon, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. posttin-plated brass related product data mating plug housings see above number of dimension part number positions a straight right-angle 2 .302 [ 7.68] 1744037-2 1744048-2 3 .502 [12.76] 1744037-3 1744048-3 4 .702 [17.84] 1744037-4 1744048-4 5 .902 [22.92] 1744037-5 1744048-5 6 1.102 [28.00] 1744037-6 1744048-6 7 1.302 [33.08] 1744037-7 1744048-7 8 1.502 [38.16] 1744037-8 1744048-8 9 1.702 [43.24] 1744037-9 1744048-9 10 1.902 [48.32] 1-1744037-0 1-1744048-0 11 2.102 [53.40] 1-1744037-1 1-1744048-1 12 2.302 [58.48] 1-1744037-2 1-1744048-2 a .339 [8.60] .575 [14.60] .200 [5.08] typ. typ. .323 [8.21] .200 [5.08] ? .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] .059 [1.51] .146 [3.70] post no. 1 recommended pc board layout sq. post .045 [1.14] a .339 [8.60] edge of board .059 [1.51] .323 [8.21] .142 [3.60] .669 [17.00] ? .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] post no. 1 ref. max. 2 plcs. .080 [2.02] sq. post .045 [1.14] .200 [5.08] typ. recommended pc board layout amp economy power (ep) wire-to-board connector system (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 amp ep .312 [7.92] 68 straight post headers, low-profile .312 [7.92] centerline material and finish (rohs compliant) housing ul 94v-0 rated natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. post tin-plated brass related product data mating plug housings page 64 number of dimension part number positions a bulk pack tube loaded (pcs. per tube) 2 .465 [11.82] 1-1123724-2 1-1318301-2 (40) 3. 777 [19.74] 1-1123724-3 1-1318301-3 (24) 4 1.089 [27.66] 1-1123724-4 1-1318301-4 (17) 5 1.401 [35.58] 1-1123724-5 1-1318301-5 (13) a .077 [1.95] .028 [0.7] .312 [7.92] centerline .077 [1.95] .045 sq. post [1.14] .244 [6.2] .118 [3.0] .146 [3.7] .303 [7.7] .312 [7.92] centerline recommended pc board layout acceptable board thickness .062 [1.57] .063 +.004/-0 dia. punched hole [1.60 +0.1/-0] .065 +.004/-0 dia. drilled hole [1.65 +0.1/-0] .335 [8.5] .268 [6.8] p ost no. 1 mating height (low-profile) mating height .642 [16.3] amp economy power (ep) wire-to-board connector system (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 amp ep high-profile 1 position 69 plug housing and post header, high-profile 1 position plug housing part number 1-1123823-1 material and finish (rohs compliant) housing ul 94v-0 rated nylon, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. related product data contacts page 64 mating post header see below 1 position post header, straight part numbers 1-1123824-1 (bulk pack) 1-1318831-1 (tube loaded, 55 pcs. per tube) material and finish (rohs compliant) housing ul 94v-0 rated nylon, natural color note: alternate colors available upon request. minimums may apply. please contact product engineer or product manager for details. post tin-plated brass related product data mating plug housing see above .571 [14.5] .244 [6.2] .169 [4.3] .224 [5.7] .039 [1.0] .150 [3.8] .207 [5.3] section x-x recommended pc board layout acceptable board thickness .062 [1.57] soldering side component mounting side section x-x .528 [13.4] .327 max. [8.3] urethane coating area .337 [8.55] .146 [3.7] .118 [3.0] .079-.032 .004 [2-0.8 0.1] .079-.051+.004/-0 [2-1.3+0.1/-0] .079-.142 .004 [2-3.6 0.1] .315 .004 [8.0 0.1] .158 .004 [4.0 0.1] .128 [3.25] .189 [4.8] .045 [1.14] sq. post pc board eyelet .118 [3.0] .347 [8.8] .252 [6.4] .154 [3.9] max. dia. .197 [5.0] max. dia. .063 +.004/-0 dia. punched hole [1.60 +0.1/-0] .065 +.004/-0 dia. drilled hole [1.65 +0.1/-0] mating height (high-profile) mating height .732 [18.6] potting height .327 [8.3] max. retention lock amp economy power (ep) wire-to-board connector system (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 70 mta wire selection proper wire selection is critical to the success of a wire-to- board application. the chart identifies wires that have been evaluated and approved by the product engineering section. if you plan to use a wire not on the approved list, please submit a sample 12" length of wire to tyco electronics for evaluation. awg metric equivalents 18 0.8 C0.9 mm 2 20 0.5 C0.6 mm 2 22 0.3 C0.4 mm 2 24 0.2 mm 2 26 0.12 C0.15 mm 2 28 0.08 C0.09 mm 2 product specifications 108-1050 mta-100 connectors 108-1050- 1 mta-100 posted connectors 108-1051 mta-156 connectors 108-1219 mta-156 quad connector system 108-106 5 mta-156 posted connectors 108-1058 mta-156 card edge connectors application specifications 114-1019 mta-100 connectors 114-1020 mta-156 connectors 114-1031 mta-100 ribbon cable connector assembly 114-1032 mta-156 ribbon cable connector assembly 114-1048 mta-156 quad connector mta connectors approved wire listing mta-100 connectors wall approved wire awg ul 1007 pvc insulation .015 [0.381] 22, 24, 26, 28 ul 1061 semi-rigid pvc insulation .009 [0.229] 22, 24, 26, 28 ul 1095 semi-rigid pvc insulation .012 [0.305] 24 ul 1371 teflon insulation tfe .006 [0.152] 22, 26 ul 1429 irradiated pvc x.l.p.v.c. .010 [0.254] 22, 24, 26, 28 ul 2464 pvc .013 [0.330] 24 ul 3265 irradiated polyethylene x.l.p.e. .010 [0.254] 22, 24 ul 3266 irradiated polyethylene x.l.p.e. .015 [0.381] 22, 24 mil-w-16878, type b-pvc insulation .010 [0.254] 22 ul 1213 teflon insulationt.f.e. .010 [0.254] 22 mta-156 connectors ul 1007 pvc insulation .015 [0.381] 18, 20, 22, 24 ul 1061 semi-rigid pvc insulation .009 [0.229] 18, 20, 22, 24 ul 1180 teflon insulation t.f.e. .015 [0.381] 22 ul 1213 teflon insulation t.f.e. 010 [0.254] 18, 22, 24 ul 1316 pvc/nylon wall .015 [0.381] 18, 22 ul 1429 irradiated pvc x.l.p.v.c. .010 [0.254] 18, 20, 22, 24 ul 1430 irradiated pvc x.l.p.v.c. .015 [0.381] 18, 20, 22, 24 ul 1569 pvc .015 [0.381] 18 ul 3265 irradiated polyethylene x.l.p.e. .010 [0.254] 22 ul 3266 irradiated polyethylene x.l.p.e. .015 [0.381] 18, 20, 22, 24 note: when selecting approved wire styles noted on this list, the mta application specifications guidelines must be followed. also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recom- mend evaluating the wire selected before final application approval. teflon is a trademark of e.i. dupont de nemours and company. mta-100 ribbon cable preparation mta-156 ribbon cable preparation ? the dimensions shown represent the recommended minimum and maximum for notches; the actual dimension will depend on your application requirements. notes: 1. cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the requirements specified in these figures. conductor shall not be exposed after notching, nor shall individual wire stands be cut or nicked. 2. u.l. style #2651 ribbon cable is approved for use with mta-100 and mta-156 connectors per application specification 114-1031 and 114-1032. ribbon cable cable edge-to-end alignment (ends of the cable shall be prepared as indicated in this figure) .400-.800? [10.16-20.32] feed-thru notch dead-end notch .036-.046 standard (.046-.052 allowable for 26-28 awg wire only) .280-.450? [7.112-11.43] .036-.046 standard (.046-.052 allowable for 26-28 awg wire only) .500-1.000? [12.70-25.40] feed-thru notch flush-mount notch .400-.600? [10.16-15.24] .062-.080 [1.57-2.03] .062-.080 [1.57-2.03] .064 [1.63] typ. (max.) after notching .050 [1.27] dia. (max.) for mass terminating .100 [2.54] (typ.) insulation conductor web .094 [2.39] typ. (max.) after notching .070 [1.78] dia. (max.) for mass terminating .156 [3.96] (typ.) insulation conductor web ribbon cable end view C a C .010 a per inch of cable width notes: 1. for mta cable assemblies contact us engineering cable assembly group. 2. for idc cable, see pages 71 thru 74. mta wire selection mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 product facts compatible with a variety of insulation displacement connectors available on .025 [0.63], .0394 [1.00], .050 [1.27], .100 [2.54] and .156 [3.96] centerline color code edge mark on conductor #1 gray flame retardant flexible pvc insulation insulation rated for temperature of -20c to +105c recognized under the component program of underwriters laboratories inc., file no. e53793 r tyco electronics corporation has an expanding array of madison cable planar pvc insulated product designed for compatibility with a variety of insulation displacement connectors. amp idc terminations offer a quick, reliable, cost-effec- tive cabling system which can be automated. the .100 [2.54] centerline cable is available in 28 to 22 awg, either as tinned or as overcoated tinned wire, in 2 to 28 conductors. the .156 [3.96] centerline is available in 22 awg and 18 awg, either as tinned or overcoated tinned, in 2 to 24 conductors. idc ribbon cable is produced to tighter stan- dards than usually required for high yield insulation displacement terminations. the extra precision offers uncomplicated operation in fully automatic stripping, notching and termination equipment. 71 idc ribbon cable .050 [1.27] centerline, idc ribbon cable product specifications voltage rating 30 vac component recognized by ul to us and canadian standards awm style 2651 sizes 26 awg , 7/34 tinned copper, pvc insulation (9 C 64 conductors), 500-ft reels (base amp part number 57034) 28 awg , 7/36 tinned copper, pvc insulation (9 C 64 conductors), 100-ft reels (base amp part number 57040) and 500-ft reels (base amp part number 971111) 30 awg , other conductor counts avail- able on request. for ordering informa- tion, call toll-free: 1-877-623-4766 or visit: http://www.madisoncable.com/ fsproducts.htm idc ribbon cable mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 72 idc ribbon cable no. of dimensions part conductors abc number 28 awg 7/32 tinned copper 2 0.100 [2.54] 0.200 [5.08] 0.044 [1.12] 02wfy00006p 5 0.400 [10.16] 0.500 [12.70] 0.044 [1.12] 05wfy00006p 10 0.900 [22.86] 1.000 [25.40] 0.044 [1.12] 10wfy00006p 15 1.400 [35.56] 1.500 [38.10] 0.044 [1.12] 15wfy00006p 20 1.900 [48.26] 2.000 [50.80] 0.044 [1.12] 20wfy00006p 25 2.400 [60.96] 2.500 [63.50] 0.044 [1.12] 25wfy00006p 28 2.700 [68.58] 2.800 [71.12] 0.044 [1.12] 28wfy00006p 26 awg 7/34 tinned copper 2 0.100 [2.54] 0.200 [6.08] 0.039 [.99] 02wey00008p 5 0.400 [10.16] 0.500 [12.70] 0.039 [.99] 05wey00004p 10 0.900 [22.86] 1.000 [25.40] 0.039 [.99] 10wey00012p 15 1.400 [35.56] 1.500 [38.10] 0.039 [.99] 15wey00002p 20 1.900 [48.26] 2.000 [50.80] 0.039 [.99] 20wey00008p 25 2.400 [60.96] 2.500 [63.50] 0.039 [.99] 25wey00008p 28 2.700 [68.58] 2.800 [71.12] 0.039 [.99] 28wey00008p 26 awg 7/34 overcoated tinned copper 2 0.100 [2.54] 0.200 [5.08] 0.039 [.99] 02wey00007p 5 0.400 [10.16] 0.500 [12.70] 0.039 [.99] 05wey00007p 10 0.900 [22.86] 1.000 [25.40] 0.039 [.99] 10wey00007p 15 1.400 [35.56] 1.500 [38.10] 0.039 [.99] 15wey00007p 20 1.900 [48.26] 2.000 [50.80] 0.039 [.99] 20wey00007p 25 2.400 [60.96] 2.500 [63.50] 0.039 [.99] 25wey00007p 28 2.700 [68.58] 2.800 [71.12] 0.039 [.99] 28wey00007p other conductor counts available on request. product specifications voltage rating 300 volts ul recognized awm style 2651 csa available on request edge mark .100 [2.54] typ. insulation gray flame retardant flexible pvc .007 [0.17] minimum insulation thickness temperature rating -20c to +105c flammability ul: vw1 .010 [0.25] .050 [1.27] typ. b c a contact madison cable ( 1-877-madison ), a division of tyco electronics corporation, for engineering questions or for order placement of this cable. 24 awg 7/32 overcoated tinned copper 2 0.100 [2.54] 0.200 [5.08] 0.044 [1.12] 02wfy00007p 5 0.400 [10.16] 0.500 [12.70] 0.044 [1.12] 05wfy00007p 10 0.900 [22.86] 1.000 [25.40] 0.044 [1.12] 10wfy00007p 15 1.400 [35.56] 1.500 [38.10] 0.044 [1.12] 15wfy00007p 20 1.900 [48.26] 2.000 [50.80] 0.044 [1.12] 20wfy00007p 25 2.400 [60.96] 2.500 [63.50] 0.044 [1.12] 25wfy00007p 28 2.700 [68.58] 2.800 [71.12] 0.044 [1.12] 28wfy00007p 22 awg 7/30 tinned copper 2 0.100 [2.54] 0.200 [5.08] 0.051 [1.30] 02wgy00001p 5 0.400 [10.16] 0.500 [12.70] 0.051 [1.30] 05wgy00006p 10 0.900 [22.86[ 1.000 [25.40] 0.051 [1.30] 10wgy00002p 15 1.400 [35.56] 1.500 [38.10] 0.051 [1.30] 15wgy00006p 20 1.900 [48.26] 2.000 [50.80] 0.051 [1.30] 20wgy00006p 25 2.400 [60.96] 2.500 [63.50] 0.051 [1.30] 25wgy00006p 28 2.700 [68.58] 2.800 [71.12] 0.051 [1.30] 28wgy00006p no. of dimensions part conductors a bc number .100 [2.54] centerline, idc ribbon cable, pvc insulation mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 edge mark .156 [3.96] typ. insulation gray flame retardant flexible pvc .007 [0.17] minimum insulation thickness temperature rating C20c to +105c flammability ul: vw1 .010 [0.25] .078 [1.98] typ. b a c product specifications voltage rating 300 volts ul recognized awm style 2651 csa available on request no. of dimensions part conductors abc number 22 awg 7/30 tinned copper 2 0.156 [3.96] 0.312 [7.92] 0.051 [1.30] 02wgy00008p 5 0.624 [15.85] 0.780 [19.81] 0.051 [1.30] 05wgy00008p 10 1.404 [35.66] 1.560 [39.62] 0.051 [1.30] 10wgy00008p 15 2.184 [55.47] 2.340 [59.44] 0.051 [1.30] 15wgy00008p 20 2.964 [75.29] 3.120 [79.25] 0.051 [1.30] 20wgy00008p 24 3.588 [91.14] 3.744 [95.10] 0.051 [1.30] 24wgy00008p 18 awg 7/26 tinned copper 2 0.156 [3.96] 0.312 [7.92] 0.068 [1.73] 02wjy000001p 5 0.624 [15.85] 0.780 [19.81] 0.068 [1.73] 05wjy000010p 10 1.404 [35.66] 1.560 [39.62] 0.068 [1.73] 10wjy000010p 15 2.184 [55.47] 2.340 [59.44] 0.068 [1.73] 15wjy000010p 20 2.964 [75.29] 3.120 [79.25] 0.068 [1.73] 20wjy000010p 24 3.588 [91.14] 3.744 [95.10] 0.068 [1.73] 24wjy000010p other conductor counts available on request. contact madison cable (1-877-madison ), a division of tyco electronics corporation, for engineering questions or for order placement of this cable. 73 idc ribbon cable .156 [3.96] centerline, flat ribbon cable, pvc insulation mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 74 idc ribbon cable in addition to bulk cable, the us engineering cable assembly group offers prepared cable for the .100 [2.54] and .156 [3.96] cen- terline cables. this can be in the form of prenotched cable on reels or cut-to- length cable segments. prenotched 250 foot reels of cable can be produced with notches at varying increments or repeating all along the cable. the maxi- mum width of these cables is 20 conductor for the .100 [2.54] centerline and 13 conductor for the .156 [3.96] centerline. prepared cable is also available with a strip and retain feature allowing the cable assembly to be sol- dered directly to the pc board. this saves space and cost and reduces spare parts inventory. strip and retain on both ends is used in family board appli- cations to maintain the electrical connection when the pc board is separated into smaller boards after soldering. widths are limited to 20 conductors for the .100 [2.54] centerline and 13 conductors for the .156 [3.96] centerline. however, multiple cables can be placed side-by-side in a single connector. for other styles and configurations contact the product engi- neer or product manager. prepared idc ribbon cable mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 insulation strain relief conductor insulation will be contained within the confines of the insulation strain relief as indicated b min. a top of contact conductor bare wires will not be visible beyond back of housing centerline of conductor back of housing bare wires will not extend above top of contact choose the appropriate mta connector from the mta catalog 82056. select the proper wire style and awg for the chosen mta connector (refer to pages 70-74). choose the mta termination tooling (refer to pages 76-79). terminate the wire-to-mta connector per application tooling instruction sheet. inspect the mta wire termination per application specification, especially the wire depth. see illustrations: 114-13072 mta-50 connectors, 114-1019 mta-100 connectors, 114-102 0 mta-156 connectors, posted connector, card edge, 114-1048 mta-156 quad connectors, 114-1031 mta-100 ribbon cable connector assembly, and 114-1032 mta-156 ribbon cable connector assembly. adjust the termination tooling (if needed) per tooling instruction sheet (repeat the step above). connector ab mta-100 .069C.087 .040 [1.75-2.21] [1.02] mta-156 .090C.113 .060 [2.29-2.87] [1.52] 75 mta wire termination flowchart mta wire termination flowchart mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 76 application tooling manual arbor frame (with slide) part number 1583518-1* upper tooling part number 1583514-1* fixture, discrete wire, closed end part number 1583515-1 (28-26 awg) part number 1583515-2 (30-28 awg) fixture, discrete wire, feed-thru part number 1583516-1 (28-26 awg) part number 1583516-2 (30-28 awg) fixture, ribbon cable, closed end or feed-thru part number 1583517-1 *required, plus appropriate fixture(s). one-at-a-time termination tooling part numbers note: max. insulation outside diameter wire: .060 [1.52] for mta-100 connectors /.095 [2.41] for mta-156 connectors mta-100 and mta-156 mass termination tooling part numbers note: max. insulation outside diameter wire: .050 [1.27] for mta-100 connectors /.070 [1.78] for mta-156 connectors harness board holding fixture interchangeable head mta connector interchangeable head used with and tape feed track assembly part number used with part number applicator tooling part number used with assembly assembly closed end 58242-1 854175-1 & 312522-1 58242-3 58575-1 854200-1 (base) feed thru 58644-1 (discrete wire) ? 58074-1 (man hd tl) 58243-1 mta-100 58644-2 (notched cable) ? 58243-3 58575-1 connector closed end 58635-1 58575-1 (posted) feed thru 58636-1 58575-1 (posted) closed end 58244-1 854176-1 & 312522-1 58244-3 58576-1 854200-1 (base) feed thru 58646-1 (discrete wire) ?? 58074-1 (man hd tl) 58245-1 mta-156 58646-2 (notched cable) ?? 58245-3 58576-1 connector card edge 59848-1 59848-3 58576-1 closed end 58009-1 (posted) 58009-2 58576-1 feed thru 58010-2 58576-1 (posted) manual bench closed end 58244-1 tool 58024-1 58244-3 58576-1 and tooling mta-156 assy 58040-1 quad 58245-1 58024-1 and feed thru tooling assy 58245-3 58576-1 58040-1 ? 2- through 12-positions. ?? 2- through 8-positions. manual bench tool 58024-1 and tooling assembly 58039-1 manual bench tool 58024-1 and tooling assembly 58040-1 interchangeable head and interchangeable head and interchangeable head loose-piece feed track tape feed track t-handle mta connector manual hand tool 58074-1 air bench mount air bench mount special maintenance assembly air hand tool 58075-1 tool 58338-1 tool 58338-1 applicator tool air bench mount tool 58338-1 electric bench electric bench electric bench machine 931800-1 machine 931800-1 machine 931800-1 mta-50 closed end 1583503-1 feed thru closed 58246-1 (standard)* n 853546-1 & 853542-1 end 58246-2 (ext wear) * 933567-1 466728-1 59803-1 mta-100 58246-3 (ribbon cable) (base) connector feed thru 58442-1 59803-1 posted 58638-1 59803-1 (closed-end) closed 58247-1 (standard)** 853547-1 & 853542-1 end 58247-2 (ext wear) 933568-1 466727-1 59804-1 mta-156 58247-3 (ribbon cable) (base) connector feed thru 58443-1 59804-1 posted 58082-1 59804-1 (closed-end) mta-156 closed 58061-1 567020-1 59839-1 card-edge end mta-156 closed 58392-1 59804-1 quad end *repair kit 856600-1 **repair kit 856600-2 notes: 1. a repair kit consists of a cam, a feed-slide sub-assembly and a locating pawl. repair kits can be made available for other inter- changeable heads. consult tyco electronics. 2. standard modular heads 58246-1 and 58247-1 are recommended for low volume use. 3. extended wear modular heads 58246-2 and 58247-2 are recommended for high volume use. 4. t-handle maintenance tools are for maintenance (field) use only. they are not rec- ommended for production. 5. some manual hand tool assemblies are available: a. order 58579-1, comprised of head 58246-1 with manual hand tool 58074-1. b. order 58580-1, comprised of head 58247-1 with manual hand tool 58074-1. c. order 58639-1, comprised of head 58638-1 with manual hand tool 58074-1. mta-50 mass termination tooling part numbers mta application tooling options mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 interchangeable head terminates one unstripped wire per cycle aligns and holds the connector in place for each termination automatically advances the connector after each termination interchangeable head and loose-piece feed track no special setup required connectors are easily loaded into feed track connectors are fed using a simple spring-loaded pusher interchangeable head and tape feed track no special setup required tape-mounted connectors are transferred from prod- uct reel to feed track by simply pulling on the free end of the carrier tape connectors are fed using a simple spring-loaded pusher special applicator connectors are easily hand loaded into feed track automatically advances the connector after each termination cannot be cycled until the connector is properly positioned manual hand tool with interchangeable head air bench mount tool with interchangeable head and foot switch air hand tool with interchangeable head electric bench machine with interchangeable head one-at-a-time termination tooling (typical tooling combinations) air bench mount tool with interchangeable head and loose-piece feed track electric bench machine with interchangeable head and tape feed track amp-o-lectric bench machine with special applicator power units manual hand tool pistol grip handle part no. 58074-1 easy to use ratchet control will not release the trigger until it is fully bottomed head may be rotated for user convenience air hand tool pistol grip pneumatic handle part no. 58075-1 light weight operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] head may be rotated for user convenience air bench mount tool bench mount power assembly part no. 58338-1 may be mounted with interchangeable head pointed up or down operated by a foot switch operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] electric bench machine idc power unit part no. 931800-1 all electric: 120 vac, 60 hz, 2 a compact, portable and quiet operated by a foot switch t-handle maintenance tool interchangeable heads and applicators (refer to page 76 for part numbers.) 77 application tooling mta application tooling options (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 78 application tooling applicator and holding fixture wires are laced into plastic combs for mass termination trims excess wire for closed-end terminations holding fixture may be mounted to a harness board applicator and tape feed track tape-mounted connectors are transferred from prod- uct reel to feed track by simply pulling on the free end of the carrier tape connectors are fed using a simple spring-loaded pusher feed stop easily adjusted for different connector sizes notch cable with up to 28 conductors for .100 centerline, and 24 conductors for .156 centerline pressure plate holds cable in position during notching scrap conveniently removed through a chute with a blast of air from a built-in air valve mass termination tooling (typical tooling combinations) manual bench tool with applicator and holding fixture manual bench tool with applicator and tape feed track air bench machine air harness tool with applicator ribbon cable notcher assembly 2700 lb air bench machine with ribbon cable notcher assembly power units manual bench tool arbor frame assembly part no. 58024-1 applicator and holding fixture can be oriented for operator convenience for closed-end or feed-thru terminations ram height (insertion depth) is easily adjusted may be bench mounted air harness tools hand-held power unit with applicator part no. 58575-1 (mta-100) part no. 58576-1 (mta-156) applicator can be rotated 360 for orientation with holding fixture insertion depth is easily adjusted operates at air pressure between 75 and 95 psi [5.17 and 6.55 bar] air bench machine pneumatic unit part no. 91112-2 operated by a foot switch operates at air pressure between 80 and 90 psi [5.52 and 6.21 bar] not recommended for notching cable with more than 14 conductors 2700 lb air bench machine part no. 312522-1 operated by a foot switch capable of exerting 2,700 lb [12,000 n] of force at minimum 80 psi [5.52 bar] air pressure may be bench mounted applicators and notcher assemblies ribbon cable notcher assembly part number wire size centerline used with awg 854449-2 26-28 .100 manual bench tool 2.54 58024-1 854449-4 22-28 .100 air bench machine 2.54 91112-2 2700 lb bench machine .156 312522-1 854449-3 18-24 3.96 amp-o-lectric bench machine 1-471273-3 (with conversion kit 690675-2) use adapter 854468-1 when putting notcher in the amp-o-lectric machine. use adapter 854468-2 when putting notcher in the 2700 lb air bench machine. mta application tooling options (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 hand tools, power units & accessories manual arbor frame (mta-50) 1583518-1 is 408-8812 2700 lb air bench machine 312522-1 cm 409-5843 upper tooling (mta-50) 1583514-1 is 408-8812 terminator assembly, "g" term 354500-1 cm 409-5842 manual arbor frame assembly 58024-1 is 408-6923 amp-o-lectric bench machine 1-471273-3 cm 409-5128 ribbon cable applicator, .100 58039-1 is 408-6685 conversion kit 690675-2 is 408-8022 ribbon cable applicator, .156 58040-1 is 408-6701 base assembly 853542-1 is 408-9636 manual hand tool 58074-1 is 408-6790 base 854200-1 is 408-9650 air bench mount tool 58338-1 is 408-9393 adapter (amp-o-lectric) 854468-1 is 408-9687 air hand tool (mta-100) 58575-1 is 408-4260 adapter (2700 lb machine) 854468-2 is 408-9687 air harness tool (mta-156) 58576-1 is 408-4260 repair kit 856600-1 is 408-9745 t-handle maintenance tool (mta-100) 59803-1 is 408-7907 repair kit 856600-2 is 408-9745 t-handle maintenance tool (mta-156) 59804-1 is 408-7907 electric bench mount tool 931800-1 cm 409-5746 air arbor frame assembly 91112-2 is 408-7763 one-at-a-time termination tooling interchangeable heads interchangeable head & loose piece feed track mta-50 mta-156 mta-100 mta-156 1583503-1 is 408-8801 58247-1 is 408-6930 933567-1 is 408-9435 933568-1 is 408-9466 mta-100 58247-2 is 408-9380 interchangeable heads & tape feed track 58246-1 is 408-6929 58247-3 is 408-4146 mta-100 mta-156 58246-2 is 408-9379 58443-1 is 408-9607 853546-1 is 408-9636 853547-1 is 408-9637 58246-3 is 408-4147 58061-1 is 408-6794 special applicators 58442-1 is 408-9603 58082-1 is 408-6795 mta-100 mta-156 58638-1 is 408-4358 58392-1 is 408-9450 466728-1 ai 408-8054 466727-1 ai 408-8054 567020-1 ai 408-8069 mass termination tooling die set assembly mta-50 mta-100 mta-156 mta-100 1583515-1 is 408-8812 58242-1 is 408-7994 58009-1 is 408-7995 854175-1 is 408-9667 1583515-2 is 408-8812 58242-3 is 408-7994 58009-2 is 408-7995 1583516-1 is 408-8812 58243-1 is 408-7994 58010-2 is 408-7995 mta-156 1583516-2 is 408-8812 58635-1 is 408-7994 58244-1 is 408-7995 854176-1 is 408-9650 1583517-1 is 408-8812 58636-1 is 408-7994 58244-3 is 408-7995 58644-1 is 408-4406 58245-1 is 408-7995 58644-2 is 408-4440 58245-3 is 408-7995 59844-1 is 408-7994 58646-1 is 408-4405 59845-1 is 408-7994 58646-2 is 408-4439 59845-3 is 408-7994 59848-1 is 408-7995 59848-3 is 408-7995 technical documents typical application rates the following is a list of technical documents covering the installation, operation, adjustment, maintenance and repair of mta application tooling. instruction sheets (is) provide instructions for assembling or applying the product. they are intended for the manufacturing assembler or operator. customer manuals (cm) provide complete, detailed instructions on the installation, operation, adjustment, maintenance and repair of complex tools and application machines. applicator instructions (ai) are similar to instruction sheets (which cover products and tools), and provide instructions for installation, adjustment and maintenance of applicators used in auto- matic and semiautomatic machines. produce 6-in. [15 cm] long jumpers, one 4-position mta-100 connector per end, discrete wire method terminations per hour manual hand tool 58074-1 with interchangeable head 58246-1 electric bench machine 931800-1 with interchangeable head 58246-1 900 electric bench machine 931800-1 with interchangeable head and loose-piece feed track 933567-1 1,100 electric bench machine 931800-1 with interchangeable head and tape feed track 853546-1 and 853542-1 (base) 1,250 apply one 4-position mta-100 feed-thru connector per assembly, discrete wire method terminations per hour manual bench tool 58024-1 with applicator and holding fixture 650 for further information about tooling call technical support. produce 6-in. [15 cm] long jumpers, one 4-position mta-100 connector per end, ribbon cable* method terminations per hour 2700 lb air bench machine 312522-1 with applicator and tape feed track 854175-1 and 854200-1 (base) 7,500 * procedure: mass terminate 12-conductor ribbon cable with three connectors per end. after terminating, separate by tearing the 12-conductor assembly into three 4-conductor assemblies. cable notching method cable ends per hour 2700 lb air bench machine 312522-1 with ribbon cable notcher assembly 854449-2 and 854468-2 (adapter) 1,000 79 application tooling mta application tooling options (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 641187 17 641188 17 641189 17 641190 15 641191 15 641192 15 641193 15 641198 15 641199 15 641200 15 641201 15 641202 46 641203 46 641204 47 641207 49 641208 48 641209 48 641210 49 641211 21 641212 21 641213 23 641214 23 641215 24 641216 24 641217 37 641218 37 641219 37 641220 37 641221 37 641222 37 641223 37 641224 37 641225 37 641226 37 641227 39 641228 39 641229 39 641230 39 641231 39 641232 39 641233 39 641234 39 641235 39 641236 39 641237 15 641238 15 641239 15 641240 15 641241 15 641242 15 641243 15 641244 15 641283 56 641284 56 641285 56 641286 56 641287 56 641288 56 641289 56 641290 56 641291 56 641292 56 part no. page 02wey00007p 72 02wey00008p 72 02wfy00006p 72 02wfy00007p 72 02wgy00001p 72 02wgy00008p 73 02wjy000001p 73 05wey00004p 72 05wey00007p 72 05wfy00006p 72 05wfy00007p 72 05wgy00006p 72 05wgy00008p 73 05wjy000010p 73 10wey00007p 72 10wey00012p 72 10wfy00006p 72 10wfy00007p 72 10wgy00002p 72 10wgy00008p 73 10wjy000010p 73 15wey00002p 72 15wey00007p 72 15wfy00006p 72 15wfy00007p 72 15wgy00006p 72 15wgy00008p 73 15wjy000010p 73 20wey00007p 72 20wey00008p 72 20wfy00006p 72 20wfy00007p 72 20wgy00006p 72 20wgy00008p 73 20wjy000010p 73 24wgy00008p 73 24wjy000010p 73 25wey00007p 72 25wey00008p 72 25wfy00006p 72 25wfy00007p 72 25wgy00006p 72 28wey00007p 72 28wey00008p 72 28wfy00006p 72 28wfy00007p 72 28wgy00006p 72 57034 71 57040 71 350980 59, 60 640250 60 640251 60 640252 59, 60 640383 46 640384 46 640385 47 640387 49 640388 48 640389 49 640426 37 640427 37 640428 37 640429 37 640430 37 640431 37 640432 37 640433 37 640434 37 640435 37 640440 15 640441 15 640442 15 640443 15 640445 48 640452 21 640453 21 640454 23 640455 23 640456 24 640457 24 640468 15 640469 15 640470 15 640471 15 640472 37 640473 37 640474 37 640475 37 640476 37 640477 37 640478 37 640479 37 640480 37 640481 37 640550 16 640551 40 640556 41 640557 41 640558 41 640559 41 640595 39 640599 39 640600 39 640601 39 640602 39 640604 39 640605 39 640606 39 640607 39 640608 39 640620 15 640621 15 640622 15 640623 15 640629 42 640630 42 640631 41 640632 41 640633 41 640634 41 640635 41 640636 17 640637 17 640638 17 640639 17 640642 16 640643 40 640706 59 640707 59 640708 17 640709 17 640859 56 640860 56 640861 56 640862 56 640863 56 640864 56 640865 56 640866 56 640867 56 640868 56 641101 57 641106 57 641113 46 641114 46 641115 47 641118 49 641119 48 641120 48 641121 49 641122 21 641123 21 641124 23 641125 23 641126 24 641127 24 641143 41 641144 41 641145 41 641146 41 641147 41 641148 37 641149 37 641150 37 641151 37 641152 37 641153 37 641154 37 641155 37 641156 37 641157 37 641168 39 641169 39 641170 39 641171 39 641172 39 641173 39 641174 39 641175 39 641176 39 641177 39 641186 17 part no. page 80 note: this index lists all cataloged parts by base no. only. complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. part number index part no. page part no. page part number index mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 641293 57 641301 39 641302 39 641303 39 641304 39 641305 39 641306 39 641307 39 641308 39 641309 39 641310 39 641311 15 641312 15 641313 15 641314 15 641425 45 641426 45 641427 45 641428 45 641429 45 641435 45 641436 45 641437 45 641438 45 641439 45 641440 42 641522 45 641523 45 641524 45 641525 45 641526 45 641533 42 641534 15 641535 15 641536 15 641537 15 641550 59 641623 42 641643 17 641644 17 641645 17 641646 17 641653 15 641654 15 641655 15 641656 15 641994 17 643067 40 643071 40 643075 16 643077 16 643498 15 643813 15 643814 15 643815 15 643816 15 643817 37 643818 37 643819 37 643820 37 643821 37 643828 15 643995 45 644020 15 644038 15 644040 15 644042 15 644043 15 644044 15 644082 37 644083 15 644284 37 644312 15 644313 15 644329 55 644370 55 644371 55 644375 55 644376 55 644377 55 644381 55 644382 55 644383 55 644387 55 644388 55 644389 55 644456 22 644457 22 644460 37 644461 37 644462 37 644463 37 644464 37 644465 39 644466 39 644467 39 644468 39 644469 39 644470 39 644471 39 644472 39 644486 30 644487 30 644488 30 644489 30 644497 15 644501 37 644502 37 644508 55 644509 55 644510 55 644511 15 644512 15 644513 15 644514 15 644540 15 644563 15 644564 15 644565 15 644566 37 644567 39 644569 39 644570 39 644572 39 644574 15 644575 15 644576 15 644577 15 644578 15 644579 15 644611 50 644612 50 644613 51 644614 51 644615 50 644616 50 644617 51 644627 50 644628 50 644629 51 644630 51 644631 50 644632 50 644633 51 644662 37 644663 37 644687 37 644694 22 644695 22 644702 15 644718 39 644720 39 644726 15 644749 46 644750 46 644751 47 644752 48 644753 48 644754 49 644755 49 644756 46 644757 46 644758 47 644759 48 644760 48 644761 49 644762 49 644763 46 644764 46 644765 47 644766 48 644767 48 644768 49 644769 49 644783 37 644791 37 644795 15 644803 30 644807 45 644809 45 644812 45 644814 45 644860 37 644861 30 644874 24 644875 24 81 part number index part no. page part no. page part no. page 644876 23 644877 23 644878 37 644884 22 644885 22 644886 22 644887 22 644888 22 644889 22 644890 22 644891 22 644892 32 644893 32 644894 32 644896 32 644897 32 644898 32 647000 20 647001 20 647002 20 647003 20 647004 20 647005 20 647006 20 647007 20 647008 20 647009 20 647010 20 647011 20 647012 20 647013 20 647014 20 647015 20 647016 20 647017 20 647018 20 647019 20 647020 20 647021 20 647022 20 647023 20 647030 20 647031 20 647032 20 647033 20 647047 27 647048 27 647050 28 647051 28 647075 27 647076 27 647078 28 647079 28 647106 29 647107 29 647108 29 647109 27 647114 27 647116 28 647117 28 647123 53 647124 53 part no. page part number index (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 647125 53 647126 53 647127 53 647128 53 647131 53 647132 53 647133 53 647134 53 647135 53 647136 53 647139 53 647140 53 647141 53 647142 53 647143 53 647144 53 647166 29 647167 29 647168 29 647295 28 647296 28 647297 28 647298 27 647299 27 647300 27 647400 62 647401 62 647402 62 647406 62 647409 62 647466 62 647476 45 647477 15 647478 37 647479 39 647480 15 647481 45 647485 62 647496 39 647497 45 647609 25 647623 25 647624 25 647625 25 647626 25 647627 25 647628 26 647629 26 647630 26 647646 47 647648 52 647649 52 647651 26 647652 26 647653 26 647676 65 647689 65 647690 64 770258 59 770476 59, 60 770522 59 770849 60 770894 61 971111 71 1123721 64 1123722 64 58009 76, 79 58010 76, 79 58024 76, 78, 79 58039 76, 79 58040 76, 79 58061 76, 79 58074 76, 77, 79 58075 76, 77 58082 76, 79 58242 76, 79 58243 76, 79 58244 76, 79 58245 76, 79 58246 76, 79 58247 76, 79 58338 76, 77, 79 58392 76, 79 58442 76, 79 58443 76, 79 part no. page 82 part number index part no. page part no. page 1123723 65 1123724 68 1123823 69 1123824 69 1318300 65 1318301 68 1318831 69 1318912 64 1375819 31 1375820 31 1445120 9 1445121 10 1445123 9 1445124 10 1445125 9 1445126 10 1445169 9 1445170 9 1445171 9 1445172 10 1445173 10 1445174 10 1445336 31 1445341 7 1445342 7 1445343 7 1445344 7 1445345 7 1445346 7 1445347 7 1445348 7 1445349 7 1445350 7 part no. page 1445351 7 1445352 7 1445353 7 1445354 7 1445355 7 1445356 7 1445357 7 1445358 7 1445359 5 1445360 5 1445361 5 1445362 5 1445363 5 1445364 5 1445365 5 1445366 5 1445367 5 1445368 5 1445369 5 1445370 5 1445371 5 1445372 5 1445373 5 1445374 5 1445375 5 1445376 5 1744017 48 1744020 15 1744036 67 1744037 67 1744048 67 1744055 66 1744056 66 part no. page application tooling part number index 58517 31 58575 76, 78, 79 58576 76, 78, 79 58579 76 58614 59 58635 76, 79 58636 76, 79 58638 76, 79 58639 76 58644 76, 79 58646 76, 79 59803 76, 79 59804 76, 79 59836 17 59837 41 59839 76 59845 79 59848 76, 79 90471 59 part no. page 91112 78, 79 91579 64 312522 76, 78, 79 354500 79 466468 59 466727 76, 79 466728 76, 79 466747 17 466947 59 471273 78, 79 567020 76, 79 567373 31 567827 31 567828 59 567910 31 680211 59 690675 78, 79 853542 76, 79 853546 76, 79 part no. page 853547 76, 79 854175 76, 79 854176 76, 79 854200 76, 79 854449 78 854468 78, 79 856600 76, 79 931800 76, 77, 79 933567 76, 79 933568 76, 79 1385286 64 1583503 76, 79 1583514 76, 79 1583515 76, 79 1583516 76, 79 1583517 76, 79 1583518 76, 79 part no. page part number index (continued) mta, cst-100 ii, sl-156 and amp economy power (ep) connectors catalog 82056 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 6-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 52-55-1106-0800 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 57-1-254-4444 uk: 44-208-420-8341 tyco electronics corporation www.tycoelectronics.com americas asia/pacific argentina C buenos aires phone: +54-11-4733-2200 fax: +54-11-4733-2211 brasil C s?o paulo phone: +55-11-2103-6000 fax: +55-11-2103-6030 chile C santiago phone: +56-2-345-0361 fax: +56-2-223-1477 canada C toronto phone: +905-475-6222 fax: +905-474-5520 product information center: phone: +905-470-4425 fax: +905-474-5525 colombia C bogota phone: +57-1-319-8959 fax: +57-1-319-8960 mexico C mexico city phone: +52-55-1106-0800 +01-800-733-8926 fax: +52-55-1106-0901 for lati n/ south american countries not shown phone: +54-11-4733-2015 fax: +54-11-4733-2083 australia C sydney phone: +61-2-9554-2600 fax: +61-2-9502-2556 product information center: phone: +61-2-9840-8200 fax: +61-2-9634-6188 india C bangalore phone: +91-80-285-40800 fax: +91-80-285-40820 indonesia C jakarta phone: +65-6482-0311 fax: +65-6482-1012 japan C kawasaki, kanagawa phone: +81-44-844-8111 fax: +81-44-812-3207 product information center: phone: +81-44-844-8013 fax: +81-44-812-3200 korea C seoul phone: +82-2-3415-4500 fax: +82-2-3486-3810 malaysia C selangor phone: +60-3-7805-3055 fax: +60-3-7805-3066 new zealand C auckland phone: +64-9-634-4580 fax: +64-9-634-4586 philippines C makati city phone: +632-848-0171 fax: +632-867-8661 peoples republic of china hong kong phone: +852-2735-1628 fax: +852-2735-0243 shanghai phone: +86-21-2407-1588 fax: +86-21-2407-1599 singapore C singapore phone: +65-6482-0311 fax: +65-6482-1012 taiwan C taipei phone: +886-2-8768-2788 fax: +886-2-8768-2268 thailand C bangkok phone: +66-2-955-0500 fax: +66-2-955-0505 vietnam C ho chi minh city phone: +84-8-930-5546 fax: +84-8-930-3443 united states harrisburg, pa phone: +1-717-564-0100 fax: +1-717-986-7575 product information center: phone: +1-800-522-6752 fax: +1-717-986-7575 troy, mi phone: +1-248-273-3359 fax: +1-248-273-3322 europe/middle east /africa austria C vienna phone: +43-1-905-60-0 fax: +43-1-905-60-1333 product information center: phone: +43-1-905-60-1249 fax: +43-1-905-60-1251 belarus C minsk phone: +375 17 237 47 94 fax: +375 17 237 47 94 belgium C kessel-lo phone: +32-16-352-300 fax: +32-16-352-355 bulgaria C sofia phone: +359-2-971-2152 fax: +359-2-971-2153 czech republic and slovakia czech republic C kurim phone: +420-541-162-111 fax: +420-541-162-223 product information center: phone: +420-541-162-113 fax: +420-541-162-132 denmark C glostrup phone: +45-43-48-04-00 fax: +45-43-44-14-14 egypt C cairo phone: +202-419-2334 fax: +202-417-7647 estonia C tartu phone: +372-5138-274 fax: +372-7400-779 finland C helsinki phone: +358-95-12-34-20 fax: +358-95-12-34-250 france C cergy-pontoise cedex phone: +33-1-3420-8888 fax: +33-1-3420-8600 product information center: phone: +33-1-3420-8686 fax: +33-1-3420-8623 france export divisions C cergy-pontoise cedex phone: +33-1-3420-8804 fax: +33-1-3420-8699 germany C bensheim phone: +49-6251-133-0 fax: +49-6251-133-1600 product information center: phone: +49-6251-133-1999 fax: +49-6251-133-1988 greece C athens phone: +30-210-9370-396/397 fax: +30-210-9370-655 hungary C budapest phone: +36-1-289-1000 fax: +36-1-289-1010 product information center: phone: +36-1-289-1016 fax: +36-1-289-1017 ireland C dublin phone: +353-1-866-5612 fax: +353-1-866-5714 israel C petach-tikva phone: +972-3-929-0999 fax: +972-3-919-1088 italy C collegno (torino) phone: +39-011-4012-111 fax: +39-011-4031-116 product information center: phone: +39-011-4012-428 fax: +39-011-40-287-428 lithuania and latvia lithuania C vilnius phone: +370-5-213-1402 fax: +370-5-213-1403 product information center: phone: +370-5-211-3016 fax: +370-5-213-1403 netherlands C s-hertogenbosch phone: +31-73-6246-246 fax: +31-73-6212-365 product information center: phone: +31-73-6246-999 fax: +31-73-6246-998 norway C nesbru phone: +47-66-77-88-50 fax: +47-66-77-88-55 poland C warsaw phone: +48-22-4576-700 fax: +48-22-4576-720 product information center: phone: +48-22-4576-704 fax: +48-22-4576-720 romania C bucharest phone: +40-21-311-3479/3596 fax: +40-21-312-0574 russia C moscow phone: +7-495-790-7902 fax: +7-495-721-1893 product information center: phone: +7-495-790-7902-404 fax: +7-495-790-7902-401 russia C st. petersburg phone: +7-812-718-8192 fax: +7-812-718-8193 slovenia C ljubljana phone: +386-1561-3270 fax: +386-1561-3240 south africa C port elizabeth phone: +27-41-503-4500 fax: +27-41-581-0440 spain C barcelona phone: +34-93-291-0330 fax: +34-93-201-7879 sweden C upplands v?sby phone: +46-8-50-72-50-00 fax: +46-8-50-72-50-01 switzerland C steinach phone: +41-71-447-0447 fax: +41-71-447-0444 turkey C istanbul phone: +90-212-281-8181/2/3 +90-212-282-513 0/ 5430 fax: +90-212-281-8184 ukraine C kiev phone: +380-44-206-2265 fax: +380-44-206-2264 product information center: phone: +380-44-206-2265 fax: +380-44-206-2264 united kingdom C stanmore, middlesex phone: +44-8706-080208 fax: +44-208-954-6234 product information center: freephone (uk only): + 0800-267-666 phone: +44-8706-080208 fax: +44-208-420-8095 global contacts tyco electronics corporation harrisburg, pa 82056C10kCmsCfpC6-08Cog3b |
Price & Availability of 5-641124-0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |